Properties:
DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210íµ) DTPMPA has better scale and corrosion inhibition effect than other organophosphines.
Specification:
items index
Appearance Brown transparent liquid
Active acid % 48.0-52.0
Phosphorous acid (as PO33-)% 3.0 max
Chloride (as Cl-)% 12-17
Density (20íµ) g/cm3 1.35-1.45
pH (1% solution) 2.0
Fe ppm 35 max
Usage:
DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially in alkali circulating cool water system without additional pH regulation, It can also be used in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used.
DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelementí»s carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.íí
Properties:
PBTCA has low content of phosphoric, has structural features of both phosphoric acid and carboxylic acid group, which enable its excellent scale and corrosion inhibition properties. Its antiscale property under high temperature is far better than that of organophosphines. It can improve zinc salt solubility, has good chlorine oxidation tolerance and good composite synergy.
Specification:
items index
Appearance Colorless or light yellow transparent liquid
Active acid % 50.0 min
Phosphorous acid(as PO33-)% 0.8 max
Phosphorous acid(as PO43-)% 0.5 max
Density (20íµ) g/cm3 1.27 min
pH(1% solution) 1.5~2.0
Usage:
PTBCA is a high efficient agent as scale and corrosion inhibitor. It is the excellent stabilizer for zinc salt. It is widely used in circulating cool water system and oilfield refill water system as scale and corrosion inhibitor, suitable to composite with zinc salt and copolymer. It can be used in situations of high temperature, high hardness, high alkali and high concentration index. In lavation fields, it is used as chelating agent and metal detergent.
PBTCA is usually used together with zinc salt, copolymer, organophosphine, imidazole and other Water Treatment Chemicals. When used alone, the dosage of 5-15mg/L is preferred.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Structural Formula:Properties:
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition.
ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent.
The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent.
Specification:
items index
Appearance colorless or light yellow transparent liquid White crystal powder
Active acid % 48.0-52.0 95min
Chloride (as Cl-)% 2.0(or1.0) min 1.0 min
pH value (1úÑsolution) 2.0 max 2.0 max
Fe (as Fe3+) (ppm) 20 20
Density (20íµ)g/cm3 1.33 min -
Colour APHA (Hazen) 40 max -
Usage:
ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred.
Package and Storage:
ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Properties:
HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn ions to form stable chelating compounds.It can dissolve the oxidized materials on these metalsí» surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250íµ. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects.
The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals.
Specification:
items index
Appearance Colorless or light yellow transparent liquid White crystal powder
Active content (HEDP)% 58.0-62.0 89.0 min
Phosphorous acid (as PO33-)% 2.0 max 0.5 max
Phosphoric acid (asPO43- )% 0.8 max 0.5 max
Chloride (as Cl-)% 0.01 max 0.01 max
pH (1úÑ solution) 2 max 2 max
Density (20íµ)g/cm3 1.40 -
Fe ion ppm 10 max 20 max
Colour APHA (Hazen) 40 max -
Usage:
HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid.
Package and Storage:
HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Safety Protection:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.íí
Properties:
EDTMPA is white crystal powder at room temperature, with melting point 215-217íµ, hard to be dissolved in water, the solubility is less that 5% at room temperature, easy dissolved in ammonia. EDTMPA has strong metal ion chelating capacity, whose chelating constant with cuprum ion is larger than that of EDTA.
EDTMPA has high capacity for chelating metal ions. The complex constant with Cu is the largest in all chelating agents including EDTA. EDTMPA is a kind of high-pure grade reagent and innocuous, it can be used as detergent in semiconductor chip to prepare integrated circuit, as carrying agent for radioelement in medical industry, and as agent for inspection and therapy. The chelating capacity of EDTMPA largely exceed that of EDTA and DTPA, and can replace EDTA for chelating agent at almost any situation.
Specification:
items index
Appearance White crystal powder
Active acid % 95.0min
Total phosphonic acid(as PO43-)% 82.0 min
Dryness weight loss % 2.0 max
Fe ppm 5 max
Cl % 0.1 max
pH(1% solution) 2.0 max
Our company can produce 99% (chromatograph purity) and high purity product on demand of clients.
