Counter: LCD Display,0~999,999 Pitch of Left and Right Grinding Wheel: 63.5mm Load: 250,500,1000g (Adjustable) Rotating Speed: 60rpm Dimension: 55 x 38 x 47 (H) cm Weight: 30kg Distance between Grinding Wheel & Specimen Plat: 38mm 60X50X57 cm 50 kg
Print Abrasion Tester Print Abrasion Tester is applicable to testing ink layer of materials like labels, folding cartons, corrugated boxes, etc. Ink Rub Tester can do dry or wet rubbing test, discoloration test, paper fuzzy test, and special friction test. It can help users to analyze the reason of lower abrasion assistance, ink layer falling-off, lower printable of PS board, and adhesion of coating layers of other products. Specifications: Print Abrasion Tester Model HD-507 Operating Method Microcomputer Control Display LCD Specimen Size Minimum Size: 230¡Á50 mm Friction Speed 43 times/min ( 21,43,85, 106 times/min, adjustable) Friction Load 908g ( 2LB), 1810g (4 LB) Friction Stroke 60 mm Friction Area 50¡Á100 mm Frequence Setting 0~9999 times, auto-shutdown Outside Dimension (L¡ÁW¡ÁH) 330¡Á330¡Á410 mm Weight 35 Kg Power AC220V, 60W Design Criteria JIS-507-1, TAPPI-UM486, GB7706. Strong wooden case.
2. Rubber abrasion tester Rubber abrasion tester is widely used in rubber industry. It is mainly used to test the wear resistance of rubber. 2.1 DIN Abrasion Testing Machine, it is used to determine the wearability of rubber to identify the quality of rubber products. During the test, the rubber rubbed against the gauze on the roller under a certain load, and measure the wear loss. The equipment consists of machine base, roller, weight, reducer, motor, transverse block, cantilever, screw rod, etc. Rubber sample is clamped on the cantilever rotary spring, and the speed reducer drives the roller to rotate. Under the prescribed pressure, the gauze of the roller rubs against the sample to achieve the purpose of wear. The equipment has the advantages of small sample, time saving and no repeated friction.
1.Application It is mainly used to measure the wear-resisting property of concrete paving block. By the grinding between corundum and sample to calculate the loss in specimen volume. 2.Test method: En 14157 natural stones---determination of abrasion resistance method b:bohme abrasion test 3.Specifications 1diameter of abrasion disc750mm 2abrasive load2943n 3disc rotating speed301rpm 4disc hardness190hb220 5distance between center of sample and center of disc220mm 6test sample(71x71) 1.5mm 7control modedigital control and auto stop when set cycle time is reached 8voltage and powersingle phase, ac220v, 50hz
TABER 5750 Abrasion Tester Standards: ASTM D3884 ? ASTM D1175 ? ASTM D1044 ? ASTM D4060 ? TAPPI T476 ? ISO 9352 ? ISO 5470-1 ? JIS K7204 ? JIS A1453? JIS K6902 ? JIS L1096 ? JIS K6964 ? DIN 52347 ? DIN 53109 ? DIN 53754 ? DIN 53799 TABER 5750 Abrasion Tester with CE certificate, also CE safety signs TABER 5750 Abrasion Tester Applications: TABER 5750 abrasion tester make performance test of any size or shape of any sample for abrasion tests with a contoured surface and the polishing surface characteristics of the product, highly desirable (such as: computer mouse and other computer or IT products plastic paint wear tests, used for plastics, auto parts, rubber, leather and textile, electroplating, free removal of components, paint products, printing, design, and other products. TABER 5750 abrasion testing machine Features: Used to evaluate the wear resistance, scratch resistance (single or multiple scratches) and color transfer of (usually abrasion discoloration or abrasion fastness) and so on. Dry abrasion test, wet abrasion test can be carried out. Abrasion Tester includes a host 5750, three disc-shaped weights 250g, 10 CS-10 and H-18 5 grinding rubber, 50 S-14 sandpaper and wear depth measurement etc. Linear abrasion tester detailed parameters: 11 kinds of optional moving distance Moving away from standard 0.2 ", 0.5", 0.61 ", 0.75" 1.0 ", 1.5", 2.0 ", 2.5", 3.0 ", 3.5" and 4.0 " It can be customized special mobile distance." Adjustable back and forth moving speed of 2 to 75 / min. Wherein 2, 15, 25, 30, 40 and 60 back and forth / min six speeds, it has six preset buttons on the operation panel The number of revolutions: Can be set up to transfer 999,999 (Note grinding rubber during this time may need to be replaced) Alternatively load Standard load range is from 350g to 2100g (250g weight generally random configuration of three weights.) • Variety of optional weight Abrasion Tester has five selectable moving distances: Moving away from standard 0.5 ", 1", 2 "3" and 4 " It can be customized special mobile distance Adjustable back and forth moving speed of 2 to 75 / min. Wherein 2, 15, 25, 30, 40 and 60 back and forth / min six speeds, it has six preset buttons on the operation panel TABER 5750 wear testing machine main features: Simulate real conditions of use: You can set the moving distance, speed, rpm, load and other parameters Choose a variety of different media and wear parts. (Optional sample fixing table and other optional accessories, with the scratch, the extent of damage was measured and resistances to alcohol testing, measuring coin scratch resistance and the like.) Ensure the stability and accuracy of the test: Grinding its general size and shape as the end of a pencil eraser head are made of high quality wear materials. Ensure the stability for test. Laser guided placement test samples to ensure the accuracy of the test. more view on http://www.abrasiontesters.com/taber-5750-abrasion-tester.html
Introduction: This machine is used to test the abrasion, scrub and washability performance for many kinds of materials, do the abrasion scrub test in wet and dry condition; touch screen control. It is widely used in water-based coating field. Application: Paint, coating, leather, wood, plastic, printing materials and fiber etc. Big LCD design, touch-screen operation Operating Menu: Chinese or English Testing fluid flow is controlled by peristaltic pump Technical Specification: Scrub rate: 37±1 cycles/min Maximum setting of abrasion times: 9999 Sample thickness: 0-25 mm Test panel thickness range:0-25 mm (Adjustable) Standards: ASTM D2486, D3450 DIN 53778 Order Information: BEVS 2805 Wet Abrasion Scrub Tester
Red Garnet/ Garnet Abrasives have uses such as sand blasting media, water jet cutting, hole drilling & lapping, and making coated or bonded abrasive tools. We provide Garnet Mesh: 10/20, 20/40, 30/60, 40/60, 60/90, 90/120, 120/180, 180/240, 20/25, 25/30, 30/35, 35/40, 40/45, 45/50, 50/60, 60/70, and 70/80.
