We can supply any quantity & certified super high grade quality of hydrated lime in 25kg, 40kg & jumbo packaging for the 400kgs also with short timelines. If you are seeking 86+, 90+ & 96+ (pharma grade), we can supply the same to you also. Our entire product lines are iso 9001 certified. Serious buyers please contact immediately. Assuring of our best services at all times. 25kg, 40kg, 700kg
CAS: 6419-19-8 Molecular Formula: N(CH2PO3H2)3C Molecular weight: 299.05 1, Properties and usage ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. in water system ,it can prevent scale formation, particularly for calcium carbonate. in water, ATMP has good chemical stability and is hard to be hydrolyzed. At high concentration, it has good corrosion inhibition. ATMP can be used in thermal power plant, recirculated cooling water of oil refinery, and recycle waterflood system of oilfield.. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, easily soluble in water, easy moisture absorption, particularly suitable for using in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. 2, Specification: ITEMS Index Appearance Colorless or light yellow transparent liquid Whitecrystal powder Active content (asATMP) % ¡Ý 50.0 50.0 92.0 Phosphorous acid (as PO33- )% 5.0 3.5 -- Phosphoric acid (as PO43- )% 1.0 0.8 0.8 pH (1% Water Solution) 1.5-2.5 1.5-2.5 ¡Ü2.0 Chloride (as CL- )% 3.5 2.0 2.0 Fe(as Fe3+) ppm ¡Ü -- 20.0 20.0 Density (20oC) g/cm3¡Ý 1.28 1.30. 3, Application range&using method:ATMP is usually used together with other organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The recommended dosage is 5-20mg/L. As corrosion inhibitor, The recommended dosage is 20-80mg/L. 4,Safety Protection:ATMP is Acidity, Avoid contact with eye and skin, once contacted, flush with water. Package and Storage:ATMP liquid: Normally In 30kg or 250kg net Plastic Drum;ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients request.Storage for ten months in room shady and dry place.
CAS :2809-21-4 Molecular Formula:C2H8O7P2 Molecular weight: 206.02 1, Properties HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn etc. metal ions and form stable complex compound. It can dissolve the oxidized materials on these metals'surfaces. Under250OC HEDP shows excellent scale and corrosion inhibition ability. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid of HEDP is high purity product, suitable for using in winter and freezing districts. it is quite suitable for using as cleaning agent in electronic fields and as additives in daily chemicals. 2, Specification: ITEMS Index Appearance Colorless or light yellow transparent liquid White crystal powder Active content (as HEDP) % ¡Ý 50.060.0 89.0 Phosphorous acid (as PO33-)%¡Ü 2.02.0 0.80 Phosphoric acid(asPO43- )% ¡Ü 0.80.8 0.50 Chloride (as Cl-)% ¡Ü 1.01.0 0.10 pH (1% solution) ¡Ü 22 2.0 Density(20OC)g/cm3 ¡Ý 1.341.40 ¡ª¡ª Fe ion ppm ¡Ü 10 10 5.0. 3,HEDP Application range&using method HEDP is widely used in the in circulating cool water system of electric power, chemical industry, metallurgy, fertilizer, etc. and widely used as a scale and corrosion inhibitor of low-pressure boilers, field waterflood, oil pipeline. In light&textile industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. The dosage of 1-10mg/L is preferred as scale inhibitor, 10-50mg/L as corrosion inhibitor, and 1000-2000mg/L as detergent. Usually, HEDP is used together with polycarboxylic acid. 4,Safety Protection:HEDP is Acidity, Avoid contact with eye and skin, once contacted, flush with water. Package and Storage:ATMP liquid: Normally In 30kg or 250kg net Plastic Drum;ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients request.Storage for ten months in room shady and dry place.
