High Quality Professional Horizontal Wood Log Splitter for Sale The machine is designed to cut the big stump, big branches, large logs and hard wood to small size which can be fit for making wood chippers or for other use. This machine is used for the factory of the plant-making,paper production and wood chips manufactures.it is the ideal product for the production of wood chips equimment and the latest series of products wood splitting machine. Product performence :reasonable struture ,strong and durable ,high output, easy operation ,safety features ,it is the ideal product to replace the band saw. maximum process diameter(mm):1500 capacity(t/h):4-6 power(kw):15 weight (t):2.2 size(mm):4000*55*1700 spindle speed(rpm):1450
V8 Vacuum Table (1)Brief introduction Vacuum table V8, which can replace the traditional fixture, is to fix the flat workpieces, such as board, glass, marble, and other panel flat workpieces on the work table. Characteristics: great strength, prompt and convenient operation,durable using and not to hurt the workpieces. It creates more cross-cutting vertical and horizontal grooves forming a work surface with many squares or rectangles. It can be compatible with workpieces of different sizes. The warranty period is half a year. (2)Technical data: Gross weight7kg Packing size385385320mm Pressure3�6kg/cm2
Edge Trimmer Machine SETM-I (1)Introduction: This machine is the auxiliary tool of the manual edge bander. Can effectively solve the cutting and trimming demands for the edge band, which is the excess of the straight plates and duckbill plates. Its operation is simple and effective. (2)Technical Data: Trimmer speed24000rpm Net weight 15kg Motor power350w Gross weight17kg Packing Dimensions870735180mm
This is a double-sided gluing portable edge banding machine. Our portable edge banding machine can equably wipe hot melt glue on the banding tape. The mature design makes this machine easily operate on straight and curve edge of any wooden furniture, with any quality of bendable tapes such as ABS, Melamine, Veneer, PVC and so on. Model: EB-III Voltage: 220V/110V,50HZ Panel thickness: 10-55mm Edge thickness: 0.3-3.0mm Feeding speed: 0-5m/min Min.D.of Arc: 25mm Working temperature: 120-180 Power: 680W
Honeycomb panel complete sets of equipment by the hot press, cold press, transmission components, such as units. Characteristics: hot plate: hot plate by the high-quality carbon structural steel made by the fine abrasive surface processing, flatness of less than 0.06mm; finish 1.6; high accuracy, high strength, durable; Heating system: with a well-designed sub-design, low power consumption, thermal uniformity, temperature adjustable; insulation uniform temperature within 3t. Hydraulic system: the main import items using the original hydraulic pressure adjustable; Tanks: made by precision cnc machining, the use of imported oil seals, non-permeability phenomenon. Automatic control, a mere touch of one button, can achieve increased platen, closed, pressure, pressure, time, the entire procedure, such as plate drop. Uses: major pressure plate affixed to aluminum honeycomb and paper honeycomb board. Applicable to two types of glue and film technology, with its combination of hot or cold-pressing pressure plate affixed to the cellular effects of their good adhesion formation. Not the characteristics of deformation. Is affixed to a new generation of the ideal pressure the best choice for eco-friendly materials. Container
On the basis of digesting and absorbing world advanced technology and know-how, qingdao guosen machinery., ltd. Has successfully developed many different kinds of hpl hot press group in accordandance with different market requirements, Hpl series hot press group mainly consists of hot press, loading/unloading system, caul returning system, vacuum hoist system, hydraulic system, and electric control system. Hot platen, maximum unit pressure can be 120kg/cm2 , is equipped with heating and cooling system to realize mat hot pressing and cold pressing on same hot press and meet manufacturing technics requirement of finished board with high quality. There can be three selections according to different heating and cooling system of main machine:1.Steam heating/cooling system 2.Over-heated water heating/cooling system 3. Thermal oil heating/cooling system.
