Polyaspartic Tiles Waterproofing Varnish DESCRIPTION PF600 is solvent free,two-component, hand applied, Polyaspartic clear coating. APPLICATION PF600 is used in kitchen, toilet and shower room waterproofing applications. FEATURES AND BENEFITS Fully bonded to the tile surface Low odor Excellent anti-slip property Cures fast,ready for use after 8-12 hours Convenient application Visible waterproofing
4 INCH frp membrane housings W40S300 Winder frp membrane housing pressure vessels 4" Side Entry Design Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating Accommodates standard make 4" Membrane Element Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Specification Winder frp membrane housing pressure vessels 4" Side Entry Design Available in 300 psi, 450Psi, 600Psi, 1000Psi, 1200Psi, pressure rating Accommodates standard make 4" Membrane Element Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88 MPa) Operating pH Range: 3 - 11 Cleaning pH Range: 2 - 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request
FRP MEMBRANE HOUSINGS R80S300 - ALUMINIUM CAP Side Entry Design Available in 300-600 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) FRP MEMBRANE HOUSINGS Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ISO9001, ISO14001, UL/NSF Rohone aluminium cap frp membrane housing pressure vessels 8 INCH frp membrane housing price Side Entry Design Available in 300-600 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ISO9001, ISO14001, UL/NSF 8 INCH frp membrane housings Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88MPa) Operating pH Range: 3 11 Cleaning pH Range: 2 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME un-Coded economy series or saving ro systems cost
FRP MEMBRANE HOUSINGS W80S1800 Winder frp membrane housing pressure vessels Side Entry Design Available in 1800 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40 x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Specification Winder frp membrane housing pressure vessels industrial frp membrane housings Side Entry Design Available in 1800 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40 x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF 8 INCH frp filter housings Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88 MPa) Operating pH Range: 3 - 11 Cleaning pH Range: 2 - 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request
Winder frp membrane housing pressure vessels End Entry Design Available in 150psi, 300psi, 450psi, 600psi, 1000psi, 1200psi pressure rating Accommodates standard make 8" Membrane Element 8 Inch Side Entry frp filter housings Specification Winder frp membrane housing pressure vessels End Entry Design Available in 150psi, 300psi, 450psi, 600psi, 1000psi, 1200psi pressure rating Accommodates standard make 8" Membrane Element 8 Inch End Entry frp pressure vessels Key Features Operating Temp Range: -10°C ---49°C Test pressure Standard: 1.5x Design Pressure ASME: 1.1x Design Pressure Internal permeate port not to exceed 125PSI(0.88 MPa) Operating pH Range: 3 - 11 Cleaning pH Range: 2 - 12 (less than 30 minutes) Mirror inner wall and brightly surface. White color is as standard. Customized colors are also available. ASME Code stamp available upon request Please operate in accordance with User Guide 8 Inch End Entry frp filter housings Quality Assurance Hydro-static Leakage Test Pressure: Standard: 100% test, not sampling ? 100,000 times cycle test ? Burst test with 6 times of its operating pressure ? 100% QA test with 1.5x design hydraulic pressure. ASME: 1.1x Design Pressure ? 100% QA inspection and cleaning before final packaging and delivery to customers. ? Submitted for NSF standard 61 Applications: Winder FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields. frp filter housings Notice: Please operate in accordance with User Guide! All information is subject to change without prior notice. Please contact us for the latest product information and specifications.
FRP MEMBRANE HOUSINGS R80S450 Side Entry Design Available in 300-600 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Specification Rohone aluminium cap frp membrane housing pressure vessels Side Entry Design Available in 300-600 psi pressure rating Accommodates standard make 8" Membrane Element frp membrane housings Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF 8 INCH frp membrane housings Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88MPa) Operating pH Range: 3 11 Cleaning pH Range: 2 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME un-Coded series for saving cost of ro systems. Quality Assurance Hydro-static Leakage Test Pressure: 8 INCH frp filter housings Standard: 100% test, not sampling ? 100,000 times cycle test ? Burst test with 4 times of its operating pressure ? 100% QA test with 1.3x design hydraulic pressure. ASME: 1.1x Design Pressure ? 100% QA inspection and cleaning before final packaging and delivery to customers. ? Submitted for NSF standard 61 8 INCH frp ro membrane housings Applications: Rohone FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields. 8 INCH frp membrane housing price Notice: Please operate in accordance with User Guide! All information is subject to change without prior notice. Please contact us for the latest product information and specifications.