CAS:1429-50-1 Molecular Formula: C6H12O12N2P4Na8C Molecular weight: 612.13 1, Properties EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor. Its corrosion inhibition is 3~5 times better than that of inorganic polyphosphate. It is miscible with water, innocuous and none pollution to environment, has good chemical stability and temperature tolerance. It shows excellent scale inhibition ability under temperature 200oC. It can dissociate into 8 positive-negative ions, thus can chelate with many metal ions to form polymer reticulation complex, to destroy the normal crystallization of calcium scale. EDTMPS shows better antiscale effects to calcium sulfate and barium. 2, Specification: Items Index Appearance Clear yellow to umber transparent liquid Active component (as EDTMPS)% ¡Ý 30.0 Organic phosphonic acid(asPO43- )% ¡Ý 10.0 Phosphorous acid (as PO33- )%¡Ü 5.0 Phosphoric acid (asPO43- )%¡Ü 1.0 pH (1% water solution) 9.5-10.5 Density (20oC) g/cm3¡Ý 1.25 Chloride (as Cl-)%¡Ü 3.0. 3,Application range&using method:EDTMPS can be used as corrosion inhibitor in circulating cool water system and boiler water. It is a chelating agent in non-cyanogen electroplating industry and a water-softening agent in printing & dyeing industry. When used alone, 2~10mg/L is preferred. When built with HPMA by ratio ETDMP:HPMA=1:3, it can be used for low pressure boiler. It can also be built with BTA, PAAS and zinc salt.Organic phosphonic acid Package and Storage:Normally EDTMPS packed with 25kg net Plastic Drum, or packed as customer¡¯s required. Storage for ten months in room shady and dry place.
CAS: 15827-60-8 Molecular Formula: C9H28O15N3P5 Molecular weight: 573.2 1, Properties:DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibiting and temperature tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate.Under situation of alkali environment and high temperature (above 210oC) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. 2, Specification: Items Index Appearance Yello Brow or red brown viscous liquid Active acid % ¡Ý 50.0 Phosphorous acid (as PO33-)% ¡Ü 3.0 Chloride (as Cl-)% ¡Ü 12-17 Density (20oC) g/cm3 1.35-1.45 pH (1% solution) ¡Ü 2.0 Fe ppm ¡Ü 35. 3,Application range&using method DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially good in alkali circulating cool water system without additional pH regulation, It can also be used as scale and corrosion inhibitor in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used. DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelement's carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics. 4.,Safety Protection:Acidity, Avoid contact with eye and skin, once contacted, flush with water. Package and Storage:Normally In 25kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Appearance : Colorless or light yellow transparent liquid Active acid % : 48.0-52.0 Chloride (as Cl-)% : 2.0(or1.0) min pH value 1 solution : 2.0 max Fe (as Fe3+) (ppm) : 20 Density 20¡æg/cm3 : 1.33 min Colour Alpha (Hazen) : 40 max.
HEDP is an organ phosphoric acid corrosion inhibitor. It can chelate with FE, cu, and ZN ions to form stable chelating compounds. It can dissolve the oxidized materials on these metals surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250¡æ. HEDP has good chemical stability under high ph value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organ phosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals. Appearance: colorless or light yellow transparent liquid Active content HEDP : 58.0-62.0 Phosphorous acid as po33-%: 2.0 max Phosphoric acid aspo43- %: 0.8 max Chloride (as cl-)%: 0.01 max Ph 1 solution: 2 max Density 20¡æg/cm3: 1.40 Fe ion ppm : 10 max Colour alpha (hazen): 40 max.
PBTCA has low content of phosphoric, has structural features of both phosphoric acid and carboxylic acid group, which enable its excellent scale and corrosion inhibition properties. Its antiscale property under high temperature is far better than that of organophosphates. It can improve zinc salt solubility, has good chlorine oxidation tolerance and good composite synergy. Appearance: Colorless or light yellow transparent liquid Active acid : 50.0 min Phosphorous acid as PO33-%: 0.8 max Phosphorous acid as PO43-%: 0.5 max Density 20¡æg/cm3: 1.27 min pH 1 solution: 1.5~2.0.
