This device is the new idea of portable induction heating method, in the old times, if you need to heat a metal part, you have to use nothing but fire (oxygen-acetylene). It somehow has the potential danger for the man who use it.
Thanks to the electro-magnetic induction, now we can use only electricity, with a voltage lower than 36v on the coil, it will be safer than any other means heating. Fast and clean, easy to adjust to any position.
This device generally used in
1. In the garage repairing center: rusted bolt are not easy to remove from the old component, with durowelder-1kw, you can heat it to nearly 800 celsius without fire, much easier to remove rusted bolt, stuck bolt, rusted nuts on vent pipe caused by sault road.
2. Remove bumper sticker by a flat coil, easy to heat car body surface above 60 centigrade to remove stickers.
3. Doing car side moldings
Max heating iron temperature: 800 celsius
Heating bolt/elements size: 16-40mm
Heating one 20mm bolt to red within 30 seconds
Voltage: 110v/220v/240v, 50/60hz
Power: 1000w
Numbers of coils:
Diameter 30mm*2pcs
Diameter 40mm*2pcs
Diameter 50mm*2pcs
Spare copper coil for different shape parts*2pcs
Device warranty: one year free technique support and maintenance.
Leading time:
Sample order: have in stock, send out immediately after order.
Bulk order: depends on the quantity, 3-20 days.
Shipping:
Sample order deliver by dhl, fedex, ups express, normally takes 4-6 days deliver to your hands (door to door)
Bulk order may deliver by sea shipping (we can arrange for you till it arrives to your city local port).
DFI Series Digital Force Gauge is our latest microprocessor digital indicator gauge. It has inputs both for dynamometers (force) and load cells (weight) strain gauges.
It is ideal to be used in the most innovative static and dynamic measurement systems such as material testing machines, printing machines, test benches and automation.
Thanks to its ??0,02% accuracy DFI can be used in quality systems as first or second line sample item if regularly calibrated by SIT centre.
The measurement system is made up of an analog section particularly stable at long term, of a carryng frequency feeder which lowers the system thermal drifts and of a 16 bit A/D converter which guarantees 65.000 internal divisions.
In order to increase the integration level of the components a traditional mixed tecnology and SMT has been adopted to make the indicator resistant to any kind of vibration and mechanical stresses besides granting the highest reliability of the circuit.
The internal batteries guarantee 1 year autonomy also thanks to the AUTO POWER OFF function which activates when any measurement change is detected within 30 minutes.
The indicator is equipped with a setting menu which allows to choose the most suitable type of engineering measurement units (kN, daN, lbs, t, kg), the resolution and the digital filter according to the measurement to be calculated.
The display also shows a bar analog indication which is operating inside the setting menu too.
When the instrument is working in compression mode, SP1 icon is alight; when it is working in tension mode, SP2 icon is alight.
Main characteristics:
• PROGRAMMABLE RESOLUTION
• PROGRAMMABLE DIGITAL FILTER
• PROGRAMMABLE BAUD RATE
• ZERO FUNCTION
• PEAK FUNCTION (positive and negative)
• RS232C SERIAL OUTPUT (on request)
• DIGITAL FILTER ALLOWS TO AVERAGE UNSTEADY or PULSATING FORCE.
Main Specifications:
BATTERY LIFE:1YEAR(200HRS)
Shown:Actual Size
Total Length 7.5”
Sensor Thickness:11/16”
Range for Nominal Load : 0 to 4.500lbs and 0 to 9,lbs
Resolution: 0.01
Accuracy Class:less than +/-0.5%
Linearity:less than +/-.20%FS
Hysteresis: less than +/-.20%FS
Repeatability:less than +/-.05%FS
Readings per sec.(0 filter):10(100ms)
Display:Custom LCD(H=5/8“
Mechanical Limit:
Service Load:120%FS
Max Permissible Load:150%FS
Breaking Load>300%FS
Displacement at Nominal Load:0.007“
Introduction
Resistive spot welding (RSW) is a process in which contacting metal surfaces are joined by the heat obtained from resistance to electric current.
Work-pieces are held together under pressure exerted by electrodes. Typically the sheets are in the 0.5 to 3 mm (0.020 to 0.118 in) thickness range. The process uses two shaped copper alloy electrodes to concentrate welding current into a small "spot" and to simultaneously clamp the sheets together. Forcing a large current through the spot will melt the metal and form the weld. The attractive feature of spot welding is that a lot of energy can be delivered to the spot in a very short time (approximately 10–100 milliseconds). That permits the welding to occur without excessive heating of the remainder of the sheet.
