All Aluminum Alloy Conductor is used for primary and secondary overhead transmission and distribution services. This has been designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio and better sag characteristic. The conductor has a higher resistance to corrosion than ACSR. Stranded 6201-T81 high strength aluminum conductors, conforming to ASTM specifications B399 are concentric lay-stranded, similar in construction and appearance to 1350 aluminum alloy grade aluminum conductors, and has a greater resistance to abrasion than conductors of 1350 aluminum alloy
Application : AAAC All Aluminum Alloy Conductor is used for primary and secondary overhead transmission and distribution services. This has been designed utilizing a high-strength aluminum alloy to achieve a high strength-to-weight ratio and better sag characteristic. The conductor has a higher resistance to corrosion than ACSR. Standards : ASTM B399, AS1531, IEC 61089, DIN 48201, BS 3242; NFC34215, SS4240814 Construction : Stranded 6201-T81 high strength aluminum conductors, conforming to ASTM specifications B399 are concentriclay-stranded, similar in construction and appearance to 1350 aluminum alloy grade aluminum conductors, and has a greater resistance to abrasion than conductors of 1350 aluminum alloy
1.Applications AAAC have been widely used in power transmission lines with various voltage levels,and also used in power lines across great rivers,heavy ice area,and other places special geographical characteristics.The cables have excellent advantages of high strength,large current carrying capacity and good catenary property as well as wear-resistance,anti-crush and corrosion-proof with simple structure,convenient installation and maintenance,low cost for the line,large transmission capacity. 2.Specifications AAAC bear conductor meets or exceeds the following ASTM Specifications: B-398 Aluminum Alloy 6201-T81 Wire for Electrical Purpose. B-399 Concentrical-Lay-Stranded 6201-T81 Aluminum Alloy Conductors 3.Product Performance (1).The electrical performance of AAAC is indicated in DC�©/km(20oC).The resistivity of aluminum alloy wire for stranded wires is: LHA1:not greater than 32.840n�©. m LHA2:not greater than 32.530n�©. m (2).The rated tensile strength of AAAC is denoted with the result of total cross-section areas of all aluminum alloy conductors multiplied by min.Tensile strength of corresponding size specified in the standard for aluminum alloy wire. 4.Material Standard The high-strength aluminum alloy conductor used for AAAC conforms to the standard JB/T 8134-1997(equivalent to IEC 60104:1987). Construction of All Aluminum Alloy Conductor
ts of Aluminum Magnesium-Silicon alloy wires stranded in successive layers in opposite direction and the outer layer is right hand direction Z. Natural grease may be applied between the layers of AAAC except the outer layer. STAQNDARD Construction as per ASTM B399, DIN 48201, BS EN 50182, IEC 61089, CSA C49. APPLICATION: AAAC bare conductors are used for primay and secondary overhead power transmission lines having long spans and high resistance to corrosion. Detailed Product Description AAAC (All Aluminum Alloy Conductor) referred to have higher strength but lower conductivity than pure aluminum. Being lighter, alloy conductors can sometimes be used to advantage in place of the more conventional ACSR; Having lower breaking loads than the latter, their use becomes particularly favourable when ice and win loadings are low. We can supply this conductor according to different recognized standards, such as BS EN50182, IEC61089, ASTM B399DIN 48, customer special specification also can be satisfied.
http://www.zmscable.com/AAAC-Conductor.html
z
Product description Construction Acar has aluminium 1350 h-19 wires concentrically stranded around a 6201-t81 aluminium Alloy core. Typically, the 6201-t81 is the conductor core, but in certain designs, the 1350 h-19 and the 6201-t81 wires may be stranded in the same layer. Standards: Moseroth acar meets or exceeds the following astm specifications: B-230 aluminum wire, 1350-h19 for electrical purposes. B-398 aluminum-alloy 6201-t81 for electrical purposes. B-524 concentric-lay-stranded aluminum conductors, aluminum alloy reinforced acar, 1350/6201. Wooden
Aluminum Alloys
All Aluminum Conductors(AAC)-(IS-398 PART-1) Aluminum Conductors Steel Reinforced (ACSR)-(IS-398 PART-2) All Aluminum Alloy Conductors(AAAC)-(IS-398 PART-4)
ACSR Aluminum Conductor Steel Reinforced is used as bare overhead transmission cable and as primary and secondary distribution cable. ACSR offers optimal strength for line design. Variable steel core stranding for desired strength to be achieved without sacrificing ampacity. Aluminum alloy 1350-H119 wires, concentrically stranded around a steel core available with Class A, B or C galvanizing; aluminum coated (AZ); or aluminum-clad steel core (AL). Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with grease. Also available with Non Specular surface finish.
Electric wires & cables, all aluminum conductors, all aluminum alloy conductors, aluminum rod, aluminum alloy rod.
A unique product of Aluminum briquettes made from aluminum turning Aluminum contain 90% above.
We are supplier and exporter of Aluminum Alloy Ingots ADC 12 Our company supply ADC 12 and Aluminum Ingots, Origin.. India, Indonesia, Vietnam , China And Europe. PAYMENT TERM.. SBLC, LC AT SIGHT, 30/70 ICPO and BCL
Elevate your commitment to recycling with Aluminum Taint Tabor scrap sourced from post-consumer materials like sheets and plates. This scrap type ensures a closed-loop system, promoting the circular economy and reducing the environmental impact of aluminum production.
Elevate your commitment to recycling with Aluminum Taint Tabor scrap sourced from post-consumer materials like sheets and plates. This scrap type ensures a closed-loop system, promoting the circular economy and reducing the environmental impact of aluminum production.
Concentric lay stranded conductor consisting of Aluminum Alloy 1350-H19 wires. AAC conductor is also known as aluminum stranded conductor. It is manufactured from electrolytically refined aluminum, with a minimum purity of 99.7%. AAC is used mainly in urban areas where the spacing is short and the supports are close. All aluminum conductors are made up of one or more strands of aluminum wire depending on the end usage. AAC is also used extensively in coastal regions because it has a high degree of corrosion resistance
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Introducing our premium-grade aluminum billets designed for automotive precision. Crafted with precision and durability in mind, these billets serve as the raw material for manufacturing critical components in the automotive sector. Benefit from the lightweight properties and structural integrity that our aluminum billets offer for enhanced vehicle performance.
We supply Scrap Aluminium products including: Aluminum Wire Scrap,Aluminium scrap 6063 Aluminum scrap UBC(Used Beverage Cans) Aluminum wheel scrap Aluminum tense and tabor Aluminum content 99.7% -Aluminium wire scrap -Reasonable price and high purity -Timely delivery and promptly shipping -Fire deals Aluminium scrap 6063 Aluminium profile scrap 6063 Aluminum content 75%, 95%, 99.7% Aluminium content 75%, 95% 99.7% or can satisfy the demands of the customer