Isothiazolinones is composed of 5-chloro-2-methyl-4-thiazoline-3-ketone (CMI) and 2-methyl-4-thiazoline-3-ketone (MI). The bactericidal effect of Isothiazolinones is carried out through breaking the bond between bacteria and algae protein. When contacted with microbes, Isothiazolinones can quickly inhibit their growth, thus leading to death of these microbes. Isothiazolinones has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, no residual, safety in operation, good compatibleness, good stabilization, low cost in operation. Isothiazolinones can mix with chlorine and most caution, anion, and non-ionic surfactants. When used at high dosage, its biosludge stripping effect is excellent. Isothiazolinones is a kind of fungicidal with properties of broad spectrum, high efficiency, low toxicity and non-oxidative, it is the ideal biocidal in industrial circulating cool water system and in wastewater treatment in oilfield, papermaking, pesticide, cutting oil, leather, detergent and cosmetics etc. Grade I : Grade II Appearance : Amber transparent liquid : Light yellow or light green transparent liquid Active content % : 14.0 min : 1.50 min pH value(as it) : 1.0-4.0 : 2.0-5.0 Density (20¡æ)g/cm3 : 1.25 min : 1.02 min CMI/MI (wt %) : 2.5-4.0 : 2.5-4.0.
HPMA is a low molecular weight polymeride, with average molecular weight 400-800. No toxicity, soluble in water, high chemical and thermal stability, decomposed temperature above 330¡æ. HPMA has obvious threshold effect under high temperature (350¡æ) and high pH£¨8.3£©level, suitable to be used in alkaline water system or built with agents. It has good scale inhibition against carbonate and phosphate scales under temperature 300¡æ with effective time as long as 100 hours. Due to its good scale inhibition and high temperature tolerance properties, HPMA is widely used in desalination plant of flash vaporization equipment, low pressure boiler, steam locomotive, crude oil evaporation, petroleum pipeline, and industrial circulating cool water systems. In addition, HPMA has good corrosion inhibition effect when used together with zinc salt. HPMA can also used as additives for cement. Appearance : Clear to umber transparent liquid Solid content % : 48.0 min Bromine value mg/g : 80.0 max Average molecular weight : 450 min pH 1 solution : 2.0-3.0 Density 20¡æ g/cm3 : 1.18 min.
DTPMPA is innocuous, easy to be dissolved in acid solution. DTPMPA has excellent scale and corrosion inhibition and good thermal tolerance ability. DTPMPA can inhibit the scale formation of carbonate, sulfate and phosphate. On situation of alkali environment and high temperature (above 210íµ) DTPMPA has better scale and corrosion inhibition effect than other organophosphines. Specification: items index Appearance Brown transparent liquid Active acid % 48.0-52.0 Phosphorous acidú¿as PO33-ú¬% 3.0 max Chloride (as Cl-)% 12-17 Density ú¿20íµú¬g/cm3 1.35-1.45 pHú¿1úÑ solutionú¬ 2.0 Fe ppm 35 max Usage: DTPMPA can be used as scale and corrosion inhibitor in circulating cool water system and boiler water, and especially in alkali circulating cool water system without additional pH regulation, It can also be used in oilfield refill water, cool water and boiler water with high concentration of barium carbonate. When used alone, little scale sediment is found even none of dispersant is used. DTPMPA can also be used as peroxide stabilizer, chelating agent in woven & dyeing industry, pigment dispersant, microelemen's carrying agent in fertilizer and concrete modifier. In addition, DTPMPA is used in papermaking, electroplating, acid cleaning and cosmetics. Normally In 250kg net Plastic Drum, IBC drum can also be used as required.
