ADSS Preformed Suspension Clamp The base is attached by a rear hinge for quick and easy installation of ADSS cables Cushioned pad made of UV resistant neoprene sleeve insert to gently hold the ADSS cable in place Includes stainless steel bolts and locking washers for locking clamps ADSS Suspension Clamp Suspension clamps are also called fixture suspension or suspension fittings. According to the application, the suspension clamps are divided into ABC optical cable suspension clamps, ADSS optical cable suspension clamps, and overhead line suspension clamps. ADSS Optical Cable Suspension Clamp Suspension cleats for ADSS cables are also known as prefabricated suspension cleats. Prefabricated catenary clamps that function the same as ordinary catenary clamps are designed to suspend conductors or ground wires in a vertical direction. Huaneng prefabricated suspension clamps are suitable for high voltage above 220kv. Unique features of prefabricated suspension clips: Effective protection of conductors Avoiding Electricity Waste Due to Corona easy installation Prefabricated suspension clamps are designed to protect ADSS (All Dielectric Self Supporting) cables from sloshing caused by wind currents. Suspended clamps are widely used in transmission lines, towers or power distribution systems. The distance between the two towers is called the span. For short spans, prefabricated suspension clamps with O-rings are often used. This kind of suspension clamp has the characteristics of lightest weight, convenient installation, and can protect ADSS optical cable more effectively. For mid-span and long-span, there is also a prefabricated suspension clamp that is aluminum-clad. The Armor Clip Suspension connects with U-Clips to hang cables. Aluminum-clad suspension clamps support and protect ADSS fiber optic cables from bending damage. According to the span, the short span adopts single suspension clamp, and the long span adopts double suspension clamp. Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle. Purposes: supporting cable, make the ADSS hang on the tower.
ADSS Preformed Suspension Clamp The base is attached by a rear hinge for quick and easy installation of ADSS cables Cushioned pad made of UV resistant neoprene sleeve insert to gently hold the ADSS cable in place Includes stainless steel bolts and locking washers for locking clamps ADSS Suspension Clamp Suspension clamps are also called fixture suspension or suspension fittings. According to the application, the suspension clamps are divided into ABC optical cable suspension clamps, ADSS optical cable suspension clamps, and overhead line suspension clamps. ADSS Optical Cable Suspension Clamp Suspension cleats for ADSS cables are also known as prefabricated suspension cleats. Prefabricated catenary clamps that function the same as ordinary catenary clamps are designed to suspend conductors or ground wires in a vertical direction. Huaneng prefabricated suspension clamps are suitable for high voltage above 220kv. Unique features of prefabricated suspension clips: Effective protection of conductors Avoiding Electricity Waste Due to Corona easy installation Prefabricated suspension clamps are designed to protect ADSS (All Dielectric Self Supporting) cables from sloshing caused by wind currents. Suspended clamps are widely used in transmission lines, towers or power distribution systems. The distance between the two towers is called the span. For short spans, prefabricated suspension clamps with O-rings are often used. This kind of suspension clamp has the characteristics of lightest weight, convenient installation, and can protect ADSS optical cable more effectively. For mid-span and long-span, there is also a prefabricated suspension clamp that is aluminum-clad. The Armor Clip Suspension connects with U-Clips to hang cables. Aluminum-clad suspension clamps support and protect ADSS fiber optic cables from bending damage. According to the span, the short span adopts single suspension clamp, and the long span adopts double suspension clamp. Composition: inner pre-twisted wire, the outer pre-twisted wire, rubber insert, cast aluminum shells, right-angle shackle, U-type shackle. Purposes: supporting cable, make the ADSS hang on the tower.
