ATTEN MS-300 3 in 1 Combination Hot Air Gun Desoldering Station DC Power Supply Maintenance System. 15V 3A dc power supply APS1503 + 1000w hot air gun ST-862D + 65w soldering iron ST-965, Combination maintenance system for soldering / de-soldering / dc power supply repair working.
Product Specification :
Soldering Station (ATTEN ST-965)
Automatic standby, automatic shutdown, intelligent timing.
With buzzer alarm function.
Temperature lock, temperature calibration and
Temperature alarm function.
Password protection function and temperature linkage switch function
The microcontroller controls temperature calibration.
The newly designed LCD display makes the controls visual.
Buttons for presetting or switching frequently used temperatures (1,2,3)
Hot Air Station (ATTEN ST-862D)
The LCD display makes the controls visible.
Temperature unit switch function.
Temperature lock, timing work function.
The single-chip microcomputer controls the temperature calibration and constant work compensation.
Powerful airflow and brushless fan.
Easy to replace the pluggable heater.
Convertible with straight and spiral air.
Auto sleep function.
DC Power Supply (ATTEN APS1503)
The USB interface, two-screen displays.
Using MCU digital string adjustment, low ripple, low noise, and high stability.
Adopting dual meter design, more suitable for telecommunication equipment.
Fast dynamic load response speed to optimize communication equipment.
Supports automatic recovery of overcurrent protection (OCP) and OHP.
The Independent USB interface can provide 2.1A current output, support DC and short circuit protection.
Package includes :
1pcs x Soldering Station ( ATTEN ST-965 )
1pcs x Hot Air Station ( ATTEN ST-862D )
1pcs x DC Power Supply ( ATTEN APS1503 )
JBC CDS CD-2SHQF soldering station with the JBC Advanced system for general electronic applications. The JBC CDS CD-2SHQF(CD-2SHE) soldering station with JBC soldering iron tips C210002 C210018 For electronic motherboard BGA IC soldering repair.
Note: JBC CDS CD-2SHQF Solder Station is now only 220v in our market, if you choose 110v, we will send you a voltage converter.
It works with the JBC exclusive heating system and the intelligent sleep & hibernation features.
Using the menu you can personalize over 20 parameters to help manage the soldering process.
It features a USB connector to update software, create graphs and manage parameters from a PC.
Complete cleaning system with an antisplash membrane to keep the work area clean.
Use the integrated wiper to remove excess solder from the tip.
Use T210 series handle, with C210 series iron head for precision welding
Power 40W. Can be used 300 degrees low temperature welding
You can use the USB-B type data cable to connect the computer to observe the temperature curve.
2 seconds to 350 degrees
Up to 20 sets of parameters can be set using the menu
Unique sleep + sleep function can extend the life of the tip 5 times
User-friendly handle control, very comfortable to use the feel
Specification :
Ambient operating temp.: 10-40 C / 50-104 F
Input Fuse: 1A (230V)
Output Peak Power: 130W / 23.5V
Package dimensions: 234 x 234 x 258 mm
Package weight: 5 kg
Size: 150 x 200 x 180 mm
Temperature selection: 90-450 C / 190-840 F
Tip to ground resistance:
Parameters :
Model: T12-11 soldering station iron
Temperature range: 0 C -400C
Working voltage: 110V/220V 50Hz/60Hz
Output voltage: 24V
Maximum power: 75W
Support English Menu
include 3 type tips
Features :
Super heat recovery, digital display.
Temperature locking system, sleep mode.
Temperature compensation, low temperature alarm.
Composite tip of excellent thermal recovery and accurate temperature setting.
Just need 3 seconds, you can do welding work.
The working life is 1-2 times of others tool.
Sleep function, Energy saving 30%-70%, don't need add tin to protect solder.
Independent intelligent temperature control system and heating system, heat transfer efficiency increased by 30%.
Continuous welding of five solder joints, the maximum loss of temperature less than 25
High efficiency anti-static function, electromagnetic shielding function, can be free to deal with all the electronic components of the special requirements.
The welding speed is improved, and the production efficiency is improved 30%-50%.
Lower temperature welding, below 50-100 than other welding tools, it is not easy to burn the bad components and circuit boards.
Low temperature welding plus sleep technology, the integration of welding nozzle long life.
ATTEN ST862D Intelligent digital display rework station For PCB chip soldering repair, 1000W Whirlwind ATTEN ST-862D lead-free hot air gun soldering station, ATTEN ST-862D Hot Air Rework Station 1000W Whirlwind 20L-120L/Min.
Feature:
1. The LCD screen displays the operating temperature and status to achieve visual and human-machine interaction.
2. Menu-style operation, three sets of fast temperature / air volume access keys to achieve common temperature fast switching, 100 C -480 C.
