Ll-228+p full digital intelligent wire stripper (special for sheathed cable cutting stripping) Description Ll-228+p full digital intelligent wire stripper is a heavy duty speedy industrial full automatic wire stripper, controlled by a microcomputer, cut and strip wire automatically.Unexperieced user can operate it easily.Support full strip, half strip and semi-strip.Installed 200 processing programmes, no need to reset program while change product.Can be customized to hold up wheel in customer's demand. Approriate wire: power cord, rvv (jacketed cable), rwp (shielded cable), audio cable, video cable, usp cable, data cable, phone cable. Specifications Model:ll-128+p Processable wire size: awg18-awg3/0 / 1-10mm Conduct diameter:10 max Cutting tolerance: 0.002¡,Á,l mm (l: cutting length) Strip length:wire head 0-50mm // wire tail 0-40mm (if hold up wheel, wire head can strip at 500mm, wire tail can at 50mm) Total quantity:999999 Batch quantity:99999 Stripping speed:2000-5000pcs per hour Cutting speed:0-9 adjustable Blade material:hard tungsten steel Power supply:ac 215-235v/50hz Power consumption: 120w-200w Overall size: 420mm x 400mm x 320mm Machine net weight: 32kg /70.55lb Driving:four wheels driving Package:standar export wooden case Delivery time:5-7 working days after reciept of payment Shipping:ems/dhl/tnt/fedex or seafreight or airfreight Overall size: 420mm x 400mm x 320mm Machine net weight: 32kg /70.55lb Driving:four wheels driving Package:standar export wooden case Delivery time:5-7 working days after reciept of payment Shipping:ems/dhl/tnt/fedex or seafreight or airfreight
Ll-228+t full digital intelligent wire stripper Description Ll-228+t full digital intelligent wire stripper is a heavy duty speedy industrial full automatic wire stripper with twisting function, controlled by a microcomputer, cut and strip wire automatically.Unexperieced user can operate it easily.Support full strip, half strip, semi-strip and automatic twisting.Installed 100 processing programmes, no need to reset program while change product.Automatic out/inlet line, timing start, unique wire stripping stacking.No.96 program is specially for ultra short wire.Very suitable for large and small variety production, transformation wire specification only need to change conduct can production. Approriate wire:hookup wire, teflon, glass wire, silicon rubber wire, shielded wire, coaxial cable Specifications Model:ll-228+t Cutting wire size: awg14-awg30x2 ("2" stand for dual core wires) / 0.1-2.0 mm2*2 Conduct diameter: ¦µ1.5-¦µ5 mm Twisting wire size: awg16-awg30x2 Cutting tolerance: 0.002¡Ál mm (l: cutting length) Strip length:wire head 0.1-30mm // wire tail 0.1-30mm Twist length:0-30mm Total quantity:999999 Batch quantity:99999 Stripping speed:4000-8000pcs per hour Stripping twisting speed:5000-10000pcs per hour Pulse equilevant: no error within 1m wire. Blade material:hard tungsten steel Power supply:ac 215-235v/50hz (other voltage required please tell us in advance) Power consumption: 120w-250w Overall size: 420mm x 580mm x 320mm Machine net weight: 35kg /77.16lb Shortest wire twisting function:wire intermediate leave rubber skin 26 mm can be twisted. Semi-cut strip:16 places Driving:four wheels driving Package:standar export wooden case Delivery time: 5-7 working days after reciept of payment Shipping:ems/dhl/tnt/fedex or seafreight or airfreight Overall size: 420mm x 580mm x 320mm Machine net weight: 35kg /77.16lb
Ll-228+m full digital intelligent wire stripper Description Ll-228+m full digital intelligent wire stripper is a heavy duty speedy industrial full automatic wire stripper, controlled by a microcomputer, cut and strip wire automatically.Unexperieced user can operate it easily.Support full strip, half strip and semi-strip.Installed 100 processing programmes, no need to reset program while change product.Automatic out/inlet line, timing start, unique wire stripping. No matter how long wire head or tail you need split, only a set of splitting blade mould can be universal. Splitting length of front-end and back-end can be accessed to change the blade mould length parameters, do not need to move the mechanical position. Supporting stamping equipment (common linkage terminal machine, mute terminal machine, cylinder driving stamping die, motor driving punching die, beetle punch press.) Approriate wire:rvb wire, parallel wire Specifications Model:ll-128+m Processable wire size: awg14-awg30 / 0.1-2.0mm2 Cutting tolerance: 0.002¡Ál mm l: cutting length Strip length:wire head 0-30mm // wire tail 0-30mm Total quantity:999999 Batch quantity:99999 Stripping speed:3000-7000pcs per hour Cutting speed:0-9 adjustable Blade material:hard tungsten steel Power supply:ac 215-235v/50hz Power consumption: 180w-260w Overall size: 630mm x 420mm x 330mm Machine net weight: 40kg /61.73lb Driving:four wheels driving Package:standar export wooden case Delivery time:3-5 working days after reciept of payment Shipping:ems/dhl/tnt/fedex or seafreight or airfreight Overall size: 630mm x 420mm x 330mm Machine net weight: 40kg /61.73lb