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. Specification: items index Appearance Colorless or light yellow transparent liquid White crystal powder Active acid % 48.0-52.0 95 min Chloride (as Cl-)% 2.0(or1.0) min 1.0 min pH valueú¿1úÑ solutionú¬ 2.0 max 2.0 max Fe (as Fe3+) (ppm) 20 20 Density ú¿20íµú¬g/cm3 1.33 min í¬ Colour APHA (Hazen) 40 max Usage: ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. The dosage of 1-20mg/L is recommended. As corrosion inhibitor, the dosage of 20-60mg/L is preferred. ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
EDTMPS is nitrogenous organic polyphosphonic acid, a part of cathodic corrosion inhibitor.Its corrosion inhibition is 3~5 times better than that of inorganic polyphosphate. It can be fully dissolved in water, innocuous and none pollution to environment, has good chemical stability and thermal tolerance. It shows excellent scale inhibition ability under temperature 200 centigrade.It can dissociate into 8 positive-negative ions, thus can chelate with many metal ions to form polymer reticulation complex, to destroy the normal crystallization of calcium scale. EDTMPS shows better antiscale effects to calcium sulfate and barium sulfate. Specification: items index Appearance Clear yellow to umber transparent liquid Active componentú¿EDTMPSú¬úÑ 30.0min Organic phosphonic acidú¿asPO43- ú¬úÑ 10.0min Phosphorous acidú¿as PO33-ú¬úÑ 5.0max Phosphoric acid ú¿asPO43- ú¬úÑ 1.0max pHú¿1úÑ water solutionú¬ 9.5-10.5 Density ú¿20íµú¬g/cm3 1.25min Chloride (as Cl-)úÑ 3.0max Usage: EDTMPS can be used as corrosion inhibitor in circulating cool water system and boiler water. It is a chelating agent in non-cyanogen electroplating industry and a water-softening agent in printing & dyeing industry. When used alone, 2~10mg/L is preferred. When built with HPMA by ratio ETDMP:HPMA=1:3, it can be used for low pressure boiler. It can also be built with BTA, PAAS and zinc salt. Normally In 250kg net Plastic Drum, IBC drum can also be used as required.
HEDP is an organophosphoric acid corrosion inhibitor. It can chelate with Fe, Cu, and Zn ions to form stable chelating compounds.It can dissolve the oxidized materials on these metalsí» surfaces. HEDP shows excellent scale and corrosion inhibition effects under temperature 250 Celsius degree. HEDP has good chemical stability under high pH value, hard to be hydrolyzed, and hard to be decomposed under ordinary light and heat conditions. Its acid/alkali and chlorine oxidation tolerance are better than that of other organophosphoric acids (salt). HEDP can react with metal ions in water system to form hexa-element chelating complex, with calcium ion in particular. Therefore, HEDP has good antiscale and visible threshold effects. When built together with other water treatment chemicals, it shows good synergistic effects. The solid state of HEDP is crystal powder, suitable for usage in winter and freezing districts. Because of its high purity, it can be used as cleaning agent in electronic fields and as additives in daily chemicals. HEDP is used as scale and corrosion inhibition in circulating cool water system, oil field and low-pressure boilers in fields such as electric power, chemical industry, metallurgy, fertilizer, etc.. In light woven industry, HEDP is used as detergent for metal and nonmetal. In dyeing industry, HEDP is used as peroxide stabilizer and dye-fixing agent; In non-cyanide electroplating, HEDP is used as chelating agent. HEDP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required HEDP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition. ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent. The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent. ATMP is usually used together with organophosphoric acid, polycarboxylic acid and salt to built all organic alkaline water treatment agent. ATMP can be used in many different circulating cool water system. ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Manganite (manganese greensand):-this product requires regeneration with kmno4. 25 kg/ bags
Mono Ethylene Glycol Molecular formula: C5H8O Molecular weight: 62.07 CAS: 107-21-1 Mono Ethylene Glycol APPEARANCE·ª Clear,colorless liquid Purity %min 99.8 Diethylene glycol %max 0.05 Color(APHA)max 10 Water content % max 0.1 Ash,wt.% max 0.005 Chlorides(as CL),ppm max 0.1 Iron,ppm,max 0.07. Properties: The ethylene glycol family of products are clear, moderately viscous, hydroscopic liquids at room temperature. For your convenience, below is a summary of specifications and typical properties of the three major ethylene glycols: Ethylene Glycol (EG), Diethylene Glycol (DEG), and Triethylene Glycol (TEG). Applications: Ethylene glycols find many diverse industrial uses which include freeze protection, heat transfer and hydraulic fluids; natural gas and hydrocarbon treating agents; hydroscopic agents for paper, cork and textile conditioning; plasticizer formulations and raw materials for ester and polyester production. The ethylene glycol familys solvency properties are useful in custom formulation of paints, dyes, inks and other blended products. Packing:230kg/drum·+18.4MT/20FCL.