3. Strong airflow with brushless fans.
4. Plug-in heating chip replacement is fast.
5. Straight wind and spiral wind convertible.
6. Automatic sleep.
7. Temperature lock function, timed work function.
8. Software calibration temperature control function, temperature compensation, to achieve constant temperature work.
Input Voltage : 220V / 110V.
Power: 1000W.
Temperature Range: 100~480
Maximum Air Flow:120L/min.
ATTEN ST-965 lead-free Soldering Station Adjustable Temperature
ST-965 Soldering station :
Temperature locking,temperature calibration and temperature alarming function
Password protecting function and temperature unite switching function
Buttons(1,2,3) for pre-setting or switching frequently used temperature
New design with LCD display screen making control visualization
Automatic standby ,shutdown with smart time setting
MCU controlled temperature calibration
Beep alarm function available
Security sticker
Copper transformer
Pluggable heater
SMT Process
Define button :
decrease value
That shortly press button change value slowly, long press button change value rapidly
Long press both key at the same time to enter into menu mode
Key means save or confirm
3 groups of preset key
Key is 3 groups of preset key
Set preset value by long pressing key
Atten ST-100 100W ergonomically-styled 100W intelligent digital soldering station, Atten ST-100 is a newly designed, more intelligent, more reliable, more economical and more convenient digital small size soldering station with 80W heating element for temperature of 150 - 480 C. ATTEN ST-100 Solder station is more economical due it high performance and new features.
Atten ST-100 100W Premium Intelligent Soldering Station
Special Features :
Smart recognition for working and non-working status.
Intelligent cooling and temperature recovery.
Automatic standby, shutdown to ensure personal and property safety which also can extend product life.
Silver alloy heater to achieve quicker heating-up.
Brand new design and LCD display screen to display various setting parameters.
Newly designed menu which enable system setting easier.
Visual control over operation process in which analogue heating-up strength status bar to indicate heating up status.
3 buttons to store and retrieve frequently used temperature values quickly.
Temperature locking which make production line management convenient.
Smart standby, shutdown function, adjustable standby time and adjustable shutdown time enable more energy saved and environment friendly.
Touchtone which could be turned off and on.
MCU controlled temperature calibration was designed to be more accurate and more convenient which keep this product in good performance for long time to come.
This product was designed with low-voltage heater which is completely separated from power supply to keep soldering work safer.
This product was designed to be compatible with AT800 series excellent soldering
Tip which was assembled separately with heater to cut costs down.
Separate iron stand to save room and to make soldering station placement easier.
Technical Specifications :
Optional Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz
Power: 100W
Heater voltage: 24VAC
Temperature range: 150
Temperature offset range:
Temperature accuracy: 10 C
Temperature stability: 2C(in still air, no load)
Automatic stand-by time: 1-120 minutes
Standby temperature: 150 C
Automatic shutdown time: 1-120 minutes
Temperature adjustment: 5 digits (Default)/1 digit (Fine-tuning)
Heater: Silver alloy heater
Temperature lock: Yes
Touchtone: Yes
Tip-to-ground impedance:
Tip-to-ground voltage:
90W Quick 203H digital display soldering station for Phone repair, microsoldering tool QUICK 203H lead free ESD soldering iron rework station. Intelligent QUICK 203H welding station for soldering work. QUICK 203H 90W ESD Soldering Station With Digital Display.
Features:
1. Sensor close to Tip giving accurate Temperature Control
2. Fast heating and rapid thermal recovery
3. Suitable for lead-free soldering
4. Auto sleeping function available, energy-efficient.
5. With password lock function
6. Digital temperature calibration, the operation is simple and convenient.
Specifications:
1. Temperature range:50-600
2. Power:90W
3. Size:245 235 130mm
4. Voltage: 220V/110V
5. Temperature stability: 1
6. Resistance for ground :
Upgrade YIHUA 995D+SMD Soldering Station, PHONEFIX 999D Soldering Station With Pluggable Hot Air Gun Soldering iron BGA Rework Station Phone Repair Welding Station
power supply voltage: 110V,220V-240V
power : 750W (max)
Heat gun part
Airflow Type: Brushless fan soft wind
Temperature Range: 100 C 480 C
Wind flow: 120 L/min (max)
Temperature Stability: Good
Display type: LCD
Handle length: 100cm
Soldering iron part
Temperature Range: 200 C 480 C
Temperature Stability: Good
Tip-to-ground voltage: less than 2mV
Tip resistance to ground: less than 2ohm
Display type: LCD
Handle length: 100cm
Application:
1. Suitable for a various kind of soldering or de-soldering (removals)purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.
(Especially mobile phone s cable).