Ll-228+l full digital intelligent wire stripper (special for large diameter/bold cable cutting stripping) Description Ll-228+l full digital intelligent wire stripper is a heavy duty speedy industrial full automatic wire stripper for large diameter cable cutting and stripping, controlled by a microcomputer, cut and strip wire automatically.Unexperieced user can operate it easily.Support full strip, half strip and semi-strip finalize in one time.Installed 100 processing programmes, no need to reset program while change product. Approriate wire:power cord, cable wire, large diameter/bold cable Specifications Model:ll-228+l Processable wire size: awg5-awg27 / 0.1-16mm2 Conduct diameter:¦µ16 max Cutting tolerance: 0.002¡Ál mm (l: cutting length) Strip length:wire head 0-30mm // wire tail 0-25mm Total quantity:999999 Batch quantity:99999 Stripping speed:2000-7000pcs per hour Cutting speed:0-9 adjustable Blade material:hard tungsten steel Power supply:ac 215-235v/50hz (other voltage required please tell us in advance) Power consumption: 120w-200w Overall size: 420mm x 400mm x 320mm Machine net weight: 35kg /77.16lb Driving:four wheels driving Package:standar export wooden case Delivery time:5-7 working days after reciept of payment Shipping:ems/dhl/tnt/fedex or seafreight or airfreight Overall size: 420mm x 400mm x 320mm Machine net weight: 35kg /77.16lb
This is a ring making and welding integrated machine, no extra butt welding is required, machine can work with carbon steel wires and galvanized wires. Very robust and durable machine body Length controlled by encoder, higher precision Program-aided size change, quick and accurate Servo motor inside, better precision and less maintenance than hydraulic system Intelligent controlling system, easier program updating and function expanding Comprehensive self-detection, machine will stop in cases of no wire, bad weld, etc. Voltage can be customized to suit your power supply Standard
This continuous lead-sheathing extruder system is for lead sheath extrusion of cables and lead covering of vulcanization of rubber tubes. Diameter range of lead sheath extruded is from 10mm to 110mm. There are two types of die rack. One is for dia. Between 10mm to 80mm, and another is for dia. Between 40mm to 110mm. Customer could choose one type or both types. Both pure lead and lead alloy could be extruded properly by the machine. There are generally 4 types of lead alloys like the following: A.Alloy of lead and antimony, percentage of antimony 0.5%-0.6%. B.Alloy of lead, tin and antimony: Percentage of tin: 0.4%, percentage of antimony: 0.2% C.Alloy of lead, tellurium and copper Percentage of tellurium: 0.04% D.Alloy of lead, tin and cadmium Percentage of tin: 0.2% 1.Main composition: 18-ton lead smelter 10-ton holding & cleansing furnace Vertical type lead sheath stripper Lead strip conveyor & feeder Main engine and extruder Take-up Control panel 2.Main technical data: Diameter of lead sheath extruder screw: 150mm Cooling water capacity: 6.8t/h Rotate speed of screw: 5-150rpm Total power: 145kw Turnout of lead extruder: Pure lead (13-15rpm): 30-35kgs/min Soft alloy (11-12rpm): 20-22kgs/min Hard alloy (9-10rpm): 15-16kgs/min Power of 18-ton lead smelter: 141.1kw Power of 10-ton holding cleansing furnace: 101.1kw Power of vertical type lead sheath stripper: 15kw Power of lead strip conveyor & feeder: 1.5kw Diameter range of lead sheath: a die stator fame 10-80mm B die stator fame 40-110mm Dia. Range of drum of take-up: Ф250-Ф2500 Capacity of 18-ton lead smelter: 18ton Overall size: 22000 x 13340 x 5100mm Capacity of 10-ton holding & cleansing furnace: 10ton Total weight: 41100kgs Nude packing in contains
