Main features:
1.It applied to plastic products in the aspects of riveting, cutting, sealing and welding.
2.Optimization of the heat welding defects (yellowing, edge burning and blocking up).
1.Lift body electrically and adjust moulds conveniently and efficiently;
2.Weld pe, pp, nylon and pet which cannot be fused together by hot melting and ultrasonic welding.
3.Provide high-torque movement device with motor 1-50 ma
1.Choose different horns and corresponding bases according to different working parts.
2.Have low demand of mental welding surfaces and no need of any flux.
3.Be applied for fusing nickel net of ni-h battery and nickel sheet, aluminum foil and aluminum sheet and so on.
4.Fuse one and more together.
1.According to the products, choose pneumatic, hydraulic or servo motor drive.
2.Such parameters can be adjusted as welding temperature, heating time, cooling time, welding depth, pressure, transferred time.
3.According to the requirements of the welding procedure, choose semi-automatic or full-automatic mode.
4.According to the requirements of various materials, adjust the welding procedure.
Dimension: l1070mm*w1180mm*h2100mm
Weight: 500kg
Drive mode: pneumatic, hydraulic or servo motor drive.
Application: lighting, auto radiator, the hydrant of washing machine, storage battery, steam iron.
3396 Welding Wire Mesh Machinery Suppliers
Short on time? Let Welding Wire Mesh Machinery sellers contact you.
1.Set one-point or overall temperature-controlling riveting according to various car doorsí» welding areas.
2.Plc programmed control systems and human-computer interface for adjusting welding parameters.
3.The machine frame is weld with high-quality ú¼so it is of steadiness and high reliability.
Model: keb-qcmb50
Dimension: l1750mm*w1100mm*h2500mm
Weight: 300kg
Welding time: 50-120s/pcs
Application: car door, hood, instrument platform and etc.
1.Machine type 14db
2.Inlet diameter(mm) 0.6-1.2
3.Outlet diameter (mm) 0.25-0.5
4.Max. Speed(mpm) 800
5.Max.Number of drawing dies 14
6.Slip ratio of m/c 12%
7.Fix speed capstan slip ratio 8%
8.Capstan : tungsten
9.Max. Capstan dia.(mm) 380
10.Fix speed capstan dia. (mm) 330
11.Frame : welded by steel plate
12.Main machine power : 18.5kw three phase inductor motor
13.Spooler power : 5.5kw three phase inductor motor
14.Correction system : automatically control
15.Transmission method ú¦by timming belt
16.Pay-off method : over head
17.Tension control : pneumatic balance by swing arm
18.Lubrication system of drawing : half-immersing
19.Suitable spool (mm) 300
20.Capacity for take-up(kg) 35
21.Loading & unloading method : shaft type
22.Service voltage 380v
23.Brake : electromagnetic brake
24.Machine dimension(mm) : 1950l*1100w*1750h
25.Machine weight(kg) 2200
1. Cutting shaft and circular blade are driven by a.C motor with inverter control, which able to set rpm and running direction obverse/reserve on different requests.
2. Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement.
3. Functions are operated under lcd touch panel control, which is operator friendly and easy for data setting.
4. Central control system is plc unit, it can cut various sizes on one log roll by changing modes automatically.
5. Knife feeding is controlled by servo motor, the cutting speed is adjustable in high/low.
6. Equipped with knife angle auto adjustment, cutting angle can be changed from 8 to +8 degree automatically for making roll surface smoothly.
7. Safety cover: to protect operator during the production.
8. Sharpening device: grinding knife on the machine to save time for taking blade off.
Optional part:
1. Other size cutting shaft: it can be made as per the required core i.D.
2. Cutting supporter: for supporting log roll when cutting core below 38mm.
1. Equipped with connected unwind base and web pulling out by jog motor control.
2. Equipped auto tension controller and surface type lay on roller on unwind base to make web wound out smoothly.
3. Driven by 2 a.C motors, 1 for web feeding, 1 for rewind tension control which automatically increasing toque on the rewind shaft when the finished roll o.D is getting bigger.
4. Center type winding with surface pressure roller to rewind various materials on different requests.
Optional part:
1. Unwind pick-up lift : for loading jumbo roll on the machine quickly and time saving.
2. Equipped with separated shaft type unwind base.
3. Safety cover: connected unwind safety cover, hydraulic control.
4. Tabbing device :automatic tabbing on the web during the production.
5. Slitting device : able to be equipped with air score knife and trim removable unit for trimming at both sides and wide size slitting.
6. The air for the rewind shafts will be automatically filled and leaked in the production.
7. Material end cutting off and log roll wiping down are all applied automatically during the production and rewinding is finished.
Typemodel gbchemical composition (% )coordinated flux
Cmnsispcrnicu
Thm-43
Thg-43h08a
H08e
H08c0.100.30/0.600.030.030
0.020
0.0150.030
0.020
0.0150.20
0.10
0.200.30
0.10
0.300.20sj301 sj501 and hj431 and so on
Thm-43a
Thg-43ah08mna0.100.80/1.100.070.0300.0300.0200.300.020sj101sj127sj501 and hj431 and so on
Thm-43b
Thg-43bh10mn2
H10mn2a0.12
0.171.50/1.90
1.80/2.200.07
0.050.035
0.0300.0300.0200.300.020sj101sj127sj501 and hj431 and so on
Thm-50
Thg-50h08mn2si0.111.70/2.100.65/0.950.0350.0350.0200.300.020sj101sj201sj501 and hj431 and so on
Thm-50a
Thg-50ah08mn2sia0.111.80/2.100.65/0.950.0300.0300.0200.300.020sj201sj501and hj431 and so on
Note: thg-43 thg-43a thg-50 thg-50 are the welding wire of non-copper coating(low bright, antirust treatment)
Typemodel
Gbusage
Thm-43
Thg-43h08a
H08e
H08cfor welding low carbon steel and some low-alloy steel(16mn) structures with flux hj430, hj431, hj433.