YIHUA 995D+SMD Soldering Station With Pluggable Hot Air Gun Soldering iron BGA Rework Station Phone Repair Welding Station
Specification:
Machine
power supply voltage: 110V,220V-240V
power : 750W (max)
Heat gun part
Airflow Type: Brushless fan soft wind
Temperature Range: 100 C 480 C
Wind flow: 120 L/min (max)
Temperature Stability: Good
Display type: LCD
Handle length: 100cm
Soldering iron part
Temperature Range: 200 C 480 C
Temperature Stability: Good
Tip-to-ground voltage: less than 2mV
Tip resistance to ground: less than 2ohm
Display type: LCD
Handle length: 100cm
Application:
1. Suitable for a various kind of soldering or de-soldering (removals)purposes of the electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.
(Especially mobile phone s cable).
2. Shrinking, paint drying, adhesive removal, thawing, warming, plastic welding.
700W CP-401 Heat Gun, 760W CP-601 2 in1 Soldering Station, 31L/min(MAX) 67dB 20-100 Wind level Soldering Station with Metal stand for Phone Motherboard Welding Repair.
CP-401 Specification:
Device parameters Equipment power:700W
Temperature range:100-450
Air volume range:20-100 Wind level
Air low volume:31L/min(MA)
Max Noise:67dB
CP-601 Specification:
Equipment power: 760W
Temperature range: 100~450 (212-842F)
Air volume range: 20~100 Wind level
Air flow volume: 31L/min(MAX)
Max Noise: 67dB
Soldering temperature range: 200-500 (392-932F)
Features :
1. Metal magnetic hibernation stand, place the stand automatically magnetic induction hibernation standby, pick up automatically and quickly return to temperature.
2. Fast heating hot air gun, temperature rises rapidly. good tinning effect, long life.
3. Large screen LCD display, thin and light, low power consumption.
4. Independent control of temperature and air volume.
5. Digital temperature / air volume calibration, more intuitive and convenient.
6. High temperature resistant flame retardant environmental protection material, artificial design.
For Toroidal Cores
TCW Series will operate with a wide range of steel qualities, producing outside
transformer core diameters ranging from 8 mm to 250 mm with a range of strip
width from 3 to 100 mm. The machine will strictly adhere to the core winding
specifications as it is manufactured to highest engineering parameters
activating advanced electronics in logic control sequences. The integral welder
is also under fully automatic control of the HMI and PLC that brought into
operation at the beginning and end of the transformer core winding cycle. The
welding system has been selected to complement the associated engineering
standards of the TCW Series to give the highest degree of reliability.
The all-digital non-contact infrared automatic cut-to-length cutting system developed is the first digital measurement, digital transmission, digital positioning and digital control technology in China. It is suitable for the primary and secondary cutting of continuously cast product of square billets, rectangular billets, slabs, round billets and shaped billets. It can automatically cut 1-48 billets to length at the same time, and display the casting speed and running status of each billet. The system has high measurement and control accuracy and strong anti-interference ability, which improves the output and quality of the cast products and reduces the labor intensity of the operator. The whole system has the advantages of low investment, simple installation, debugging and operation, and basically maintenance free. No need to change the original production equipment, a major breakthrough in the automatic cut-to-length cutting method, and it is also an important part of the continuous casting process, which has been highly praised by experts and manufacturers. Digital infrared cutting to length can also provide high-definition solutions, so that the measurement error is 1mm, and the system can support 12 strands high-definition CCD image measurement.
The features of the system
1. The system adopts advanced digital image processing technology (non-contact type) to identify the length of hot billet online, automatically controls the flame cutting machine to cut the hot billet to a certain length, detects and displays the running status and casting speed, and collects the image information of the moving billet from a long distance through an infrared camera.
2. The computer processes the image information by pattern recognition program, forms the operation information and converts it into the electrical signal of the specified format, so that the hot billet can be cut by the actuator. The system can cut the 1-48 billets to length at the same time with an infrared camera.
3. A schematic diagram of the overall layout and working principle of the system is shown in Figure 1.
MAC-G320 automatic mold flux feeding system is a new generation product of automatic adding mold flux, which is independently developed According to different steel grades, casting speed, vibration and other process parameters, then the system can analyze and calculate the accurate mold flux addition amount through intelligent software. Then the system sends out signals to control the mold flux addition process and mold flux addition amount, and designs appropriate nozzles and propellers according to the fluidity of molten steel in the mold and the ductility of mold flux. After the system setting is completed, there is no manual intervention is required. It completely replaces the whole process of manual addition of mold flux, and realizes the automation of mold flux addition.
The features of the system
1. The system automatically controls the amount, process and time of adding mold flux according to the process requirements of automatic mold flux addition, so as to maintain the physical state of the mold flux and prevent it from being broken.
