32Mm⸠Sieve Cleaning Rubber Balls Suppliers and Manufacturers

"Spice-In is a Vegan, Gluten-Free, Plant-based and Non-GMO starch based seasoning. Spice- In is a Functional food ingredient blended with perfect spices and condiments to enhance the flavour of the product. Spice-In is 100% vegetarian and naturally made product which does not have any preservatives and Mono sodium Glutamate (MSG)."

Senna Leaves [Cassia Angustifolia] in teacut size of 3 to 5 mm or as required

Product Brief Introduction: with the largest consumption for construction and building materials. It is mainly used as enamel fluxing agent, glass opalizing agent, acid-proof clay, acid-proof concrete coagulator and wood preservative. It can also be used for insecticide. Product Hazard or Harmful Ingredients:It does not combust or explode but has corrosivity and certain toxicity. Product Physical Properties:The product is white powder crystals and basically neutral. It is difficult to dissolve in water and acid and the density is 2.37g/cm3. Product Chemical Properties:It is stable under normal temperature. It does not combust nor explode when it is heated or contacts with redox materials. Spillage Treatment Method:Simple cleaning and burying Protection Measures for Product Transport & Storage:To prevent from caking and going bad, it should be kept indoor or be covered with protection materials like canvas and free from the blazing sun. Packing :Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg/1200kg. Other Information: Anti-caking agent can be added at the request of customers. Technical Specifications Analysis items Standard Na2SiF6 99% min Loss of weight on drying at 105â?? 0.3% max Free acid (as HCl) 0.1% max Chloride (as Cl) 0.1% max Sulphate (SO4) 0.3% max Iron(Fe) 0.02% max Water-insoluble matter 0.5% max Particle size distribution Passing through 40 mesh sieve 98% min Passing through 60 mesh sieve 90% min Passing through 325 mesh sieve 25% max

Description 100% clean cocopeats used for vegetable nursery as well as for leaves-consumed green vegetables. Cocopeats are final raw materials of coconut husks in our production line after sieving to take out long fibers or short fibers. Specification Fiber length: Less than 2cm Impurities/Sand: 3% Max Weight: 5kg (+/- 3%) Moisture: 15-20% or 25 - 40% E.C: Low EC (For Plant Growth) < 0.5-0.8 ms/cm PH: 5.5 to 6.8

Description: Bamboo mats are products made from natural bamboo, harvested and dried into smooth balls, then firmly connected with super-flexible fibers. It is an item used by many Vietnamese families. Because bamboo mat is different from other mats because it brings more cool and comfortable on hot summer days. Especially the areas with hot days as much as in the tropical countries -Origin: Vietnam -Material: 100% bamboo/rattan -Color: natural, yellow, brown -Size : (W-L): 1.6-1.8/ 1.8-2.0/ as customer's request -Usage: cover in bed -Style: cube bamboo mat, seed bamboo mat, fiber bamboo mat -Maintenance: avoiding direct sunlight and high moisture. Cleaning clear towel frequently

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

APPLICATION OF SK-HB K-SILICATE MORTAR : * K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors. It is also used for jointing chemical resisting stoneware pipes. K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles. The concrete surface needed protection should be dryed, clean and rough. The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner. When Bedding and Jointing Materials are the same. On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints. The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water. Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic. When Bedding and Jointing Materials are Different. Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions. PREPARATIONS OF MORTAR : * Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan. * Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar. * In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared. * The cement mortar will be used before it starts setting.

Rubber Compound: Styrene Butadiene Rubber Vulcanized SBR Styrene-butadiene rubber (SBR) Its vulcanized trimmings from production scrap from rubber we have ongoing this type of scrap. Product Description: trimmings from production scrap from rubber we have ongoing this type of scrap any question do not hesitate to contact us Styrene-butadiene rubber (SBR) is one of the most versatile copolymer rubber compounds. It consists of the organic compound styrene and the chemical budatiene, with the amount of budatiene usually being about three times more than the amount of styrene. SBR is a stable synthetic that is resistant to abrasion. It is used in a wide variety of products, such as automobile tires, children’s toys, and shoe soles Its vulcanized Additional Information: Packaging : Bales Color : Mix Color Contamination : Production Scrap Very Clean Weight per container : 25 + Payment Conditions 2 : 30% advanced payment rest direct after draft BL Availability : ongoing Availability /Month : ongoing

The Chair Completely Used Of Natural Rubber Wood, Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.

The Chair Completely Used Of Natural Rubber Wood Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.

The Chair Completely Used Of Natural Rubber Wood Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.

Size: 430*470*900 The Chair Completely Used Of Natural Rubber Wood, Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.

Size: 430*470*900 The Chair Completely Used Of Natural Rubber Wood, Qualifically Dried By Modern Technology To Anti-most Anti-correcting, Warranties By Time. Chair Covered With Pu Glossy Paint (natural) Avoid Waterproof, Easy To Clean, Safe For Users.