Overview: This standalone access control card reader is specially designed for controlling the entrance of office, building, residential area, factory. Compared to other same products this one has the following advantages: Advantage: 1. Less than 0.2-second Response Speed 2. Built-in Antenna, LED (Double Color LED) and Loud Speaker (Buzzer) 3. Real Time Data Transfer 4. With Water-Proof Function 5. Production implementation in line with UL294 international standards 6. Used for office, factory staff quarters, public building and home. 7. Stable performance, resistance to metal shielding and interference ability, 8. Waterproof and rain-proof, Anti-freezing and heat protection.
Overview: This standalone access control card reader is specially designed for controlling the entrance of the office, building, residential area, factory. Compared to other same products this one has the following advantages: Advantage: 1. Less than 0.2-second Response Speed 2. Built-in Antenna, LED (Double Color LED) and Loud Speaker (Buzzer) 3. Real Time Data Transfer 4. With Water-Proof Function 5. Production implementation in line with UL294 international standards 6. Used for office, factory staff quarters, public building and home. 7. Stable performance, resistance to metal shielding and interference ability, 8. Waterproof and rain-proof, Anti-freezing and heat protection.
We Greenland Fresco one of the leading exporter of Fresh Semi Husked or fully de-husked coconuts from India. We are internationally well recognized coconut exporter for our quality product & consistent supply. Once product harvesting is done, we store the nuts in cool & dry place and we process the process the products based on requirement & will supply. We provide quality inspection reports for our all coconut consignments. We are registered member of Indian Coconut Development Board. Health Benefits: 1. Coconuts are rich source of Fiber & low in cards, which helps to control blood sugar level in human body. 2. Coconut contains high level of good cholesterol which is beneficial for heart. 3. Coconut provides instant energy & promotes fat loss. Specifications: Product : Fresh Coconuts Type : Semi husked/Fully De-husked Each Nut weight : 400/500/600/700 gms Packaging Type : Red Mesh/PP Bag Net. Wt. per Bag : 6/12/12.5/13 KGS
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
The S2-EM is a compact, waterproof stand-alone programmable access control system. The product unique feature is simple in design, easy operation, and high reliability. Main Feature > Waterproof, conforms to IP66 > One relay, 2000 users, standalone > Card type: 125KHz EM card only > Working temperature: -40 oC ~ 60 oC (-40 oF ~ 140 oF) > Pulse mode, toggle mode > Built in LDR for anti tamper > Card block enrolment > Easy for programming by master cards and remote control > Easy for install, 6 wires only
White Thick RFID Proximity Clamshell Card. Versatile Use: School, College, Hospital, Corporate Office, Industry, Factory, Small Office, Government Dept., R&D Projects etc. High Graded Tested Cards for high quality of punching needs. All cards have a unique serial no. printed on every cards.
Brand Name None Model Number ACR-101 access control reader IC card reader ic card reader 13.56MHZ card reader door access control solution RFID card reader unlock door via card work with Access control board push button power supply electromagnetic lock CE yes waterproof IP68 Output Format Wiegand 26/34 RS485/232 warranty 2 years communication distance WG=100M RS485=1200M proximity card reader 13.56MHZ card reader without keypad
Latitude 3420 Laptop computer,Up to 11th Gen In-tel Celeron Coreâ?¢ i7 processors offer businesses the performance, manageability, built-in security features and stability of In-tel�® and align to a future-proof roadmap. Download and smoothly run graphic-intensive applications with optional N-VIDIA MX450. Multi-Ports Compatible with more monitors and accessories, with a full range of available ports, including USB 3.2 Gen2x2 Type-Câ?¢ port and legacy ports like HD-MI and RJ45. Model Latitude 3420 Processor In-tel Celeron 6305U, Processor speed Up to 1.80 GHz, 10th Generation In-tel Core i3-1005G1, Processor speed from 2.40 GHz to 3.40 GHz 11th Generation In-tel Core i3-1115G4, Processor speed from 3.0 GHz to 4.10 GHz In-tel Core i5-1135G7, Processor speed from 2.40 GHz to 4.20 GHz In-tel Core i5-1145G7, Processor speed from 2.60 GHz to 4.40 GHz In-tel Core i7-1165G7, Processor speed from 2.80 GHz to 4.70 GHz Memory â?? 4 GB, 1 x 4 GB, DDR4, 3200 MHz â?? 8 GB, 1 x 8 GB, DDR4, 3200 MHz â?? 8 GB, 2 x 4 GB, DDR4, 3200 MHz â?? 16 GB, 1 x 16 GB, DDR4, 3200 MHz â?? 16 GB, 2 x 8 GB, DDR4, 3200 MHz â?? 32 GB, 2 x 16 GB, DDR4, 3200 MHz Storage 1 TB SATA 2.5-in. 5400 rpm, hard drive 500 GB SATA 2.5-in. 7200 rpm, hard drive Up to 512 GB PCIe NVMe Gen3x4 M.2 2230 solid-state drive Up to 1 TB PCIe NVMe Gen3x4 M.2 2280 solid-state drive Number of cameras One External ports Network port/USB ports/Audio port/Video port/Media-card reader/Power adapter port/Security-cable slot/SIM-card slot