Package and Storage:
25kg inner liner polyethylene (PE) bag, outer plastic woven bag, with agreement with export environment requirement, or confirmed by clients. Storage for one year in room shady and dry place.
2455 Water Treatment Chemicals Suppliers
Short on time? Let Water Treatment Chemicals sellers contact you.
Properties:HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330f¦. HPMA has obvious threshold effect under high temperature (350f¦) and high pH(8.3)level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300f¦ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement.
Specification:
items& index
Appearance Clear to umber transparent liquid
Solid content %: 48.0 min
Bromine value mg/g: 80.0 max
Average molecular weight: 450 min
pH(1% solution): 2.0-3.0
Density (20f¦)g/cm3: 1.18 min
Usage:
HPMA is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. HPMA has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion.
Normally In 250kg net Plastic Drum, IBC drum can also be used as required
Properties:MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300f¦). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields.
Specification:
items: Water treatment agent Accessory detergent
Appearance; Clear brown liquid amber transparent liquid
Solid content %: 48 min& 50 min
Free monomer (MA) %: 9.0 max& 5.0 max
Density (20f¦)g/cm3: 1.18 min& 1.18min
pH(1% solution): 2.0~3.0 &2.0f+1.0
Usage:
MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments.
Normally In 250kg net Plastic Drum, IBC drum can also be used as required
Properties:
AA/AMPS is the copolymer of acrylic acid and 2-acrylanmido-2-methylpropanesulfonic acid (AMPS). Due to including carboxylic group (scale inhibition and dispersion) and sulfonic acid group (strong polarity) in this copolymer, AA/AMPS has high calcium tolerance and good scale inhibition for calcium phosphate, calcium carbonate and zinc scale. When built with organophosphines, the synergic effect is obvious. AA/AMPS is suitable to be used in water quality of high pH and high alkaline, it is one of the ideal scale inhibitor and dispersant on high concentration index.
Specification:
items& index
Appearance: Colorless or light yellow viscous liquid
Solid content %: 40 min
Free monomer (as AA)%: 0.8 max
Density (20f¦)g/cm3: 1.15 min
pH(1% solution): 3.5-4.5
Viscosity mpa.s: 90-200
Usage:
AA/AMPS can be used as scale inhibitor and dispersant in open circulating cool water system, oilfield refill water system, metallurgy system and iron & steel plants to prevent sediment of ferric oxide. When built with organophosphorines and zinc salt, the suitable pH value is 7.0~9.5.
AA/AMPS can also be used as dyeing auxiliaries for textile.
Normally In 250kg net Plastic Drum, IBC drum can also be used as required
Properties:
T-225 is copolymer of polyacrylic acid and hydroxypropyl acrylate, it has good scale inhibition and dispersion properties to calcium phosphate and calcium carbonate, it has good dispersion properties to ferric oxide sludge, clay and grease. T-225can be used under high pH situation and has good compatibility with other organophosphines and BTA, T-225 can effectively withhold sediments of zinc salt and calcium phosphate, it has good scale inhibition and dispersion properties under high temperature and alkaline situations.
Specification:
items index
Neutro Acid
Appearance Colorless to light yellow viscous liquid
Solid content % 30.0 min 30.0 min
Free monomer (as AA )% 0.5 max 0.5 max
pH(1% solution) 7.5f+1.0 2.5f+0.5
Limiting viscosity number (30f¦) dl/g 0.060~0.095
Density (20f¦)g/cm3 1.10 min
40%, 50% PAA are also supplied.
Usage:
T-225 can be used in circulating cool water system in situation of alkaline and excess of phosphate. It can be used as scale inhibitor and dispersant for heater, none-column evaporator boiler, circulating cool water and oilfield dirty refilling water with high calcium content. The dosage of 10~30mg/L is preferred. It can be built with organophosphines to form full organic alkaline formula.
Normally In 200kg net Plastic Drum, IBC drum can also be used as required
Appearance: Colorless or light yellow transparent liquid
Solid content % : 30 min
Free monomer (CH2=CH-COOH) % :0.5 max
Density (20íµ)g/cm3: 1.09 min
pH(1% solution) :3.0 max
40%, 50% PAA are also supplied.