Product Name: Phosphoric Acid Molecular formula: H3PO4 Molecular weight: 98.00 CAS No: 7664-38-2. Specification Phosphoric acid Specifications Industrial grade Food grade H3PO4 85.0% min 85.0% min Chloride, as Cl 0.0005% max 0.0005% max Sulfate, as SO4 0.005% max 0.005% max Iron, as Fe 0.002% max 0.002% max Arsenic, as As 0.005% max 0.0001% max Heavy metal, as Pb 0.001% max 0.001% max Whiteness 30% max 30% max . Applications: Used for phosphate industry, electroplating and chemical polishing, pharmaceutics and sugar-making industries, producing compound fertilizer, etc. Package: 35kg/drum; 21MTS/20.
Product·ªMethyl Methacrylate CAS No. : 80-62-6 Specification Methyl Methacrylate(MMA)-purity 99.9%min Methyl Methacrylate(MMA)-Water 0.004%max Methyl Methacrylate(MMA)-Acidity 0.005%max Methyl Methacrylate(MMA)-Colour 5max Methyl Methacrylate(MMA)-Light fractions 0.05max Methyl Methacrylate(MMA)-Heavy fractions 0.08max Methyl Methacrylate(MMA)-Inhibitor(TA) 0.04max . Usage: Mainly used as organic glass monomer, methyl methacrylate and for making plastic cast acrylic sheet or other plastics, paint, etc Properties : Colorless liquid, volatile. Melting point - 48 fp c, boiling point 100-101 0.9440 relative density 1.4142 refractive index 10 degrees, flash point of soluble in ethanol, ethyl ether, acetone etc. Various organic solvents. Slightly soluble in water and glycol. Storeage: Zinc steel barrel packaging, ate 190kg. Stored in a cool ventilated place, methyl methacrylate transported as common danger Package:190kg/ Drum 15.2MT PER 20'FCL.
Product:Barium chloride CAS No: 10361-37-2 Specification: ITEM GRADE1 GRADE2 GRADE3 GRADE4 GRADE5 BaCl2 fª99.50% fª99.00% fª98.00% fª93.00% fª86.00% H2O(1800C) f_0.5000% f_0.7100% f_1.8000% f_6.5000% f_13.000% Calcium (Ca) f_0.0100% f_0.0300% f_0.0360% f_0.0460% f_0.0650% Sodium (Na) f_0.0012% f_0.0012% f_0.0012% f_0.0020% f_0.0030% Sulphide (Base on S) trace trace f_0.0050% f_0.0100% f_0.0100% Iron (Fe) f_0.0003% f_0.0005% f_0.0008% f_0.0010% f_0.0010% Magnesium (Mg) f_0.0010% f_0.0050% f_0.0050% f_0.0050% f_0.0050% Strontium (Sr) f_0.0010% f_0.0050% f_0.0050% f_0.0080% f_0.0080% Water insoluble f_0.0080% f_0.0100% f_0.0120% f_0.0150% f_0.0150%. Usage:Material for producing other barium salts;used in the cotton reverting dyeing, leather industry, pesticide insecticide, fabric dyeing, mordant,water softener,steam antiscale,paper making,lake toner,extinction of rayon. Storage and transportation:Stored in dry and draughty place.Do not store it together with acid,alkali and food. Package·ª25kg pp bag ,20MT per 20container.