2. The user can match different parameters according to actual needs, so as to change the length of the mold flux feeding time and the amount of mold flux, which can suit for the use of different sections and different casting speeds.
3. The casting speed signal is used and the amount of adding mold flux can be automatically adjusted according to the casting speed. The mold flux can be added timely and evenly, which can improve the quality of the billet and reduce labor intensity.
4. The time is controlled by PLC, no manual intervention is required. The adjustment is very convenient. It has manual, automatic, local and remote control modes.
5. The system has reliable performance and simple structure, and can be adapted to powder and granular mold flux.
6. It has a special anti-blocking nozzle and backflushing design to overcome the phenomenon of pipeline blockage.
The technical parameter
Mold width: 500-2000mm
Mold thickness: 100-500mm
Type: screw conveying type mold flux feeding machine
Heating method: stirring electric heating
Arrangement location: on the pouring platform (with its own wheels to move)
3 in 1 laser welding machine produced by Five Laser. It will be best choice for customers, because the system can do laser welding, cleaning (rust removal), handheld metal cutting in one machine. The laser power have 1000w, 1500w, 2000w & 3000w for optional.
FAW-1000 (1000w)- For welding 0.5~2.5mm stainless steel.
FAW-1500 (1500w)- For welding 0.5~3.5mm stainless steel.
Welding width 5mm max. welding width
Welding head weight: 0.7KG only
Cleaning width: 80mm max. cleaning width
Cutting function: Cutting by handheld
Laser source Raycus laser source as standard
Laser source option JPT Max lasers
Cooling: Teyu S&A water chiller for cooling
Dispaly: 7 touch screen
Machine size: 96 60 68cm (1000w & 1500w)
Machine size: 110 60 75cm (2000w & 3000w
The company specializes in the production and sales of laser welding machines, laser marking machines, laser cleaning machines, CO2 laser cutting machines, and automatic welding machines. Laser light source, power supply, water tank, fan, all spare parts are sold
Fiber laser welding machine is an advanced welding technology which is a perfect replacement of traditional electric welding, MIG and CO2 welding.
Laser Cleaning process is to melt the connecting area by a very high-energy and dense beam with a large amount of heat. The single module optical fiber laser source provides consistent and stable power and high quality of laser beam. The laser power range can be adjusted according to actual production needs. This solution guarantees unparalleled application flexibility and high reliability.
Parameters
Laser 1000W 1500W 2000W 3000W
Cleaning head TOPtek PRO WOBBLE
Wire feeder TOPtek EasyWIRE
Control system TOPtek PRO Cleaning
handheld laser welding solutions. Adhering to the deep professional ability, numerical control system, high-speed transmission system and other core technologies, we are committed to providing high-quality welding solutions to customers in various industries around the world.
After decades of development, the company has become a modern high-tech enterprise integrating research and development, sales, production and service.
Parameters
Laser output power: 20W/30W/50W Laser wavelength: 1064N
Pulse frequency: 20KHz-100KHz Standard engraving range: 100mmX100mm
Minimum line width: 0.001M Repeat accuracy: 0.001mm
Total power: 500W Engraving depth: 0.2mm
Minimum characters: 0.15mm Engraving line speed: 7000mm/s
Optical system size: 500mm Control System: PZDZ
Cooling Systems: air cooling
Fiber laser welding machine is an advanced welding technology which is a perfect replacement of traditional electric welding, MIG and CO2 welding.
Laser welding process is to melt the connecting area by a very high-energy and dense beam with a large amount of heat. The single module optical fiber laser source provides consistent and stable power and high quality of laser beam. The laser power range can be adjusted according to actual production needs. This solution guarantees unparalleled application flexibility and high reliability.
ROLLED OVER TRADITIONAL WELDING IN ALL ASPECTS
1.Faster speed: the welding or cleaning efficiency is 5-10 times higher than traditional welding.
2.Easy operation:No need experienced operator, any green hands can operate it within 30 minutes training.
3.Cost-saving: 80% cost-saving than traditional electric welding, MIG welding, argon arc welding. Less operator, less consumption(gas and consumables etc.) and less working time. For example,if the workload equals 1 experienced operators working in 10 hours, but with the laser welding or cleaning machines, only 1 ordinary being can fix it in 3 hours.
4.Welding seam is almost invisible, and smooth welding surface.
5.Very small deformation on Workpiece.
6.Operation safer.
7.Environmental-friendly welding.
Technical Parameters
Name Portable laser welding machine Welding thickness Carbon steel,Stainless steel (0.5-8mm)
Laser Power 1000W/1500W/2000W/3000W Welding seam 0.5mm
laser wavelength 1064 NM Voltage AV 220V/380V
Laser cable length Standard:8-10� meter, Max:15meters Laser lifetime 100,000 hours
Working mode Continuous Working humidity range