Thm-43a
Thg-43ah08mnafor welding low carbon steel and low-alloy steel(16mn) structures with flux hj430, hj431, hj230, hj330.
Thm-43b
Thg-43bh10mn2
H10mn2afor welding low carbon steel or 50kg.F/mm 2 high-strength steel structures like boat, heavy-machines, pressure container and bridges.
Thm-50
Thg-50h08mn2sifor welding 50kg.F/mm 2 high-strength steel structures or sheet.
Thm-50a
Thg-50ah08mn2siaditto
Note:thg-43 thg-43a thg-50 thg-50 are the welding wire of non-copper coating(low bright, antirust treatment)
The flux-cored welding wire is intended to inert-gas shielded fusion welding of titanium and its alloys and includes a metal coating or tubular casting of titanium or its alloys and a powder flux core containing (per cent by weight):
Baf2 -- 5 to 10,
Fluoride of a rare-earth element -- 18 to 20,
Caf2 -- 40 to 50,
Srf2 -- the rest,
The ratio of the weight content of the powder flux to the total weight content of titanium in the wire being from 0.3: 1 to 1: 1.
Application and features:
Suitable for butt welding of plastic pipes and/or fittings made of pe, pp and pvdf in worksite or workshop.
Consists of basic frame, hydraulic unit, planing tool, heating plate, support for planing tool&heating plate, and optional parts.
Removable ptfe coated heating plate with high accurate temperature control system.
Electrical planing tool with safty limit switch.
Be made of lightweight and high strength material; designed with a clamp opening angle of 45 degrees c.
Low starting pressure and high reliable seal structure.
Changeable welding position enables to weld various fittings easier.
Separate two-channel timer records time in soaking and cooling phases.
High-accurate and shockproof pressure meter indicates clearer readings.
Optional parts:
Stub end device for flange stub.
Data logger.
Crane.
Horng Shin Electric Co., Ltd has devoted its considerable resources towards developing the most efficient solid state high frequency technologyies. Horng shin understands the increasingly competitive market in which high quality requirements and reduced costs are the guarantee of succes. Horng Shin offers solid state high frequency welding machines in variable ranges from 100kw to 1200kw. The product feature of solid state high frequency welder contains five main parts as follows:
(1) Low voltage transformer
(2) D. C power supply device
(3) High frequency oscillator device
(4) Water cooled system
(5) Operation and control device
In general, there are four advantages by using solid state high frequency welder as below:
(1) Protected devices
(2) Low internal voltages
(3) Small compact size
(4) Reduced purchasing of spare parts
24db stainless steel wire drawing machine machine parameter
Machine type 24db
Inlet diameter(mm) 0.5-1.0
Outlet diameter (mm) 0.08-0.25
Max. Speed(mpm) 800
Max.Number of drawing dies 24
Slip ratio of m/c 13úÑ
Fix speed capstan slip ratio 8úÑ
Capstan tungsten
Max. Capstan dia.(mm) 194
Fix speed capstan dia. (mm) 159
Frame cast in iron
Main machine power 15kw three phase ac-motor
Spooler power 4kw three phase ac-motor
Correction system automatically control
Dynamic control double frequency converters control
Transmission method flat belt
Pay-off method over head
Traversing method flat belt + timing motor
Tension control weight balance by swing arm
Lubrication system of drawing spray
Suitable spool (mm) 200
Capacity for take-up(kg) 13
Loading and unloading method shaft type
Service voltage 380v
Brake pneumatic brake
Machine dimension(mm) 2050líß1600wíß1900h
Machine weight (kg)2500
Machine type 24tb 32tb-a 32tb-b
Number of wire (mm) 24 32 32
Production diameter(mm) íT0.02-íT0.07 íT0.08-íT0.15 íT0.15-íT0.4
Max. Speed(mpm) 250 250 250
Pay-off method pay-off with hairbrush pay-off with hairbrush pay-off with hairbrush
Annealing method tubular annealing tubular annealing tubular annealing
Annealing length(m) 1 2 4
Spool dimension(mm) íT115ú¼íT80 íT115ú¼íT80 íT115ú¼íT80
Electro thermal power(kw) 11 24 48
Dynamic power(kw) 3 4 4
Total power(kw) 14 28 52
Take-up & traversing control each head controlled by a motor each head controlled by a moto each head controlled by a moto
Machine dimension(mm) 10000líß2000wíß2000h 11000líß2200wíß2000h 13000líß2200wíß2000h
Machine weight(kg) 3000 3300 3600
24vb stainless steel fine wire drawing machine technical parameter
Machine type 24vb
Inlet diameter(mm) íT0.09-íT0.3
Outlet diameter (mm) íT0.02-íT0.07
Max. Speed(mpm) 800
Max.Number of drawing dies 24
Capstan tungsteníí
Max. Capstan dia.(mm) íT130
Frame welded by steel plate
Main machine power automatically control
Correction system double frequency converters control
Dynamic control dual inverter control
Transmission method flat belt
Pay-off method hairbrush wire placing
Traversing method timing motor
Tension control tension tape wheel device
Lubrication system of drawing spray
Suitable spool (mm) 250
Capacity for take-up(kg) 3.5
Loading & unloading method shaft type
Service voltage 380v
Brake electromagnetic brake
Machine dimension(mm) 2300líß1300wíß1700h
Machine weight(kg) 1500