Applications:
1. Mild steel sheet, stainless steel sheet, galvanized metal sheet spot welding.
2. Metal sheet fixing welding before continues rolling seam welding.
3. Welding fan guard (with proper designed fixing and driving system), welding metal art ware, stationery, cook ware.
4. With special made electrode, it can weld small mesh, birds cage, pets cage, condenser and similar work piece.
5. Weld connection parts, the hinge, nuts and bolt welding, low carbon fasteners and stainless fasteners.
6. Welding high conductive material, like aluminum, electrical contact, copper wire etc.(using Middle frequency power)
Our machine features
1. Manufactured in accordance with international ISO Standard.
2. European CCC, ISO,CE Certified
3. European imported Microprocessor Welding Control has transparent safety cover to protect a keypad and has a lock to allow only authorized personnel to access the program.
4. Welding Control maintains main parameters such as welding current; weld time, off time, etc. with digital accuracy.
5. Any of 23 weld schedules can be easily selected for work.
6. Solid machine structure allows you carry out the Projection and spot welding work.
7. Improved water-cooling system guarantees flawless performance in heavy-duty applications.
8. Machine is painted with Lead-Free paint.
9. All materials used in design are environmentally friendly.
Machine quality warranty:
1. Provide one year oversea maintenance support.
2. Lifelong free technical support
leading time: 15 days after order.
3580 Welded Wire Mesh Suppliers
Short on time? Let Welded Wire Mesh sellers contact you.
This machine is made to gain a beautiful linear seam on circumferential shape tank, rectangular shape tank, or butt welding two pieces of metal sheet
Watch the video of the linear seam welding machine:
Https://youtu.Be/s32daltsp4w
Https://youtu.Be/3t_3ch_yu60
? Automatic argon arc(plasma) straight seam welding machine mainly includes two parts: specially designed straight seam automatic machinery part and standard welding source part
? According to different welding requirement of various materials, the automatic straight seam machinery part can be designed into two kinds: plate type pressing mechanism and keyboard type copper pressing mechanism, to get the regular and stable clamping and cooling effect.
? Standard welding source part includes tig(tungsten inert gas shielded arc welding), mig(metal inert gas shielded arc welding) mag(metal active gas arc welding) saw(submerged arc welding)paw(plasma arc welding), etc, automatic machinery part can be equipped by the standard welding source manufactured by our company , can also work with other well-known brands of welding power
? Automatic machinery part is adopted plc control, dc motor drive has variable welding speed and interfaces with any power source.
? Weld seam back up design has a groove to form a weld on the bottom of a welded plate and provide consistent gas flow to the back of the weld, to assure the stable gas shield and ensure double-side forming in single side welding.
? Automatic straight seam welding machine is mainly used for the high quality and low distortion automatic straight welding, such as metallic cylinders and aligned plates made with stainless steel, iron, aluminium and brass, etc.
? Compared with the traditional manual welding way , high welding efficiency and speed, well welding quality and good consistency
918-b-1 scrap cable stripping machine
This machine is suitable for a wide range of use, long life, can strip all kinds of cables, high voltage cables, cable wires, rolling wheel can be pressed more than 2mm single wire, sheath flat wire, wire and so on. Electromechanical configuration 4 × 4 three-phase. Gearbox adjustable fourth gear, speed suitable for your production needs. (note: the shift position, first a handle to neutral, then the other one, and so on.
Machine working video: https://vimeo.Com/184658547
The machine is equipped with two cable entry hole, two pressure hole. There are four blades
Voltage power: 380v,
Power: 5.5kw
Volume: length 900 × width 580 × height 1200
Weight: 250kg
Daily output: 1000-3000kg / day
Stripping cable diameter: dia 10mm- dia 165mm
Available wire: usb cable, power cord, headset cord, audio cable
One year warranty, lifetime maintenance
Feature of mute high speed wire stripping terminating machine
High speed: every 0.2 seconds terminating speed
Working method: foot pedal, motor work. Computerized control.
Very easy to change die., energy saving
Stripping and terminating can be finalized at the same time.
Description of mute high speed wire stripping terminating machine
This cable lug terminal crimping machine(benchtop crimping press) adopts high-tech inverter technology, electronic precision positioning, avoids traditional terminal crimping machine clutch electromagnet common failure.
Characteristic description
V power saving environmental protection, motor runs when machine is working.
V machine mould continuum, no need to change mould, quick save time.
V voltage stability, speed, high accuracy.
