Multi-sourced SFP package with dual LC/PC receptacles; Single mode dual fibers transmission Up to 20Km with 9/125μm SMF; AC coupled for Rx and Tx side Two temperature ranges: 0°C to +70°C for commercial level, -40°C to +85°C for industrial level; operates at data rate 155Mbps; Complies with MIL-STD-883/GR-468 Complies with lots of brands of switch such as cisco h3câ?¦â?¦. Can be with or without DDM
SUNTelecoms SFP Transceiver supports dual data-rate of 1.25Gbps/1.0625Gbps and transmission distance of 80km with SMF (Single-mode Fiber). The SFP Transceiver consist of two sections: The transmitter section incorporates a FP laser, while the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). Features: Hot-pluggable Compact size, enabling high port density in each hosting device. High-performance and cost-effective SFP package with LC connector 1310nm FP laser and PIN photo detector 80Km transmission with Single-mode fiber +3.3V single power supply and TTL logic interface LVPECL compatible data input/output interface Low EMI and excellent ESD protection Eye safety, laser Class I safety standard, IEC-60825 compliant Compatible with RoHS
New sfp 155m bidi 80km optical transceiver cisco huawei compatibility Specification Data rate: 155m Wavelength: tx1490/rx1550nm Distance: 80km Interface: lc Ddm: yes Place of origin: made in china Port:shenzhen Working temperature: commercial: 0â°c to +70â°c;industrial:-40â°c to +85â°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Scope of application: switch, ethernet, data center, sdh, sonet, atm Package type: individual package or 10pcs/package
155m 1310nm sm 20km lc sfp transceiver Specification: Data rate:155m Wavelength:1310nm Distance:20km Interface:lc Fiber:sm Ddm:yes Place of origin:made in china Port:shenzhen Working temperature: commercial:0°c to +70°c;industrial:-40°c to +85°c Optical module used in ethernet, sdh, sonet, can be compatible with cisco 2900 series, cisco 4000 series, cisco 5000 series, huawei, the pole into, d-link, zte, hp, juniper and other equipment. Our products require strict testing standards, standard packing form, to provide customers with quality service and timely delivery cycle. Function:photoelectric conversion module Scope of application: switch, ethernet, data center, sdh, sonet, atm
Compliant with IEEE802.3by (25 Ethernet) Backward compatible EMI shielding Data rates : up to 25 Gbps Data rates : up to 25 Gbps Operating for High Temperature as 0â??~ 70â?? Low power consumption EMI shielding Higher Length for customized option
Providing solutions for edge computing, high-speed transmission and cloud storage. 1. SFP/SFP+/SFP28 DAC/AOC CABLE 2. QSFP+/QSFP28 DAC/AOC CABLE 3. QSFP DD Cable DAC 4. RJ45 CABLE 5. External MINI SAS HD 6. Mini SAS HD 7. Oculink 4X Cable 8. SlimLine 4X & 8X CABLE 9. U2 PCIe SSD Cable 10. SATA CABLE
Fiber media converter.
NETON SFP Transceiver Module Transmitter center wavelength: 1310nm, 1550nm; Data rate: 155Mbps to 2.5Gbps; QC inspection: ISO, CE, CB, UL, ROHS, FDA, etc; Power supply: single 3.3V; Distance: SR, IR1, IR2, LR1, LR2; Operating temperature: 0C to +70C or -40C to 85C. NETON optic products, SFP+ Transceiver Module, SFP Transceiver Module, CWDM Transceiver Module, GBIC Transceiver Module, GPON Transceiver Module, 1x9 Transceiver Module, 2x5 Transceiver Module, SFF Transceiver Module and so on, with the international authorized certificates ISO, CE, CB, UL, ROHS, FDA, etc, have been sold to more than 20 countries and regions and been widely used for Ethernet, Fiber Channel, ATM, SONET/SPH, Switches, Routers, Hubs, Digital Video Transmission and other optic networking applications. Features of NETON SFP Transceiver Module: 1. Dual fiber SFP transceiver; 2. Transmitter center wavelength: 1310nm, 1550nm; 3. Data rate from 155Mbps to 2.5Gbps; 4. Single 3.3V power supply; 5. Distance SR, IR1, IR2, LR1, LR2; 6. Monitoring interface compatible with SFF-8472; 7. Operating temperature 0C to +70C or -40C to 85C Applications of NETON SFP Transceiver Module: 1. Fast Ethernet; 2. Fiber Channel; 3. ATM; 4. SONET OC-3/SDH STM-1 5. Other optic links. 10PCS Plastic Box, 10 Boxes Per CTN.
