1. It is high-performance detergent auxiliary for every detergents .
2. Excellence chelated ability and dispersion ability; it has good cooperated ability to zeolite.
3. Excellence ph buffer ability, reduce the thrill to the skin.
4. The addition is 0.8%-0.15% in washing powder formula.
5. Ma/aa-cp5 (acrylic acid / maleic acid =7ú¦3 copolymer) is equal to basf sokalan cp5.
Hpma is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330íµ. Hpma has obvious threshold effect under high temperature (350íµ) and high phú¿8.3ú¬level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300íµ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, hpma is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, hpma has good corrosion inhibition effect when used together with zinc salt.
Hpma can also used as additives for cement.
Hpma is usually used together with organic phosphonate at dosage of 1-15ppm for circulating cool water system, oilfield fill water, crude oil dewatering and low-pressure boilers. Hpma has good scale inhibition (98%) and scale stripping properties. When used together with zinc salts, it can effectively inhibit carbon steel corrosion.
Normally in 250kg net plastic drum, ibc drum can also be used as required.Storage for one year in room shady and dry place.
Properties:
HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn ions to form stable chelating compounds.It can dissolve the oxidized materials on these metalsí» surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250íµ. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDPhas good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects.
The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals.
HEDPliquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required HEDPsolid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Prophylaxis is the manufacturer of stable chlorine dioxide in liquid form with purity 99%, strength 0.76% = 7600 ppm. And generates no harmful by products.
Our product is highly effective for the inhibition of all type of microorganism, including bacteria and viruses as well. It also removes algae and bio film effectively.
Properties and usage:
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition.
ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent.
The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent.
Specification:
items index
Appearance Colorless or pale yellow transparent liquid White crystal powder
Active acid % 48.0-52.0 95min
Chloride (as Cl-)% 2.0(or1.0)max 1.0max
pH ú¿1úÑ solutionú¬ 2.0max 2.0max
Feú¼mg/L 20.0max 20.0max
Density ú¿20íµú¬g/cm3 1.33min í¬
Colour APHA (Hazen) 40max .
Usage:
ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred.
Package and Storage:
ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required
ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Safety Protection:Acidity, Avoid contact with eye and skin, once contacted, flush with water.
ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required
ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Properties:
HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn ions to form stable chelating compounds.It can dissolve the oxidized materials on these metalsí» surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250íµ. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects.
The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals.
Specification:
items index
Appearance Colorless or light yellow transparent liquid White crystal powder
Active contentú¿HEDPú¬úÑ 58.0-62.0 90.0min
Phosphorous acidú¿as PO33-ú¬% 2.0max 0.5max
Phosphoric acid ú¿as PO43 ú¬% 0.8max 0.5max
Chloride (as Cl-)% 0.01max 0.01max
pHú¿1úÑ solutionú¬ 2max 2max
Density ú¿20íµú¬g/cm3 1.40 í¬
Feú¼mg/L 10max 5max
Colour APHA (Hazen) 40max.
Usage:
HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid.
Package and Storage:
HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required
HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag,, or confirmed by clients.
Storage for ten months in room shady and dry place.
Safety Protection:Acidity, Avoid contact with eye and skin, once contacted, flush with water.
HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required
HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag,, or confirmed by clients.
Storage for ten months in room shady and dry place.
Polyacrylamide is called as PAM for short and it is polymerized by the acrylamide monomer. PAM is a kind of linear water-soluble polymer matter. With different techniques and functional groups, products with different types of charge can be obtained, including the anionic polyacrylamide (APAM), cationic polyacrylamide (CPAM), non polyacrylamide (NPAM) and amphoteric polyacrylamide (ACPAM). The average molecular weight of PAM ranges from thousands to millions and it is the high-molecular electrolyte. It is the white power or granule, and it can be dissolved in the water easily but not the common organic solvents including the benzene, ether, ester, acetone, etc.. The aqueous solution of polyacrylamide is the thick liquid, and it is non-toxic and non-corrosive. The solid PAM is hygroscopic, and the hygroscopicity is improved with the increasing of ionic degree.
Use characteristics
1) Flocculability: The PAM plays the role of flocculation for the suspended matter through electrical neutralization, bridging and adsorption.
2) Adhesivity: It has the adhesive effect based on the mechanical, physical and chemical role.
3) Resistance reducing: PAM can effectively reduce the frictional resistance of fluid, and adding a minute amount of PAM into water can reduce the resistance by 50-80%.
4) Thickening: PAM has the effect of thickening both under the neutral and acid conditions. When the pH is greater than 10, PAM can have the easy hydrolysis. Besides, the effect of thickening will be more obvious when the PAM has the semi-mesh structure.
Anionic Polyacrylamide: It is the white powder. The APAM with the molecular weight of 4,000,000-26,000,000 has good water solubility, and it can be dissolved in water by arbitrary proportion but not in organic solvents. It has the characteristics of high-polymer electrolyte in the neutral and alkaline medium, and it is sensitive to the electrolyte salt. And it can be cross-linked into insoluble gel with the high valence metal ions.
Use: (1) Industrial waste water treatment:
For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc..
(2) Drinking water treatment:
When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter.
(3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory.
(4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery.
(5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making.