V suitable for crimping computer terminal, dc terminal, single grain terminal, joint terminal.
V light and handy structure, easy moving workplace, mute operation.
Specifications
Model no.
Ll-1.0t
Ll-1.5t
Ll-2.0t
Ll-3.0t
Ll-4.0t
Maxpressure
1 ton
1.5ton
2.0ton
3.0ton
4.0ton
Mold type
Fixed mold
Otp mold, #2000 mold, jst mold etc
Power supply
220v/50hz
Air pressure
Full electric, no need air compressor
Power rating
250w
550w
750w
1000w
1500w
Net weight
25kg
35kg
50kg
55kg
75kg
Size (mm)
250x210x460
280x250x600
320x280x650
320x280x660
350x320x720
The clamp of idc connector crimping machine is adjustable, there are two kinds of specifications, the one with 1.0 maximum spacing can crimp 64p, the one with 1.27 maximum spacing can crimp 50p, 1.0 or 1.27 spacing fixture will be sent with machine at ramdon, if two specifications of fixtures both needed, pay usd100 in addition.
Characteristic description:
1 for the 8p-64p idc connector crimping machine take place of hand pliers, output of high efficiency, stable quality and simple operation.
2 minimum gas consumption, low failure rate, easy maintenance.
3 with bakelite base use, simple operation, abrasion resistance, high precision.
4 suitable for crimping cable with idc products.
5 automatic crimping the product which is feeded in, finalization and the cylinder reset, easy to operate.
6 according to the product type can be pressed 300-600 times per hour.
7 addopt 6-8kg pressure, 220v power supply
8 the body all the use of steel for operation, solid and durable, external chrome, beautiful without rust
9 distribution a set of bakelite crimping adjustable block 8-40p (oem is acceptable.)
Technical parameters:
Model no.: fshs-50
Voltage ac220v
Weight 14kg
Appearance size 250x200x330mm
Press p number 4-40p a fixture /40-64p a fixture
Available in 220v/60hz or 110v/50hz power.
Motor: 60 watts.
Compact easy relocate
Features:
•apply to general modular cord plug or uk type plug
•a quiet and highly reliable direct motor drive
•easy to setup, operation
•interchangeable tooling for different plugs
Size:260*300*780mm(l*w*h)
Weight:80kg
Power source: single phase 220vac/ 50/60hz, 10a
Total power:550w
Cylinder pressure:0.4-0.7mpa(adjustable)
Working efficiency: 12000 crimps/hour(cauculated as 12pins above ribbon cable)
Appropriate wire: 0.8-2.0mm, awg20-28,
Red blue white fbc(2468), grey fbc(2651), color fbc and etc 2-40pins
Cutting length:>70mm
Ribbon cable split length: 30mm
Crimping strength: 1.5t
This semi-automatic wire splice machine is specially designed for wire riveting processing, pressing riveting and wire connection. It has replaced the traditional soldering methods to avoid faults of no cold welding, air welding and air pollution. It is widely admitted to be the most simple and effective way.
This wire splicing machine uses special continuous copper strip terminal materials to shape moulding after being cut off. Pressing quickly at one time without waste and saving cost.
The brass strip terminal is processed by residue lines. Resistance to tension is particularly strong after riveting with stable quality.
Straight and curved mold bases can be equipped to connect with various products.
User-friendly design, easy to operate.
Scope of application:
Neon and resistor connection, led and wire connections.
Resistor and wire connection.
Slide switch and wire connection.
Connection of high temperature heating elements.
Connection of thermosensitive components (such as magnetic spring, constant temperature fuse).
Transformer tap and wire connection.
Model no.: 1.8t semi-automatic wire splicing machine
Power supply: ac110v/220v 50hz
Weight: 55 kg
Dimension (mm): 370* 400*500
Power: 1/4hp
Stroke: 2000kg
Cooper belt size: 2mm/4mm/6mm
This fully automatic cable winding and wire binding machine is equipped with step motors, adopted plc touch screen to control cable tie length, automatic cut the cable tie and twist it. The winding speed and winding cycle are both adjustable. This machine is widely used to process ac/dc power cord, usb data cable, video cable, hdmi cable, and other types of transmission line.
Model no.