Side Entry Design Available in 600 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Specification Winder frp membrane housing pressure vessels Side Entry Design Available in 600 psi pressure rating 8 INCH frp membrane housings Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF 8 INCH frp membrane housings Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88 MPa) Operating pH Range: 3 11 Cleaning pH Range: 2 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request
FRP MEMBRANE HOUSINGS W80S1200 8 INCH frp filter housings Side Entry Design Available in 1200 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON,BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Specification Winder frp membrane housing pressure vessels Side Entry Design Available in 1200 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON,BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF 8 INCH frp membrane housings Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88 MPa) Operating pH Range: 3 11 Cleaning pH Range: 2 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request Quality Assurance Hydro-static Leakage Test Pressure: Standard: 100% test, not sampling ? 100,000 times cycle test ? Burst test with 6 times of its operating pressure ? 100% QA test with 1.5x design hydraulic pressure.
FRP MEMBRANE HOUSINGS W80S1500 Winder frp membrane housing pressure vessels Side Entry Design Available in 1500 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY ,CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF Specification Winder frp membrane housing pressure vessels Side Entry Design Available in 1500 psi pressure rating Accommodates standard make 8" Membrane Element Element length: 40" x (1-8) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY ,CSM, VONTRON, BDX, etc. Standard: ASME RP, CE, ISO9001, ISO14001, UL/NSF 8 INCH frp membrane housings Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88MPa) Operating pH Range: 3 11 Cleaning pH Range: 2 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME Code stamp available upon request 8 INCH frp membrane housing price Quality Assurance Hydro-static Leakage Test Pressure: Standard: 100% test, not sampling ? 100,000 times cycle test ? Burst test with 6 times of its operating pressure ? 100% QA test with 1.5x design hydraulic pressure. ASME: 1.1x Design Pressure ? 100% QA inspection and cleaning before final packaging and delivery to customers. ? Submitted for NSF standard 61 Applications: Winder FRP membrane housing pressure vessels are widely used for industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields.
It is made of PVC. Since it is manufactured as UV Beam Resistant, it is called â??Pond Typeâ?? Geomembrane. Because of UV additive, it is direct sun beam resistant for ages. That kind of Geoser PVC Geomembrane is comfortabely used without coating the surface of it. It is manufactured in gray, blue, yellow colours. Geoser PVC GEOMEMBRANES are manufactured in a width of 2,10m; standard lengths of 20m&25m; with thicknesses of 1,00mm & 1,20mm & 1,50mm & 2,00mm & 2,50mm & 3,00mm. When it is demanded, they are manufactured in optional lengths.
Polyethylene(PE) takes the name of ethylene which is in the form of monomer. With several methods of polymerization, Ethylene becomes Polyethylene. Geoser HDPE Geomembrane is a geosynthetic liner which is formed as a result of extrusion of high density polyethylene and shaped homogenously by calender system. It can be used in all projects where impermeability is required.
Made from PP(polypropylene) or PET(polyester) short fiber by non woven needle punched manufacturing process. Item: Short fiber needle punched non woven type. Description: Made from PP(polypropylene) or PET(polyester) short fiber by non woven needle punched manufacturing process, it has isolation, filtration, drainage, reinforcement, protection and maintenance etc. Function. Specification: 80g/m2-1500g/m2 1m-6m in roll width,the length as clients request Property: Good flexibility,resistant to corrosion,resistant to acids and alkalis,anti-oxidation Separation,filtration,drainage,reinforcement,protection,and maintenance function PP/PET Woven Geotextile Application: Water conservancy project and hydropower project Road paving,railway Airport and port River bank protection and tunnel Environmental protection etc. Our Folding Insect Screen and Aluminum Insect Screen, Fiberglass Mesh has been exported to multiple countries.
Thermoplastic polyolefin (TPO) rolls, which use advanced polymerization technology, combine the durability and weather resistance of ethylene - propylene (HP) rubber with the thermal weldability of polypropylene.The coil has long - term weather resistance and does not use plasticizer. Product Feature 1. Few auxiliary materials, convenient construction and good system integrity; 2. Excellent tensile, tear and puncture resistance; 3. No plasticizer, no plasticizer migration problem, excellent heat aging resistance and uv resistance, direct exposure, large thickness above the base, durable; 4. Hot air welding, high seam peeling strength (twice as high as PVC); 5. Fast welding speed; 6. Chlorine free and 100% recyclable, environmentally friendly; 7. Maintain excellent thermal welding performance for a long time, easy to repair; 8. Smooth surface, no fading, anti-pollution; Scope of application Widely used in industrial and civil and public buildings of all kinds of roofing waterproof works.