Wholesale ADSS Suspension Clamp An ADSS (All-Dielectric Self-Supporting) Suspension Clamp is a component used in the installation of ADSS fiber optic cables. ADSS cables are designed to be self-supporting and do not require any metallic elements for support, making them suitable for aerial installations in various environments, including power distribution lines, railways, and more. The suspension clamp is an essential part of the ADSS cable installation process, as it helps secure the cable to the supporting structures, such as poles or towers. The primary purpose of the ADSS suspension clamp is to maintain the appropriate tension on the cable while preventing excessive bending or stress that could negatively impact the cable's performance and longevity. ADSS suspension clamps are typically made of materials that are durable and resistant to environmental factors such as UV radiation, extreme temperatures, and moisture. They are designed to hold the ADSS cable securely in place while minimizing stress and strain on the cable itself. The installation process of ADSS suspension clamps involves attaching them to the support structure and then securing the ADSS cable in the clamp. This process ensures that the cable is held in the correct position and tension, optimizing its signal transmission capabilities and overall reliability. Features Durable Construction: ADSS suspension clamps are typically made from materials that are resistant to environmental factors such as UV radiation, extreme temperatures, and moisture. This durability helps ensure the longevity of the clamp in various outdoor conditions. Corrosion Resistance: The materials used in the construction of ADSS suspension clamps are often chosen for their resistance to corrosion, preventing degradation over time due to exposure to harsh weather conditions.
ADSS Cable Suspension Clamp ADSS Suspension Clamps, also known as Prefabricated Suspension Clamps or AGS Suspension Clamps, offer a full range of aluminum cladding, rubber, armored clamps, bolts, and nuts to support and protect ADSS/OPGW cables from bending damage. Armored Clamp Suspensions can be customized for different gauges, various cable sizes, wire raw materials, and armored clamp suspension design options to precisely match the clamping strength, span, and cable type requirements, including Dual Suspension Clamps, AGS Suspension Clamps, Cushion Clamp Suspension Clamps, ADSS Cable Suspension Clamps, and OPGW Suspension Clamps. adss Suspension Clamps are specifically designed for use in applications where there is a large drop in long spans, river crossings, or on hills. The double suspension clips have a vertical breaking load of 100kn. as your OEM partner for prefabricated suspension clips, we can help you save money and stay competitive. Whether it is standard, customized or different types, Huaneng Clamp Suspension offers quality solutions for all market needs.
Place of Origin -Hebei, China Product name -Suspension Clamp for ADSS Cable Cable Size -5-8mm Breaking Load -4kN Usage -Used ADSS cable Certification -ISO9001 / RoHs Service -OEM / ODM / Customized
We are leading manufacturer & Exporter of Brass shower header clamp.
Single/ double pipe clamps used for fire and safety, other installations. Can provide in mild steel with zinc plated, stainless steel etc. With or without rubber sleeves.
Power Line Suspension Clamp Power line suspension clamp protect conductors and other equipment from airborne vibrations and oscillations caused by strong winds and storms. The suspension clamps are made of galvanized steel and aluminum alloys that help resist corrosion caused by varying weather conditions in the environment. The resistance provided helps increase the durability of overhead line suspension clamps, which in turn helps reduce repair and maintenance costs. They are used along with other equipment such as bolts, nuts and washers to help secure connections on overhead lines. This helps to limit loose connections that can lead to electrocution. These devices should be made from materials similar to the conductor as they are installed near the conductor to help minimize wear and tear and friction between different devices. Suspension Clamp Component Parts The Suspension Clamp is not a single entity as it has a number of major components that make up the connection to the conductor. They are described below. Main Body- This is the frame that supports the conductor ADSS Suspension Clamp and is made of aluminum alloy which is strong and corrosion resistant. This helps in maintaining the durability of the OPGW overhanging wire clamps. Retainer- The purpose of this component is to connect the conductor of the transmission line to the body of the spiral suspension clamp. Tape - This is a rope-like structure that is responsible for transferring the load from the swing axis directly to the insulator string. Straps are well suited for this role because they are made of galvanized material, which helps them achieve their purpose. Washers - Usually used when the clamping surface is not vertical. This helps provide support for the aluminum suspension clamps and conductors. They are made of steel which helps in resisting corrosion and rust. Bolts and Nuts- Bolts and nuts are used to secure connections when using fiber optic suspension clips mechanically. They are also made of steel to provide strength and corrosion resistance. Threaded Inserts- These are the fastening elements of suspension clips that are injected into components with threaded holes to complete the connection. Threaded inserts are also made of stainless steel to resist corrosion and rust.