Tq5-30
Tq 15-45
Applicable nylon tie binding length
65-140 mm
110-190 mm
Binding diameter
5-30 mm
15-45 mm
Binding speed
1 second per binding
Winding spacing
50-200 mm
50-250 mm
Winding speed
1-10 circles (adjustable)
Working voltage
Ac220 50/60hz
Power
Product features:
1. Automatic plc touch screen control circuit, the operation is simple and convenient, good working stability.
2. Bulk nylon cable tie achieves automatic feeding, replacing the tedious process of manual discharge.
3. Automatic wearing lock and bundling, automatically cut the tie, approx 1500 wires per hour
(depending on the product to capacity), saves time and labor, improve several times the work efficiency.
4. Degree of tightness is adjusted by digital touch screen.
5. Leaving length of tie tail is adjusted by digital touch screen.
6. No pneumatic.
Technical parameters
Mode
Bj-60
Bj-80
Bj-100
Bj-120
Bj-150
Power supply voltage
Ac220v
Power frequency
50/60hz
Rated power
100w
Applicable scope
60mm
80mm
100mm
120mm
150mm
Body size
1230x550x800mm
Body weight
150kg
This wire splicing machine is specialized and designed for the processing of wire riveting, crimping and riveting,
Connecting wire, solder to replace the traditional way, without the disadvantages of cold welding,
Air welding and air pollution, it is the simplest and effective way to pass a variety of safety tests (ul, jis ).
User-friendly design, easy operation.It adopts an inverter motor that assure noise-free working environment.
Specifications:
Brass strip size:1.0mm/1.5mm/2mm/4mm/6mm (diffirent mould decides diffirent brass strip size)
Pressure:10kn
Output: 200 pieces per minute
Power supply:220v/50hz
Power rating: 1/4hp
Net weight: 55kg
Dimension: 370x350x470mm
Applications:
1) neon and resistor connection, led and wire connections.
2) resistor lead and wire connection
3) slide switch and wire connection
4) connection of high temperature heating elements
5) connection of thermosensitive components (such as magnetic spring, constant temperature fuse)
6) transformer tap and wire connection.
1. Product information:
Item name: BINZEL type 15AK MIG welding torches/CO2 welding gun
Size: 3m/4m/5m/6m
Rating: 180A CO2; 150A mixed gases
Meterial: copper/ brass/ steel/ plastic/ fiber etc
Weight: about 2.4kg
Founction: Our products are applicable to shipbuilding, automobile manufacture, industrial production and other situations where need welding operation.
2. Our service:
• Your inquiry will be replied within 24 hours.
• Well-trained & experienced sales can reply your inquiries in English.
• OEM & ODM projects are highly welcomed.
• Your business relationship with us will be confidential to any third party.
• Good after-sale service.
3. Our Advantage :
1. We have our own factory, so our price is competitive.
2. We have special research and development team; we can supply the newest goods to customers
3. We have strict test and quality control system, we can guarantee good quality.
4. We have eight production lines; we can guarantee in-time delivery.
4. MAIN PRODUCTS:
MIG/CO2/TIG/Plasma/Argon Welding Torches and Accessories:
1. Binzel 15AK,24KD,25AK,36KD,40KD Air Cooling Torch ,501D Water Cooling Welding Torch
2. Panasonic 180A,200A,350A,500A Welding Torch
3. OTC 180A,200A,350A,500A Welding Torch
4. PSF / ESAB 205A,305A,405A,505A Welding Torch
5. Trafimet 15AK,24KD,25AK,36KD Welding Torch
6. TBI 15AK,24KD,25AK,36KD Welding Torch
7. KR 180A,200A,350A,500A Welding Torch
8. P80,AG60,PT31,SG51,SG53,JG60,JG100,SG55,AG100,TZ100,A141,A101 Plasma Cutting Welding Torch
9. TIG welding Torches: WP9/WP12/WP17/WP18/WP26/WP20/WP27 Air/Water Cooling Torch
10. MIG/CO2 Welding Parts : contact tip , tip holder, swan neck, welding nozzle, gas diffuser, welding liner, Teflon liner, cable plug , euro connector, Panasonic connector, OTC connector, insulator, feed roller, protective paste, wire feeder, wire feeder motor,
11. TIG /Argon Welding & Cutting Parts: electrode tip & nozzle, welding collect, collect body, gas lens, ceramic nozzle, long cap, short cap
12. Electrode Holder, Earth Clamp, Welding Wires, Cable Connectors
5. Special Requests:
1. We can print your LOGO on products or packages.
2. High quality and competitive price and new fashioned design.
3. We can manufacture the products according to your requirements.
4. We can supply various of torches and we are professional.
5. Above is only for reference, we can make customized products.
6. Any suggestion, advice or inquiry is highly appreciated