Cold press,Hot press to make industrial cardboard
SC3B4 3-WHEEL SELF-WALKING WOOD CRUSHER SPECIFICATION - Coarse grain Take off the chipping spurting tube ( the chopper height is about 130cm) can movie under the low shelf. The radius of gyration is able to walk on the bad terrain, suitable shuttles back and forth in orchard. Available for 21HP and 23HP, max. chopping diameter 12cm -15cm. Engine Type Diesel Engine Max.Power(hp/rpm) 21HP or 23HP Braking system Manual brake Moving speed(km/hr) Approx. 2.5(1)?4.9(2)?7.9(3)?2.4(R-shift) Over-feeding device When the feeding volume is too much, it will stop and remove the excess object automatically. When the feeding volume becomes normal, it will begin the feeding action. Thus, there is no need to stop the engine. Discharging way Upward type or downward type Max. crushing diameter Diameter 12cm (21HP), 15cm (23HP), wet soft wood Operation capability (approx.) Evaluated on straight trunk : 1000 Kg/hr (21HP), 1200kg/hr(23HP) Note Specification is based on actual machine. Our company reserves the right to modify the specification
Product name: laser cut engrave machine jp1490 Working area: 1400*900mm Table: blade table / honeycomb table Laser power: 80w/100w/130w/150w Laser tube type: co2 glass laser tube Driving system: stepper motor Machine control: dsp control Usb interface Water chiller
Specification Model YLX-9S-1 YLX-9S-2 YLX-9S-3 Material specification Main power(kw) 55 75 90 1.Material length ¡¨¹6mm 2.Moistur,15% 3.Density:1-1.6g/cm3 Pellet::|6mm,8mm,or 10mm customd Accessory power(kw) 6.7 6.7 6.7 Capacity(t/h) 0.8-1 1-1.2 1.2-1.5 Weight(t) 3 3.5 4 Dimension(m) 2.2*1.2*2.5 2.4*1.2*2.5 2.6*1.3*2.5 as per the model
1.Wood pellet mill is a kind of biofuel moulding machinery used for fireplace,heating system,hotel,restaurant,bath center,boiler,biomass power plant etc. 2.Raw materials to be made pellets:sawdust,grass,corn straw,wheat straw,rice husk,peanut shell,sunflower husk,alfalfa,oak,tree branches,tree barks,corn,cob,bamboo powder,cotton straw,palm fiber,EFB and so on. 3.With high precision cylindrical in-volute helical gear drive directly, transmission efficiency is as high as 98% 4.With high quality refining steel,the main body of the machine has the features of uniform thickness and compact structure. 5.The bearing and oil seal are imported from Japan and USA,the bearing is high precision bearing and the oil seal could bear high temperature and durable 6..In particular the lubricating oil return system could add oil timely and automatically. 7.The mould is two layer mould,and it could be designed two kinds of size of the mould hole.With high strength alloy steel,the mould has the features of long service life. 8.Final pellets size could be adjusted by customer requirements.The density of the pellets could be 0.9-1.4cm3.The calories could be from 3500-5500 Kilo-calories. AS PER THE MODEL
Features of ring die biomass wood pellet machine: 1. Triangle with double motor drive system, smooth rotation, low noise and without lubrication. 2. Compared with gear machine, the spindle bearing is more durable, no oil leakage phenomenon. 3. The starting current is half gear machine as double motors, and little influence on power grid. 4. The support bar and main shaft forging together, good rigidity, whatever old or new machine, roller always stay parallel to the ring die, so the production efficiency is like new. 5. Installation form of ring die have two kinds. One is normal cone type ,the other is hoop type. 6. Can be used for pellet from wood ,tree braches, wood chips ,wood sawdust and any other biomass materials. such as eucalyptus, cork,oaks, fruit trees, vines, cedar trees, gorse, straws and grasses. 2, Requirements for raw materials: Size:1-2mm(All the raw materials must be crushed into sawdust before going to wood pellet machine.If not, you may need a wood chipper, wood crusher.) Moisture: Generally, 10-15% is best for producing good quality wood pellet. If too high, or too low, you need to dry or moisture them first. Technical parameter Model Power(KW) Capacity(T) Weight(T) Size(mm) TYJ450-II 55 0.8-1.5 2 1350*850*1500 TYJ550-II 110 1.5-2 4 1850*1050*1800 TYJ680-II 160 2-2.5 6 2150*1180*1950 TYJ860-II 220 2.5-3 8 2430*1380*2100 TYJ980-II 315 3-4 12 2800*1500*2500 1).vertical feeding directly 2) .die static, roller rotating, materials centrifugal, Evenly distributed around. 