Normally In 200kg net Plastic Drum, IBC drum can also be used as required
Appearance: Colorless or light yellow transparent liquid
Solid content % :30 min
Free monomer (CH2=CH-COOH) % :0.5 max
Density (20íµ)g/cm3 :1.15 min
pH(1% solution) :6.0~8.0
Appearance: Clear to umber transparent liquid
Solid content % :48.0 min
Bromine value mg/g :80.0 max
Average molecular weight :450 min
pH(1% solution): 2.0-3.0
Density (20íµ)g/cm3: 1.18 min
Normally In 250kg net Plastic Drum, IBC drum can also be used as required
Appearance ;colorless or light yellow transparent liquid White crystal powder
Active acid % :48.0-52.0 95min
Chloride (as Cl-)% :2.0(or1.0) min ;1.0 min
pH value (1úÑsolution): 2.0 max ;2.0 max
Fe (as Fe3+) (ppm) :20; 20
Density (20íµ)g/cm3 : 1.33 min -
Colour APHA (Hazen) :40 max -
ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Appearance: Colorless or light yellow transparent liquid ;White crystal powder
Active content (HEDP)% : 58.0-62.0; 89.0 min
Phosphorous acid (as PO33-)% :2.0 max ;0.5 max
Phosphoric acid (asPO43- )%: 0.8 max ;0.5 max
Chloride (as Cl-)% :0.01 max ;0.01 max
pH (1úÑ solution) :2 max ;2 max
Density (20íµ)g/cm3 :1.40 -
Fe ion ppm : 10 max; 20 max
Colour APHA (Hazen): 40 max -
HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Cas 26677-99-6
Properties:
Ma/aa is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. It has good thermal stability, can be used under high temperature (300ª). Ma/aa has good compatibility when used together with other agents. Ma/aa is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields.
Specification:
Items water treatment agent accessory detergent
Appearance clear brown liquid amber transparent liquid
Solid content % 48 min 50 min
Free monomer (ma) % 9.0 max 5.0 max
Density (20ª)g/cm3 1.18 min 1.18min
Ph(1% solution) 2.0~3.0 2.0a1.0
Usage:
Ma/aa is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. Ma/aa can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/l is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments.
Package :
Normally in 250kg net plastic drum, ibc drum can also be used as required.
Properties:
Through the introduction of phosphonic group into carboxylic group, copolymer of phosphono and carboxylic acid (pca) has good dispersion property for scale of calcium carbonate and calcium phosphate in circulating cool water system. It has good scale inhibition for barium sulfate, strontium sulfate and silica scale. Pca has advantages in wide range of water quality, chemical stability, strong chlorine tolerance, etc. Pca can be used as scale and corrosion inhibitor in circulating cool water system and oilfield refill water system.
Specification:
Items index
Appearance colorless or light yellow liquid
Solid content % 50.0 min
Total phosphor (as po43-)% 0.5 min
Density (20fª)g/cm3 1.20-1.30
Ph(1% water solution) 3.0-4.0
Usage:
When used alone, the dosage of 5-20mg/l is preferred. It can also be used together with organophosphines, copolymer, zinc salt or bta.
Package :
Normally in 250kg net plastic drum, ibc drum can also be used as required.
Properties:
Is a good scale inhibitor and dispersant for cool water treatment, it has good inhibition for dry or hydrated ferric oxide. Th-3100 is a all organic dispersant and scale inhibitor, it can be also used as stabilizer of corrosion inhibitor for phosphate and phosphinic salt. (similiar to rohmhaas acumer 3100)
Specification:
Items index
Appearance light amber liquid
Solid content % 43.0-44.0
Density (20fª)g/cm3 1.20 min
Ph(1% water solution) 2.1-2.6
Usage:
Th-3100 can be used as scale inhibitor for circulating cool water and boiler water, for phosphate, zinc ion and ferric in particular. When used alone, the dosage of 10-30mg/l is preferred. When used in other fields, the dosage should be determined by experiment.
Package :
Normally in 250kg net plastic drum, ibc drum can also be used as required.
2455 Water Treatment Chemicals Suppliers
Short on time? Let Water Treatment Chemicals sellers contact you.