Advance 1). We are 100% manufacturer 2). With Good workshop environment(under constant temperature all the year round) to ensure stable quality; 3). With Advanced tunnel kiln baking equipment, Continous production, short cycle, high quality: 4). High stability and high temperature resistance; 5). Reduce material loss, low noise and low dust; 6). High efficiency, good cutting sharpness, high durability, with long uselife; 7). Fast comprehensive after-sales service. Packing 1). Shrink package first, 2). Inner brown box/colour box or plastic box/ metal box for 4"~5" discs; 3). Stardand export brown carton or color box. 4).Shipping by sea from china-mainland port
Silicon carbide si made from hte mixture of pure silica sand and green petroleum coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh Fe203 Al203 Free carbon 3,5%MAX Moisture Size(mm) Ha-SIC-01 90% min. 1.5% max. 15.% max. 35.% max. 0.5% max. 1-5/1-10 HQ-SIC-02 90% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-10 HQ-SIC-03 88% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-1/1-10 HQ-SIC-04 98% min. 0.6% max. 0.6% max. 0.2% max. 0.5% max. 0-1/1-3 HQ-SIC-05 70% min. 2% max. 1% max. 10% max. 0.5% max. 1-10
Product Brands: ABC, ABC Alkaline. Available Variants: AAA, AA, C, D, 9V Product of Indonesia
Attapulgite, barite (grey & white),bentonite,(sodium & calcium) dolomite, feldspar, kaolin, quartz lumps, quartz grits, quartz powder, ramming mass, abrasive sand, fly ash, silica fumes(white & grey) ggfs,ggbs, phosphogypsum, gypsum powder & lumps, precipitated calcium carbonate(pcc, gcc), precipitated silica,natural & quartz silica sand for sports grounds and infill for synthetic turf, beach volleyball court, artificial beach, grow beds of aquaponics, bunker sand etc...
Abrasives Md-80 dispersible Ml-200 Mx-98 alumina (2)
Abrasives
Abrasives
Abrasive As one of the biggiest manufacturers and exporters in china, our annual production capacity is 50, 000, 000pcs of backing pads which are mainly used for manufacture of flap discs. 90% of our products are for international markets and most of the them are sold to europe, usa, japan and israel As one of the biggiest manufacturers and exporters in china, our annual production capacity is 50, 000, 000pcs of backing pads which are mainly used for manufacture of flap discs. 90% of our products are for international markets and most of the them are sold to europe, usa, japan and israel
Abrasives Material: brown fused alumina, 110g/sqm blue latex paper for car sanding and painting and furniture and wood. 2.Material: silicon carbide, 110g/sqm brown latex paper for car sanding and metal and marble and stone 100pcs per bale and 10bales per carton
Abrasives 100 lbs
Abrasives Brown fused alumina:green silicon carbide Packing size : 25kg/bag
Description Industrial Raw Materials are used for buffing, sanding, grinding, or polishing with other products such as Silica Flour, Limestone, Aggregate, Quicklime, Talc, Volcanic Rock and Calcium Carbonate. An abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. As long as the abrasive itself is harder than the material you are trying to finish, an abrasive will be a very effective way of honing down any material to prepare it for use. Industrial Raw Materials Abrasives consist of minerals that can be either naturally-occurring or synthetic, such as calcite, emery, pumice, sandstone, garnet, borazon, ceramic, steel abrasive, and silicon carbide. When used for industrial applications such as mining, construction, railroad, and wholesale/retail operations, usage falls into several different categories: bonded, coated and others. A grinding wheel is a good example of a bonded abrasive, operated at very high speed to finish any material which is pressed against it. Sandpaper is the most commonly used coated abrasive, and is affixed to a backing material, such as paper or metal. While sandblasting a stream of Industrial Raw Materials Abrasives is thrown out on the surface of the workpiece to make it smooth or to remove the contaminants from the surface. Apart from this, these are used in automotive paints. Calcium carbonate is also an Abrasive that is used in toothpaste. In this particular application, hardness of the Abrasive is more than that of the contaminating agent but less than that of the tooth enamel. This helps in removing the bacterial plague without damaging the tooth enamel. Abrasives are also used in the processing of jewelry pieces.
Abrasive 1 ton per woven bay or 25kg per paper bag