3). double-layer dies, up and down dual-use. 4). A.Automatic lubrication for rollers (To insure the pellet mill can run 20 hours without resting) B. Automatic lubrication for spindles. The self-lubricate system is applied in two parts of vertical biomass wood pellet machine, the main shaft,and the rollers. This can keep machine in full maintenance for 24 hours. Lubricating main shaft not only helps to increase lubricity of oil, high temperature viscosity, and the capacity of oxidation resistance and extreme pressure protection, but also greatly decreases abrasion of mold caused by cold start, increases low-temperature flowability, so that when the system get started in a brief moment, the oil can reach to the lubrication-needed place to low the abrasion of mold to minimum. Are you confusing as below? Q: This is my first time to import, how can I trust your company and ensure to get the goods if I order from you? size:1850*1050*1800 weight:4T the conventional packing of wood pellet machine is wooden case
Technical specifications Overall dimensions mounted: lg 8.1 mx 2, 7 mxh 2m Built entirely of galvanized steel chroming. Vertical stroke 1170 mm Longitudinal slide stroke 7000 mm Cross slide stroke 1300 mm Total weight 650 kg (depending on engine) All movements are ball bearing. The blade shaft is mounted on two conical roller bearings. Trolley wheels are easily replaceable steel 380 v three-phase electric motor Petrol engine briggs & stratton Safety blade front and rear Simultaneous vertical displacement of the assembly by a single crank Accident all items can be replaced or repaired, beams, frames, truck, etc .... Sawing capacity Logs: maximum diameter of 1.4 m to 2 m and 6 m length maximum Timber: 25 cm x 25 cm (26 cm x 26 cm optional) Quarter sawn: 24 or 26 cm wide Volume of daily flow: from 6 to 12 cubic meters of wood sciépendant as sawing continues on the other station. It allows to increase the daily capacity by eliminating the time-sawing between two logs.) A portable sawmill ecopro2® includes: A sawmill with capacity 25 cm x 25 cm x 6 m A tilting system (this equipment allows to remove the waste and to position a new log without risk of collision logs / lumber mill in the open position while sawing continues on the other station. It increases daily capacity eliminating the time-sawing between two logs.) A sharpener (sharpener helps sharpen the saw teeth without removing the blade.) (+ link to the video) A toolbox A blade diameter 630 mm
Light duty lathe machines are generally lathe machines of small size with a swing of 10 inches or less, mounted to a bench or table top. The light duty lathe machines are made of quality tested material and is used in electronic, electrical and automobile industries. The light duty lathe machines can be used in almost all machining jobs but may be limited due to the size of the material that can be turned.
Anti burnback feeding system: pellets feeding system adopt double stage screw feed. The first stage is for controlling the pellet feeding quantity to make sure enough pellet fuel. The second stage makes sure there is no excess pellet in the feed screw. So it is blank between the first stage and the second stage. There is no back-fire happen and make sure the safety operation. Through reducing the load of feeding system, the wood pellet boilers feeding device will have fewer fault. Intelligent control: we adopt microcomputer one-button operation, automatic feed automatic ignition, with the setting temperature, start and stop cycle, and fault alarm function, simple and easy operation. Advanced combustion system: adopt patent inside wood pellet burner, adopt special three side air supply system, which makes sure the pellet full combustion. Equipped heat recovery device makes the boiler efficiency can reach 92%. Safety operation: anti-back fire feeding system, temperature sensor, low water level protection device, over-temperature protection device. Easy to maintain: wood pellet hot water boilers belong to atmosphere hot water boilers. There is no need for professional stoker. It is automatic wood pellets feeding and automatic ignition. User just needs to add 1-2 times fuel per day. Ash cleaning is very easy, user just needs to take out of the ash bucket at the bottom of the chamber. Cost saving: wood pellet hot water boilers operation cost is just 1/3 of diesel oil hot water boilers and 1/5 electric heating hot water boilers. Http://www.Romiter.Com Http://www.Ceboiler.Com Http://www.Steam-generator.Com