ATMP Liquit
Appearance: colorless or light yellow transparent liquid
Active acid %: 48.0-52.0
Chloride (as Cl-)%: 2.0(or1.0) min
pH value (1%solution): 2.0 max
Fe (as Fe3+) (ppm): 20
Density (20C)g/cm3: 1.33 min
Colour APHA (Hazen): 40 max
ATMP Solid:
Appearance: White crystal powder
Active acid %: 95min
Chloride (as Cl-)%: 1.0 min
pH value (1% solution): 2.0 max
Fe (as Fe3+) (ppm): 20
Density (20f+)g/cm3
Colour APHA (Hazen).
Properties of MA/AA:
MA/AA is a low molecular weight polyelectrolyte, a copolymer of maleic anhydride and acrylic acid. It has good dispersant performance against carbonate and scale inhibition for phosphate. it has good thermal stability, can be used under high temperature (300C). MA/AA has good compatibility when used together with other agents. MA/AA is widely used in low-pressure boiler, centralized heating, centralized air-conditioner and circulating cool system. It can also be used as chelating dispersants in woven and dyeing fields.
Specification of MA/AA:
Appearance Clear brown liquid Amber transparent liquid
Solid content % 48 min 50 min
Free monomer (MA) % 9.0 max 5.0 max
Density (20C)g/cm3 1.18 min 1.18min
pH(1% solution) 2.0~3.0 2.0+/-1.0
Usage of MA/AA:
MA/AA is used in circulating cool water system, medium or lower pressure boiler and distillation system in which high temperature is usually encountered. MA/AA can be used alone or together with other organic phosphates. When used together, the dosage of 2-10mg/L is preferred. The dosage for use as woven & dyeing and accessory detergent should be determined by experiments.
Package and Storage of MA/AA:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for one year in room shady and dry place.
Safety Protection of MA/AA:
Acidity, Avoid contact with eye and skin, once contacted, flush with water.
Properties
Benzalkonium Chloride is a kind of cationic surfactant, belonging to nonoxidizing boicide. 1227 can efficiently withhold algae propagation and sludge reproduction. Benzalkonium Chloride also has dispersing and penetrating properties, can penetrate and remove sludge and algae, has advantages of low toxicity, no toxicity accumulation, soluble in water, convenient in use, unaffected by water hardness. Benzalkonium Chloride can be also used as anti-mildew agent, antistatic agent, emulsifying agent and amendment agent in woven and dyeing fields.
Specification
Appearance
Colorless to pale yellow transparent liquid
Light yellow transparent liquid
Light yellow waxy solid
Solid content % 44.0 min 80 min88 min
Amine salt % 2.0 max 2.0 max2.0 max
pH(1% water solution)6.0~8.0(origin) 6.0-8.06.0-8.0
Usage:
As nonoxidizing boicide, dosage of 50-100mg/L is preferred; as sludge remover, 200-300mg/L is preferred, adequate organosilyl antifoaming agent should be added for this purpose. This product can be used together with other fungicidal such as isothiazolinones, glutaraldegyde, dithionitrile methane for synergism, but cannot be used together with chlorophenols. If sewage is appeared after thrown of this product in circulating cool water, the sewage should be filtered or blown off in time to prevent their deposit in bottom of collecting tank after froth disappearance.
No blending with anion surfactant.
Safety Protection:
A little smell of almond, no visible stimulation to skin. When contacted, flush with water.
Hedp is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, hedp is used as detergent for metal and nonmetal. In dyeing industry, hedp is used as peroxide stabilizer and dye-fixing agent; in non-cyanide electroplating, hedp is used as chelating agent. The dosage of 1-10mg/l is preferred as scale inhibitor, 10-50mg/l as corrosion inhibitor, and 1000-2000mg/l as detergent. Usually, hedp is used together with polycarboxylic acid.
Package and storage of HEDP:
Hedp liquid: normally in 250kg net plastic drum, ibc drum can also be used as required hedp solid: 25kg inner liner polyethylene (pe) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Properties:
PESA is a multivariate scale and corrosion inhibitor with non-phosphor and non-nitrogen, PESA has good scale inhibition and dispersion for calcium carbonate, calcium sulfate, calcium fluoride and silica scale, with effects better than that of ordinary organophosphines. When built with organophosphates, the synergism effects are obvious.
PESA has good biodegradation properties, PESA can be widely used in circulating cool water system in situation of high alkaline, high hardness and high pH value. PESA can be operated under high concentration index. PESA has good synergism with chlorine and other Water Treatment Chemicals.
Specification:
Appearance Colorless or amble transparent liquid
Solid content % 40.0 min
Density (20C)g/cm3 1.28 min
pH(1% water solution) 9.0-12.0
Usage:
PESA can be used in system of oilfield refill water, crude oil dehydration and boiler;
PESA can be used in circulating cool water system of steel, petrochemical, power plant, medicine.
PESA can be used in boiler water, circulating cool water, desalination plant, and membrane separation in situation of high alkaline, high hardness, high pH value and high concentration index.
PESA can be used in detergent fields.
Package and Storage:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Safety Protection:
Alkaline, Avoid contact with eye and skin, once contacted, flush with water.
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
2458 Water Treatment Chemicals Suppliers
Short on time? Let Water Treatment Chemicals sellers contact you.