This tubular stranding machine is applied to copper wire, steel core, al wire or steel cable twisting. And it is also suitable for al-clad steel and al alloy twisting. This machine has high mechanical, high reliable, high production efficiency with low energy consumption. It is with compact composition, easy to operation and low running noise. Main technical specification 1. Single wire diameter: .0mm 2. Max. Stranding dia.: 21mm 3. Max. Rotating speed of the tubular: 600r/min 4. Drawing wheel diameter: 1250 (duel wheel )mm 5. Pulling wire speed: 15.7-246m/min 6. Pitch range: 40.22-448.07mm 7. Direction of stranding: two directions, left and right 8. Main motor (alternation frequency conversion motor frequency conversion adjusting speed) y280-8b3 740r/min 45kw (ac vs) 9. Take-up motor bpy132s-4, 5.5kw frequency conversion motor 10. Outlet wire speed 15-110m/min 11. Front pay-off reel 630 x 355 x 475 (hole 127)mm 1000 x 490 x 710 (hole 80) mm 12. Pay-off reel in the tubular 630 x 355 x 475 (hole 127)mm 13. Take-up bobbin pn800-pn2000mm 14. Overall size 23850 x 2680 x 1626mm Nude packing in container
This line is designed to produce 8mm low oxygen and bright copper rods by means of continuous casting and rolling. The raw material is cathode copper or red copper scraps. This line is composed of one or two 6-100 ton stationary reverberatory furnace(s), five-wheel casting machine, pulling machine, rolling shearer, straightener & angle shaver, cast bar brushing machine, rolling machine, bright rod orbital coiler, electrical control system, etc. The 12t/h melting shaft furnace and 12t holding furnace are provided when copper cathode are used. 4. Main technical data 1) Outlet copper rod dia. 8mm 2) Production capacity around 16t/h 3) Coil’s weight 3.0-5.0 ton 4) Main equipment total size: 42x7.8x5.1m (melting furnace and recycling cooler & filter excluded) 5) Main equipment total weight( melting furnace excluded) 82 ton 6) Main equipment total power(melting furnace excluded) 600kw 5. Line composition 1) Five-wheel continuous casting machine (patent no. Zl00244512.3) 1 set 2) Automatic shearer 1 set 3) Straightening & shaving machine 1 set 4) Cast bar brushing machine 1 set 5) Automatic feeding continuous rolling mill 1 set 6) Continuous rolling mill emulsion lubrication system 1 set 7) Rolling mill oil lubrication system 1 set 8) Coiler 1 set 9) Electrical control system 1 set Nude packing in container
1. Application: The line is mainly used to draw from dia.8mm copper rod to dia.1.3-4.0mm copper wire. And it also can continuously anneal when the drawing. The products produced from this line accord with gb3953 requirements. 2. Main data: 1) diameter of inlet wire: 8 mm (cool rolling solid copper rod) 2) diameter of outlet wire: 1.3-4.0mm 3) no. Of drawing mold: 13 4) diameter of drawing wheel: 450mm x 400mm x 65mm 5) max speed of outlet wire: 25m/s 6) annealing method: dc annealing 7) main motor: 280kw (dc), 1000r/min 8) motor z4-200-31 for capstan with fixed speed: 90kw(dc), 1500r/min 9) power of motor for take-up with double reels: z4-132-3, 22kw (dc, 2 sets) 10) annealing power: 360kva (max.) 3. Composition of the equipment 1) pay-off frame with column and rocker 1 set 2) main machine for drawing with horizontal sliding 1 set 3) device for horizontal continuous annealing 1 set 4) device for tension controlling of accumulator 1 set 5) take-up machine with double reels 1 set 6) take-up machine in the way of loop 1 set 7) machine for crushing head through mold 1 set 8) electrical control system 1 set 9) steam generator 1 set 10) lubricating system for gear box 1 set Nude packing in container
Cut40 pilot cutter series are inverter plasma cutting machines which are made by international most advanced inverter technology.Inverter cutting power supply is inverter cutting macines which are sprung up in 1980s in international market.50/60hz frequency is inverted to high frequency by mosfet, and then it step down voltage and rectificate current, inverter cutting power supply generated powerful dc cutting cuttrent throught pwm technology.Because inverter technology of switch power is used, dimensions and weight of cutting macines have been reduced substantially and efficiency have been increased by 30%. Accessory 1) one pcs sg-55 high quality cutting torch with 6 mm2 cable and thicker cover to pretect the torch. 2) one pcs earth clamp with lead. 3) one pcs air pressure regulator. 4) one pcs air hose. 5) two pcs hose clamps. 6) one set free consumables for sg-55
Brand new 40a air plasma cutting torch (gun) pt-31 / lg40 can be used for machines such as cut30 , cut40, lgk40, ct312, ct416, mtc-120, mtc-120p, mtc-160, mtc-160p super-160, super-160p, etc. Also , they work for the following brand machines such as rilon , riland , jasic, mitech, chiry, unt, krypton, longetivity, and so on. Rated welding current: 40 a Max cutting thickness: 8 mm The length: 4 meter (13 feet)
Welding function: mig/tig/mma Input voltage(v) : 220v/230v Rated input current(a): mig-34.8a tig-26a mma-40.6 Rated input power(kw): mig-6.1kw tig-4.6kw mma-7.2kw Current range(a): 5-200a No load voltage(v): 63v Duty cycle 25c 10min : mig-200a 40% tig-160a 60% mma-140a 100% Protection class: ip23s Insulation class: f Dimensions : 440x215x405 Www.Chnsales.Com show all information