G the past ten years, our company is developing quickly and stably at the annual growth speed of 100%. We sincerely welcome all customers to contact and visit us to build long-term business relationship. Service 1.Our own qc staffs to check the quality strictly before delivering for our clients. 2.Detailed introductions make you understood, and make you to operate all the machines easily 3.If need professional engineer will go to your plant to set the machine for you until it operates very well 4.If there was something wrong with the machines, we promise it will be solved within 24 hours Now we are purchasing agent of many customers all over the world. Purchase almost everything for them. We have lots of experiences of purchasing. Low cost and good quality is our target Plywood
Technical Data K5-320 K5-400 Planer Max. Planer Width mm 320 400 Work Table Length mm 1560 1920 Max. Planing Thickness mm 4 4 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Cutter Shaft Dia. mm 86 86 El. Motor Power kW 2.2 3 Thicknesser Max. Planer Width mm 320 400 Work Table Length mm 550 690 Max. Planing Thickness mm 180 220 Max. Planing Heigh mm 3 3 Cutter Shaft Speed R/min 5200 5200 Number Of Cutters 3 3 Feeds m/min 8 8 El. Motor Power kW 2.2 3 Boring Device Table Dimensions mm 400/250 (500) 400/250 (500) Longitudinal Travel mm 100 (150) 100 (150) Cross Travel mm 100 (150) 100 (150) Vertical Travel mm 100 (150) 100 (150) Max. Drill Dia. mm 16 16 Drill Speed R/min 5200 5200 Spindel Moulder Spindle Diameter mm 30 (50) 30 (50) Spindle Speed R/min. 6000 6000 Vertical Stroke of Spindle mm 130 130 Max.Ttool Diameter mm 170 170 Dimensions Of Worktable mm 850 / 450 850 / 450 El. Motor Power kW 2.2 2.2 Circular Saw Saw Blade Diameter mm 300 300 Saw Blade Speed R/min. 3700 3700 Max. Depth Of Cut mm 85 85 Dimensions Of Worktable mm 850 / 450 850 / 450 Spindle Dia. mm 30 30 El. Motor Power kW 2.2 2.2 or 3 Tenoning carriage Dimensions of worktable mm 450/750 450/750 Machine dimensions Net weight of the machine Kg 540 580 Length mm 1600 2000 Width mm 1140 1700 Height mm 1000 1100
Circular saws Cutters Cutter heads Shank cutters And many others by customer’s request.
Technical characteristics FU 251M FU 301 FU 321M FU 361 FU 401 Table size mm 250x1120 300x1250 320x1350 360x1500 400x1600 “T” slots – number x size mm 3x14 5x14 5x18 5x18 5x18 Table swivel – left and right (º) 45 45 45 45 45 Longitudinal table travel - manual mm 820 950 1000 (1250)* 1150 (1250)* 1250 - automatic mm 800 930 980 (1230)* 1130 (1230)* 1230 Cross table travel - manual mm 280 320 360 360 360 - automatic mm 260 300 340 340 340 Vertical table travel - manual mm 410 410 460 460 460 - automatic mm 390 390 440 440 440 Max. Distance from table top to spindle axis mm 440 440 490 490 490 Spindle nose taper ISO 40 40 50 50 50 Number of spindle speeds 18 18 18 18 18 Spindle speed range rpm 40-2000 (50-2500)* 40-2000 (50-2500)* 32-1600 (40-2000)* 32-1600 (40-2000)* 32-1600 (40-2000)* Number of table feeds 18 18 18 18 18 Table feed rate - x,y mm/min 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** 12.5-630 (16-800)* (20-1000)** - z mm/min 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** 5-262 (7-334)* (8-415)** Table rapide traverse mm/min 2500/1040 2500/1040 2500/1040 2500/1040 2500/1040 Main motor power kW 4 5.5 7.5 7.5 7.5 Feed motor power kW 1.5 1.5 2.2 2.2 2.2 Machine weight kg 1975 2025 2850 2900 2925 * - option Note: All the milling machines could be manufactured with control of the movement of the axes by joystick, and frequency adjustment of the feeds
The feed pellets have smooth surface, suitable density and higher curing degree. The machine can make starch pasting, protein coagulating or denaturizing, and improve the nutritional quality of feed pellets, easy to digest and absorb, meanwhile kill the pathogenic germ and parasite. Technical parameters Model,Power(kw),Diameter(mm),Capacity(kg/h),Temple diameter(mm),Dimension ,Weight(kg) Yskj120,2.2-3,¦µ2.5-¦µ6,80-100,120,600*450*900,50 Yskj150,4,¦µ2.5-¦µ6,100-300,150,750*350*850,110 Yskj200,5.5-7.5,¦µ2.5-¦µ8,300-500,200,1150*530*750,150 Yskj250,11-15,¦µ2.5-¦µ8,400-700,250,1250*600*850,200 International standard seaworthy case or iron case