Special Features: Waterproof / Weatherproof Communication Interface: RFID Customized support: Customized logo Place of Origin: Guangdong, China Brand Name: ZF-CARD Frequency: 125KHz Material: PVC, PET, ABS, PET-F, PET-G Size: 85.5*54mm,thickness 0.86mm or customized Card Surface: Glossy/matte/frosted lamination Color printing: CMYK, 4C/4C full color, pantone, off-set/silk-screen and blank Main Market: Domestic Market, Central America, Africa, Eastern Europe Craft: barcode/magnetic stripe/UID/serial number/hot-stamping etc. Application: Market,Access Contral,Insurance,etc Production Standards: ISO 15693 Chip: Ti2048
product name Generic Contactless 125kHz TK4100 RFID card material PET/PETG/ABS/TESLIN size 85.5*54MM ANS CAN BE CUSTOMIZED chip TK4100/EM4200 /EM4305/EM4450 AND SO ON printing Silk Screen Printing/offset printing application Access Control System
Characteristics As a near-by card reader, it reads the inherent information from an entry card, and sends the data to entry control system. Function - ISO 14443A/Mifare type Card is supported. It functions as a recognition device by connecting to entry control system controller. Tamper Alarm Function - Alarm of the detachment and opening of a card reader (Alarm Sound is emitted.) - It is possible to send alarm data in using RS-485 communication way. Voice Guidance Service Function (Option) Specification - Communication with a Controller RS-485/Wiegand Output Metal Cabinet - Tamper Alarm HOST RS-485 1PORT, 9600/19200/38400 bps AUX. : RS-485 1PORT, 9600/19200/38400 bps
Material : PVC,ABS,PET, PC Size Stander size(credit card size): 85.5*54*0.86mm/0.93mm or customized Chip type : UHF , HF,LH MOQ : 500 or negotiable Printing : CMYK or panton colour,offset printing/silk printing finishing Glossy/matte/frosted/transparent Numbering : Embossed/engraved/flat/laser printing/jet dot number Craft : Signature panel, magnetic strip, barcode, embossed number, metallic printing. QR code printing Lead time : 7-8 working days ( It depends on exact quantity ) Payment : Western Union, T/T, Money Gram,Credit Card Delivery : By express /by sea /by air Application : Bank, School, Goverment, Enterprise, hospital,supermarkets , Cinema,Games,Gift,Hotel, home appliance, Leisure, Food and Beverage and other places
Material :high quality brand new pvc/ABS/PET/PC Size Stander size(credit card size):85.5*54*0.86mm or customized Card type:Hotel key card Printing :CMYK or panton colour,offset printing/silk printing finishing :Glossy/matte/frosted/transparent Numbering:Embossed/engraved/flat/laser printing/jet dot number Craft:Signature panel, magnetic strip, barcode, embossed number, metallic printing. QR code printing Lead time:7-8 working days ( It depends on exact quantity ) Payment :Western Union, T/T, Money Gram,Credit Card Delivery:By express /by sea /by air Application:Smart Lock / Access control / Animal ID and Waste Management , etc
Namemifaresmart card Frequency13.56mhz Standardiso14443a Chipmifare classicâ® , ultralightâ® , desfireâ® Memory1k byte etc Dimensioncr80 standard Read/ write cycles100000 Reading distance1-10cm (depend on the reader and antenna) Application for access control system, ticketing system, id card, event tickets, etc Available craftsthermal printing number, , magnetic stripe, barcode, golden/silver hot-stamping, signature panel, series number printing, uv printing, uid number printing, laser engrave qr code etc. Samplesfree samples are available for testing Package1. Standard export packing: 200pcs/white box, 5000pcs/ctn. 2. G.W./n.W.: 35kg/34kg 3. Size of carton: 48*23*30cm 4. Packing way can according to your request
Special Features: Waterproof / Weatherproof Communication Interface: RFID Customized support: Customized logo Place of Origin: Guangdong, China Brand Name: ZF-CARD Frequency: 125KHz Protocol: ISO 15693 Material: PVC, PET, ABS, PET-F, PET-G Size: 85.5*54mm,thickness 0.86mm or customized Card Surface: Glossy/matte/frosted lamination Color printing: CMYK, 4C/4C full color, pantone, off-set/silk-screen and blank Main Market: Domestic Market, Central America, Africa, Eastern Europe Craft: barcode/magnetic stripe/UID/serial number/hot-stamping etc. Application: Market,Access Contral,Insurance,etc Production Standards: ISO 15693 Chip: Ti2048
size : CR80 standard credit card size 85.4 x 54 x 0.86mm, can be customized manufacturer : MIFARE Plus chip, founded by Material : PVC, PET, ABS, PETG Data storage ti me : 5 years or 10 years at least Customized Printing : Plain white, offset printing or silkscreen printing Working Frequency : 13.56MHz Reading Distance : 0-10cm RF protocol : ISO 14443A Function : Read/Write protect by password Card Surface : Matte/ gloss finish Housing : Lamination Special artworks : Signature panel, magnetic strip, barcode, embossed number, Pearlessence printng, metallic printing. QR code printing UID code : UID code laser printing, or laser printing Applications :Public Transport :subway tickets, bus rfid ticket Access Control: payment membership card, time attendance, game ticketâ?¦ Logistics, hotel management, library and campus, Parking lot system and Consuming system, anti- label, warehous management, productioin lineâ?¦. Access Control , Cashless Vending, Loyalty & Discount Cards, Leisure card,Toll Card, Student/Campus Card/School Card, Identity Card, etc MIFARE and MIFARE Plus are registered trademarks of NXP B.V., and are used under license.