Description The SFP transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 10km to 20km transmission distance with SMF. The transceiver consists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All modules satisfy class I laser safety requirements. The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver. The standard serial ID information compatible with SFP MSA describes the transceiver¡¯s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA). The SFP transceivers are compatible with RoHS. 3x4x8 cm.
Sfps & gbics: 1000base-sx mini-gbic optic, mmf, lc connector, 550m compatible with cisco glc-sx-mm, 3com 3csfp91, hp j4858a, extreme 10051, nortel aa1419013 , avaya 4705-150 completely 10 units per package
Sfp Our products compatible with all kinds of mainstream switch system.Such as cisco, 3com, hp completely. One module in one paper box 10*8*4cm 0.1kg/box
Fiber Optic Patch Cable, Adapters, Epon, EOC, Poe Switch, Ethernet Switch, SFP.
Fiber Media Converter Fiber Patch cord Optical Transceiver(SFP.GBIC.BIDI SFP , CWDM) Fiber Adapter Fiber Attenuator Fiber video converter/PDH converter
Hot-pluggable SFP Duplex LC connector Support 500M to 120KM trasmission distance Support for digital diagnostic Metal shell shield electromagnetic interference Follow the SFP MSA agreement Comply with SDH/SONET transmission standard Comply with IEEE 802.3 Ethernet standard Operating Temp. Range 0& 3.3V single supply Comply with RoHS-6 standard.
1.25G GLC-LH-SM Optical Transceiver. Dualfiber Singlmode 1310nm 10KM Features Dual data-rate of 1.25Gbps operation 1310nm FP laser and PIN photodetector for 10KM transmission Compliant with SFP MSA and SFP-LH-SM with duplex LC receptacle Digital Diagnostic Monitoring: Internal Calibration or External Calibration Compatible with RoHS +3.3V single power supply Operating case temperature: Standard : 0 to +70ípC Industrial : -40 to +85ípC Applications Gigabit Ethernet Fiber Channel Switch to Switch interface Switched backplane applications Outer/server interface Other optical transmission systems Standard export package
With the adequate production capacity and total quality management, a wide variety of sfp transceivers are available with different rates(155m, 1.25g, 2.125g, 2.5g and 4.25g) and transmission distance(from 550m to 120km). Details about one modle of atop's sfp transceiver here. Ap-s31121-3cl20 1.25 gb/s rohs compliant long-wavelength Pluggable sfp transceiver Product features Upto 1.25gb/s duplex data links Hot-pluggable sfp footprint 1310nm fabry-perot laser transmitter Duplex lc connector Rohs compliant and lead free Upto 20 km on 9/125 Metal enclosure for lower emi Single 3.3v power supply Low power dissipation
With the adequate production capacity and total quality management,a wide variety of CWDM SFP transceivers and CWDM xfp transceivers are available with different rates (1.25G and 2.5G ) and transmission distance(from 40km to 120km). Details about one modle of ATOP's CWDM SFP transceiver here. AP-SC49125-3CxL80 1.25 Gb/s RoHS Compliant CWDM Pluggable SFP Transceiver Product features Up to 1.25Gb/s bi-directional data links Hot-pluggable SFP footprint Uncooled DFB laser transmitter in 8 possible CWDM wavelengths Duplex LC connector RoHS compliant and Lead Free Up to 80 km on 9/125 Metal enclosure for lower EMI Single 3.3V power supply Low power dissipation
Tx-1310/rx-1490 nm single-mode bi-directional Sfp simplex connector 155 mbps sonet oc-3/sdh stm-1/125 mbps fast ethernet Features: Compliant with sonet/sdh standard Compliant with fast ethernet standard Industry standard small form pluggable (sfp) Package: Simplex lc connector Differential lvpecl inputs and outputs Single power supply 3.3v Ttl signal detect indicator Hot pluggable Class 1 laser product complies with en 60825-1
CWDM-SFP
1) Package:SFP+; 2) Data Rate:10Gbps; 3) Distance:300m; 4) Wavelength:850nm; 5) Connector:Duplex LC; 6) Fiber Type:Multi-mode fiber(MMF); 7) Power Supply:3.3 single power supply; 8) Operating temperature:0 to 70; 9) DDM: With Digital Diagnostic Monitor; 10) Others:Compliant with 10GBASE-SR standards,SFP+ MSA specification and IEEE 802.3AE. 11) Application:10GBASE-SR/SW,10G Ethernet.