39 pieces tig welding kit lanthanum tungsten electrode for 140-200a. These 39 accessoried include: 4 pcs ceramic nozzles #4 4 pcs ceramic nozzles #5 4 pcs ceramic nozzles #6 4 pcs ceramic nozzles #7 4 pcs ceramic nozzles #8 3 pcs collets ø2.0mm 3 pcs collet bodys ø2.0mm 10 pcs lanthanum electrodes ø2.0*150mm 1 pcs long back cap 1 pcs medium back cap 1 pcs short back cap Lanthanum - tungsten electrode is currently the most popular international electrode materials, especially the content of 1.5% ( with a content of 2% difference ) of lanthanum tungsten electrode. Scientific studies show that, 1.5% lanthanum tungsten has the closest 2% thorium tungsten demonstrated by the conductive performance, therefore, the welding personnel can easily replace the electrode, without changing the parameters of the equipment. In 1998 there was a very famous field test, is the 2% thoriated tungsten electrodes, tungsten electrodes 2% and two manufacturers of 1.5% tungsten electrodes respectively in 70 and 150 amperes of electric current, 300 v dc welding task environment, the fruit is, in these two cases, 1.5% lanthanum tungsten electrodes show the excellent welding performance, at the same time, but also reflects its burn rate of small features. Lanthanum - tungsten electrode is also applied to the ac welding task, and performance.
1 small size, light in weight. Loer energy consumptiom. 2 good arc-starting and arx-force. Workablr against distrub. 3 stable arc, little spatter. 4 good welding quality, deep melting pool, reliable effect. 5 slef-protection against over voltage and over current. 6 stable performance, continiuous work, automatic compensation for voltage fluctuation. 7 stable for welding with different kinds of acidic and basic rod. Carton
We export: mma, tig, cut, mig, bx1, bx6, cd, cb, etc....Series, with spot welding machine & battery chargers, cutting machine, milling machine, drilling machine.
Model NumberOH100 AC Voltage Requirement (V)220/110 Phasesingle DC Voltage &Current (A)5V 60A Max Gas Output100L/h Max. Working Pressure (kg/cm2)1.3 Max. Water Consumption (L/h)0.06 Water Feedmanual Max. Flame Modifier Consumption (L/h)0.05 Flame Modifier Feedmanual Dimensions - L*W*H (mm)480*280*360 Gross Weight (kg)12 Ventilation Space Requirement (mm)200 in each direction. Dimensions - L*W*H (mm)480*280*360 Gross Weight (kg)12 1set /wooden case
Technology of okay energy 1) patentedintegration ofwater electrolysis cellforming 2) patented electrolysis power supply based scm 2.1 constant current controlby temperature feedback control 2.2 current adjust byuser to meet the constant flux ofoxy-hydrogen gas 2.3 efficient energy conversion (ac to dc) based igbt 2.4 specialcooling design forworking24hours continues. 3) patented multi-layer anti-firewater seal technology 4) automatic water level detection technology 5) water automatic replenishmenttechnology 6) high-efficiencygaswater separatortechnology 7) electrolyte-automatic cycletechnology 3.Application of okay energy oxyhydrogen generatorokay oxy-hydrogen generator has successfully applied in ampoules melt sealing, platinum resistor welding, air-condition welding, musical instrument welding, varnished wire welding, steel plate cutting, thermocouple welding, quartz glass tube sealing, water injection wiredrawing sealing, storage battery welding, pharmaceutical glass tubes sealing, automobile engine carbon removal and other fields.At the same time, it is often used in jewelry welding, acrylic polish , hook welding, spectacle frame welding, waxy film repair, mould repair, etc. Model numberPf3500 Ac voltage requirement110v/220v ¡à10% Frequency 50/60hz Dimension- l*w*h380mm*190mm*140mm Weight8kg Torch weight0.9kg Flame temperature 8000¡æ Welding typeElectro gas welding Steel cutting thichness< 6mm Steel cutting speed>7mm/s (when thickness of steel is less than 2mm) Steel kerf
Zx7-a series inverter welder Single-phase, portable, fan-cooled, overheating protection, movable welding cable Adopt with advanced igbt inverter technology, portable, light weight, accord with emc standard Stepless current adjustment, suit for mma family series electrodes and various electrodes welding.
Zx7 igbt inverter dc arc welder Inverter technique makes the welder runs in high utilization rate of power, low open circuit loss and has good welding quality; Suitable for smwa/mma welding of low carbon steel and low alloy steel with all kinds of electrodes.
Both machenical and manual power used. High quality of export level