This kind of waterproof coiled material is made in the following way: base materials are firstly dipped into asphalt or thermoplastic elastomer (e.g. SBS), thermoplastics (e.g. APP or APAO) and modifiedasphalt; then both surfaces are coated with elastomer or plastic asphalt; fine sands and mineral grains (pieces) or polyethylene memb ranes are spread or covered on its upper surface; fine sands or polyethylene membranes are spread or covered on its lower surface. Product Feature * It has good waterproofing and ageing-resistance function; * Not flowing at highest temerature and no crack at lowest temperautre; * Easy application, no pullution; * Long service life; Matters need attention * no construction shall be allowed on rainy, snowy or windy days above grade 5; * construction site and personnel safety protection facilities are complete, fire fighting equipment is effective and placed according to regulations;
This waterproof membrane is of high elasticity with best performance among high polymer waterproof material, it's made of ternary ethylene-propylene rubber. It's use of the most advanced continues extrusion and vulcanization technology and related equipments which are specially designed for production of such product. Product Feature Good Anti-perforated; Convenient for dealing with details; Convenient maintenance, low cost; Convenient application, solid joint, no environment pollution; Excellent anti-aging performance, service life up to 50 years; Chemical corrosion resistance, can be used for special occasions; High extension rate, high tensile strength, small size changer at heat treatment; Good plant roots penetrability resistance and can be made waterproofing layer of planting roof; Good low temperature flexibility, and good performance of adapting to ambient temperature changes; Special modified molecular structure, effectively resolving the current domestic and foreign glue joint problem; Application / Models Widely used in roofs, basement, toilet, swimming pool, and all kinds of industry and civil building waterproofing, reservoir, bridge, underground, tunnel and dam waterproofing, especially to the keystone waterproofing projects which is durability, high corrosion resistance and easy deformation.
Plastomeric waterproofing cover with APP (Atactic polypropylene) spunbond polyester felt carrier on both sides polyethylene coated Usage areas Water and steam insulation of wet spaces. Terrace and sloping roofs. Pressurized groundwater problems. Retaining wall and basement walls. Rain gutters, balconies, flowerpots, concrete canal interiors and garden terraces, water tanks, ponds, sewage treatment plants, parking, hidden creek insulations Advantages It has high flexibility. It is based on building movements and expansion differences. Dilatation, chimney bottom, parapet return details such as easily applied. The building lasts its lifetime. It can be applied on different types of floors. It provides waterproofing regardless of the technical characteristics of the floor and receives only mechanical support from the underlying carrier. The amount of void in the concrete, cracks on the surface, dusting rate do not affect the waterproofing properties. It has high tensile-breaking strength thanks to polyester felt as carrier. It is based on building movements, subsequent cracks, and the amount of expansion of different materials in filters and parapets. No additional material is required for dilatations. The amount of use can be clearly determined before application. It is not affected by differences in outdoor weather conditions and chemical additives inside. Technical specifications are standard. Storage and Protection Rolls should be stored and transported vertically. It should not be exposed to ultraviolet rays and sudden changes in temperature. After application, no drilling and cutting operations should be performed. The terraces to be visited should be protected with floor covering. Method of Application With torch flame 10 cm at the joints, 15 cm at the roll ends. It is applied in full, dotted or free form as a share of one thousandth.
Stony Roof Covering Polymer bitumen, colored granule coated waterproofing membranes, waterproof of sloping roofs, Lightweight, economical and long lasting solutions.