Design Requirements for Suspension Clamps It ensures that there is proper coordination between the physical and mechanical aspects of the suspension clamp. In addition, the design requirements ensure that all components are in the correct position. This will contribute to the smooth operation of the suspension. -Anchor Clamps First of all, you should be able to move the anchor clip next to the conductor freely. To accomplish this, make sure that the trunnion of the clamp is part of the body. -Conductor Support Slot When purchasing a suspension clamp, make sure that the conductor support slots are the correct size. Check the measurements according to the suspension clamp manufacturer's instructions. The body and keeper should be free from sharp edges or irregularities of any kind. - Design of Shoulder Straps When purchasing overhead suspension clips, check the design of the straps. Make sure that they are round and that their dimensions directly match those of the trunnions. -Design of bolts and nuts Although they may look small, they have strict design requirements. When purchasing suspension clamps or overhead cable clamps, check the position of the bolts and nuts. Make sure they are securely fastened to the clamp. They should be securely attached to prevent them from falling out during fixture operation. Design them to ensure that the robot can protrude through the threads to the outside. In addition to providing outstanding products and services, we are also passionate about educating customers on the proper application of Conductor Suspension Clamp,ADSS Cable Suspension Clamp,Overhead Line Suspension Clamp.Welcome to visit our company and factory. If you need any further assistance, please do not hesitate to contact us. The product will supply to all over the world, such as Kenya ,Palau ,Uzbekistan ,Iraq ,India . There are more than 100 jobs in our factory, and we also have a working team of 15 people to provide pre-sale and after-sale services to our customers. Welcome customers all over the world to contact us or visit our company. Thanks for the regular and new customers support. We look forward to serving you.
Helical Suspension Clamp Helical suspension clamps are mainly used to support ADSS fiber optic cable suspension wire clamps, applicable to ADSS fiber optic cables, conductors and ground lines in transmission lines, it is recommended to be used in the line with a turning angle of less than 30 degrees. Spiral pendant clamp is the ADSS fiber optic cable suspended in the transmission line tower connection fixtures, the line clamp can reduce the static stress of the cable in the suspension point, improve vibration resistance, inhibit the dynamic stress caused by wind vibration, to ensure that the cable does not exceed the permissible value of the bending of the fiber optic cable, the cable does not produce bending stress. Installation of the cable clamp can avoid all kinds of harmful stress concentration in the cable, so that the optical fiber inside the cable does not occur additional damage loss. Features ADSS cable clamps are made of aluminum alloy and aluminum clad steel spiral rod, aluminum shell and other connectors. ADSS cable clamps are mainly used for linear tower cable suspension and support, play a transfer of axial load and dispersion of axial pressure, the cable to play a good role in protecting, but also to prevent the ADSS cable due to the bending radius is too small or stress concentration and accidents. ADSS with a spiral overhanging wire clip according to the ADSS pitch length is different, divided into short pitch overhanging wire clip, single overhanging wire clip, double single point overhanging wire clip (referred to as a single overhanging wire clip), double point overhanging wire clip (referred to as a double overhanging wire clip) and so on several kinds. APPLICATIONS Substation Installation- Prefabricated tension clamps are used in substation installations to support and tension wires connecting different components of the grid. They also maintain proper tension on cables or busbars. Communication Lines- Clamps are also used in installations such as fiber optic cables or telephone lines. They help hold and tension communication cables to ensure reliable transmission of signals over long distances. Distribution Lines- Conductor clamps deliver power to residential, commercial and industrial areas to secure and support conductors. This provides the necessary tension for efficient power distribution.
Great for earring, . Also shop for jewelry & accessories at best prices . best quality and finishing
Model: AXD1280 Suitable ADSS diameter: 10.1 -11 mm Application span: max 150m Hot dip galvanizing per ISO 1461
OEM ADSS Tension Clamp Pre-twisted tension clamps are also known as pre-twisted dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC. Pre-twisted dead end is a tension clamp that plays an important role in ADSS/OPGW transmission lines. Dead-end fiber optic cable clamps are used to connect ADSS/OPGW/OPPC to overhead towers or poles. The unique design of the pre-fabricated tension clamps not only simplifies installation, but also ensures a secure cable connection. Dead-end cable clamps provide superior performance in protecting ADSS/OPGW/OPPC cables from stress point damage and preventing signal degradation during transmission. Pre-twisted tension clamps and pulling dead-end cable clamps used on conductors and ground wires are similar in appearance, but the specifications, raw materials, and strength requirements of the two types of pulling dead-end cable clamps are quite different. Although there are different design standards in different countries, we can make OEM according to customers' requirements.
Custom ADSS Tension Clamp ADSS Tension Clamps are used to connect ADSS cables to poles/towers. Armored rods provide protection and cushioning for the ADSS cables. The special design of the prefabricated rods ensures that the tension clamps do not overstress the ADSS cables, thus ensuring a normal service life of the cable system.The ADSS tension clamps are made of aluminium-clad or galvanized steel wire. Structure and raw materials Unshackle - hot-dip galvanized steel. The shackle is connected to the reinforcing bar unit. Twisted chain ring - hot dipped galvanized steel. Twisted links are used to connect the shackle to the thimble. Sleeve - hot dip galvanized cast steel. The sleeve is inserted into the unclamp of the tension clamp to provide protection and connection. Armored rod ----- Aluminum clad steel wire. Armored rods increase friction through a layer of granular emery inside the cable. The rods are shop assembled into four subsets to minimize misalignment errors and speed installation. The ends are bent outward to provide strain relief in critical cable departure areas. Prefabricated Dead Ends - Prefabricated dead ends are made from hot-dip galvanized steel wire or aluminum-clad steel wire and are assembled in the shop into a subset with a solid layer of emery to increase the grip of the tensioning clamps while reducing lateral pressure. Direction 1. Used for connecting connecting poles (towers) to terminal poles (towers), tension poles, or poles (towers) with line clamping angles of 25�° or more. Special specifications: 1 unit for each terminal pole (tower), 2 units for each tension pole (tower), and 2 units for each connecting pole (tower). You can select the specification model corresponding to the appropriate cable diameter range, maximum allowable tension (MAT) or span length from the data sheet.
ADSS Downlead Clamp DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. Downlead Clamp DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips. The downlead clamp consist of a stainless steel band and a rubber part. The stainless steel band is used to fix the rubber clip on the pole. At the same time, the rubber part fixes the optical fiber. This way, the fiber does not shake and at the same time reduces damage caused by friction. The lead wire clamps for towers have a different structure than the lead wire clamps for poles. The clamps consist of steel brackets, bolts and nuts, and rubber parts. The bolt secures the lead clip to the tower. Compared to other lead clip manufacturers, Huaneng offers the end user a wide range of lead clip design options. huaneng lead clips can be custom manufactured with a wide range of cables, materials and different connection options.
ADSS Preformed Short Span Tension Clamp Tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. China ADSS Tension Clamp ADSS tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. At the same time, the tension clamp can withstand at least 95% of the rated breaking strength of conductors and strands, and is made of high-strength materials. Composition: twisted wire, rubber insert, cast aluminum shell, right-angle shackle, U-shackle. Purposes: supporting cableï¼?make the ADSS hang on the tower. Features: 1. Component: preformed wire, rubber inserting, casting aluminum shell, right angle shackle, U shackle etc. 2. Usage: supporting,make ADSS cable hang on the pole and tower. 3. Features: a, stress on average, no concentration stress, protect cable better and increase the stiffness of cable in the mount point. b, good dynamic stress. It can provide enough grip strength(10%RTS) c, rubber inserting make abrasion low. d. excellent aluminum alloy improve the mechanical and resist-corrosion function, extend life. Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods..
NFC standard Suspension Clamp for LT and HT AB Cable.
Engineering components for automotive, electrical, construction, transmission tower projects , rail road components hardware like different types of washers, circlips & retaining rings, clips , clamps ,hose clamp , spring band clamps ,metal pressed parts, wire form parts..Manufacturing & sourcing agents
Place of Origin -Hebei, China Product Name -Suspension Clamp Type -ES 54-14 Bracket -Aluminium Alloy Clamp -Nylon Plus Glass Fibre Wire Range -16-95 mm�² Fracture Load -6-12 KN Usage -Connecting ADSS OPGW Cable Application -Overhead Line Accessories OEM/ODM -Accept OEM and ODM Package -Carton Box Package
Place of Origin Hebei, China Model Number -Adss Name -ADSS fitting/Short Span Tangential Suspension Clamp for ADSS Cable Color -Black And Silver Packaging Details -Pallet or Wooden Case Standard or Nonstandard -Nonstandard Product name -Cable clamp Material -Steel Packing -50 pcs /bag Surface Finishing -HDG Spraying Polishing OEM -Weclome