Flame retardant waterproof membrane enhances the safety of the building.PANZHU WRAP flame retardant waterproof membrane is produced by the latest technology, with the function of self-extinguishing from the fire, which can effectively enhance the fire escape time for people and improve the building fire rating. Flame-retardant breathable membrane is also suitable for steel structure roof which needs electric welding operation. Fire Retardant Breather Membrane raise the level of building protection to a new standard. Based on the latest patented technology. Fire retardant breathable membrane can reduce the spread of fire more effectively and avoid causing more losses. When the flame meets the Fire Retardant Breather Membrane, it will stop advancing, slowly extinguished, until the flame disappears. The latest patented technology not only retains the excellent breathable performance, but also increases the flame retardant performance, which can not only effectively improve the energy-saving efficiency of building envelope, but also increase the safety of the building, thus making it the ideal protective layer of the building. Flame retardant breathable membrane Product features: Easy installation, Anti-aging, Long service life, Strong waterproof ability, the hydrostatic pressure can reach more than 2m, and has a unique function of vapor permeability. Flame retardant breathing membrane can discharge the water vapor inside the enclosure structure and ensure the thermal performance of the insulation layer in order to extend the service life of the building. Fire class: Class B1 which is equal to the CE standard Fire class E. Flame retardant house wrap Application: on the outer side of Curtain wall insulation, steel structure insulation, cladding insulation, prefabricated building insulation, Passive House insulation and slope roofs of many kinds. The roof breathable membrane is installed upon the roof insulation layer, which is suitable for slope roof with purlin or without purlin and roof system of steel structure. It has excellent waterproof performance and high strength. It can effectively reduce the risk of condensation phenomenon, air leakage and convection heat loss in order to protect the insulation layer perfectly.
Waterproof membrane uses the very latest technology of high quality microporous membrane.This material has many tiny holes which permits air vapor to get through but prevents water molecule to get through. Thus the performance of waterproof and breathable. Breathable membrane consists of three layers: Outer shelter layer, middle function layer and inner shelter layer. The two shelter layer keeps the membrane durable in every kind of using environment. House wrap advantages: Breathable membrane for roof air tightness:Correctly installed PANZHU WRAP can protect the house from strong wind and reduce the thermal bridge phenomenon in the inner house Breathable membrane for walls water tightness: Excellent waterproofing performance with 2 meters water column up and two hours water tightness Breathability : 1063g/ã?¡.24h or 68 US perm The house can breath freely with PANZHU WRAP and keep away the mold and rod. Durability: PANZHU breathable membrane has passed the national aging test.Tensile strength 232N/50mm.
Waterproofing membrane reflective can not only reflect the heat radiation from the roof, but also has the function of breathable. Reflective Waterproof Membrane adopts vacuum aluminum plating method to add a layer of aluminum foil on the surface of the waterproof membrane. On the one hand, Reflective Waterproof Membrane has the effect of heat reflection; on the other hand, the fireproof effect of the waterproof membrane can be improved; Third, the service life of the waterproof membrane is extended.Reflective Waterproof Membrane is suitable for any wall system that needs moisture protection.This low emissivity membrane is particularly effective in lightweight wall structures, such as timer frame or steel structure buildings, as well as masonry and internal insulation upgrades. In winter, the reflective breathing membrane can effectively block the diffusion of indoor heat radiation, reduce the loss of indoor heat and strengthen the thermal insulation effect of the building. In summer, reflective breathable membrane can play an excellent role in heat insulation.The reflective breathable membrane reflects the outdoor radiation, reduce the building's absorption of heat radiation so as to keep the indoor air cool and reduce the refrigeration energy consumption. Therefore, the reflective house wrap can be effectively applied no matter in what kind of insulation climate zone, with good thermal insulation, waterproof and vapor permeation effect and play a significant role on the building energy saving. Property Unit Value Detection method Mass per unit area g/m2 130 Thickness mm 0.3 Water vapour transmission (38°C, 90% humidity difference) g/m2.24h 1000 GB/T17146-2015 Water vapour transmission (us) perm 63 Water vapour transmission (ca) ng/Pa/s/m² 3591 Watertightness (According to domestic test method) 2 meters water column 1hours impermeable GB/T328.10-2007A (Without using indicator) Maximum tensile force (MD/CD) N/50mm 220/111 GB/T328.9-2007 Elongation (MD/CD) % 110/100 GB/T328.9-2007 Resistance to tearing MD/CD (nail shank) N 135/100 GB/T328.18-2007 Flexibility at low temperature(no crack) - 20 GB/T328.15-2007 Reaction to fire B1 GB/T5626-2007 Fire class (equal to EU standard) E Artificial ageing by UV and heat (80 Ã?168h)performance retention Tensile(MD/CD) 98%/87% GB/T3512-2014 GB/T328.9-2007 Elongation (MD/CD) 72%/72% Anti UV months More than 4 GB/T2291-2014 Minimum recommended pitch ° 20 Reflectivity % 70 ASTM E408 Emissivity % 20
