1. Name: flat washer din7989 2. Material:mild steel q235 3. Size: m3-m64 4. Finish: white/blue/yellow zic; black; hdg 5. Packing: 25kgs/ctn; 900kgs/plt 6. Price term: cif/fob 7. Grade: 4.8 Packing: 25kgs/ctn; 900kgs/plt
1. Name: flat washer din434/435 2. Material:mild steel q235 3. Size: m3-m64 4. Finish: white/blue/yellow zic; black; hdg 5. Packing: 25kgs/ctn; 900kgs/plt 6. Price term: cif/fob 7. Grade: 4.8 Packing: 25kgs/ctn; 900kgs/plt
Availble stocks on hane Bolt: m1.6 up to m36,#2-56 up to 1-1/2 dia. Any quantity.
Specifications Hexagon bolt din933 hexagonal head bolt and nut Surface: z.P, black, hot dip, dacromet Size:6-8*20-400 4.8, 8.8, 10.9.12.9 Hexagon bolt Din933 hexagonal head bolt and nut 1) various kinds of bolts available 2) can be made with different tensile strength, such as class 4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 10.9 and 12.9, inperial grade 2, 5, 8 and 10 3) can be supplied with different finish, such as bright, zinc plated, hot-dip galvanized, mechanical plating, black 4) can be made with different standards, such as iso, din, as/nzs, gb, ansi, bs and special standard according to the drawing Hexagon bolt din933 hexagonal head bolt and nut Surface: z.P, black, hot dip, dacromet Size:6-8*20-400 4.8, 8.8, 10.9.12.9
Specifications Xl-b11 din6921 flange bolt: 1) material: carbon steel 2) size: all size 3) surface: zp Bolt: 1) size: all sizes 2) material: carbon steel 3) surface: zinc plated Xl-b11 flange bolt 1) delivery time: in 30 days 2) supply ability: 800 tons per month 3) main market: european market 4) main products: carriage bolt, hex bolt, roofing bolt, confirmat screw, furniture screw, euro screw, handle screw, hammer screw, dowel screw Box, color box, carton, bag, pallet, or according to your demand.
Plug insert---insert with screws 1.High qualiy control 2.Matched rohs 3. Brass, stainless steel 4.Supply ablity:100000pcs/day 5. Minimum order quantity :10000pcs Cartons and pallets
Specifications Flat head hex countersunk bolts Size:m3-m16 Length:10mm-180mm Material:carbon steel, stainless steel304/316, alloy steel Flat head hex countersunk bolts 1) material: high quality carbon steel and alloy steel Class :4 , 5, 6, 10, gr.2, gr.2h , gr.Dh 2) material :stainless steel :304 , 316, 304l , 316l , 410, 430 Class: a2-50 , a4-50 , a2-70 , a4-70 , gr.B8, gr.B8m Surface refine : Part galvanization , colorful galvanization , army green galvanization , black galvanization , steam black , ash phosphorus , brass , nickel plate , chrome plate , heating galvanization , zinc plated(yellow, black, green) Packing: 1) bulk packing: about 20-25kgs per carton. Load cartons in pallets 2) assortment in poly bag or plastic box. 3)as to customers' requirement Poly bag, small box, carton + pallet
Specifications 1) din 975, class 4.8, class 8.8, ss 304 (a2), ansi 2) unc, 2a, grade 2, grade 5, astm a193 b7, b7m, b8, b16, l7, ss 304 (a2) 1) din 975, class 4.8, class 8.8, ss 304 (a2), ansi 2) unc, 2a, grade 2, grade 5, astm a193 b7, b7m, b8, b16, l7, ss 304 (a2) 3) size: m6 to m102 or 1/4" to 4" 4) length: 50mm to 1, 000mm or 2" to 40" (40 inch) 5) finish: black, zinc plated, hot dip galvanized, xylan 1424, xylan 1014, Different kinds of precision stud bolt, m42 stud bolts, stud bolt m12, types of stud bolts 1) material: different kinds of stainless steel, iron, copper or aluminum etc 2) main equipment: cnc lathe, automatic lathe, hand lathe grinder, thread rolling Machine, tapping drilling machine etc 3)advanced measuring & testing equipment: projecting apparatus, roughness tester, Hardness tester, concentricity tester etc 4) surface treatment: polishing, zinc plating, nickel plating or chrome plating, Phosphating, black anodization etc 5) parts are produced according to customers' drawing or sample. General exporting package or according to requires
Specifications 1)sizes:m5-m20 1/4''-5/8'' length: 6mm-300mm 2)standard:din, unc/unf, bsw 3)grade/class:4.8 8.8 10.9 ss201 ss304 ss312 ss316 1)sizes:m5-m20 1/4''-5/8'' length: 6mm-300mm 2)standard:din, unc/unf, bsw 3)grade/class:4.8 8.8 10.9 ss201 ss304 ss312 ss316 Products name: u-bolt 1)size:m5-m20 1/4''-5/8'' length:3/8''-12'' 2)standard:din unc/unf bsw jis iso 3)grade:carbon steel:4.8 6.8 8.8 10.9 12.9 stainless steel:ss200 ss304 ss312 ss316 copper 4)finish:galvanized(zinc-plated) hdg mechanical plating dacromet My factory is professional manufacture in china.We supply(bolts, thread bar, wooden screw, anchor furniture screw, nuts, washer and non-standard parts) if you are interested in these products, pls don't hesitate to contact me.I am not only a sales man, but also a worker.So we may discuss about some professional knowleadge.Haiyan is also the family of fastener, we survive on quality and reputation.Sincerely look forward to cooperation with every country the world Haiyan high strength fastening parts co., ltd has grown rapidly over the last 23 years(since 1987) to become a reputable supplier of quality fastener.Our experience in making lathe-made and cold forging fastener has established us as a most reliable supplier of various types of fasteners. Today, our customer base has grown to sonsist of hundreds of both domestic china and foreign companies, including some renowned global corporate in their various of programs as an approved vendor. We are an import and export right with a twenty-five years old factories, the export rate of more than 85% Inner packing: carton cases outer packing: wooden cases or pallets
Specification: Screw diameter: d20mm-d220mm Mould clamping force: 250t-3200t Shot weight: 30g-30000g Technical information Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: ¡ã 950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm. Slushing oil coated& film wrapped in wooden case
Specification: Screw diameter: d20mm- d220mm Mould clamping force: 250t-3200t Shot weight: 30g-30000g Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: 950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm. Slushing oil coated& film wrapped in wooden case
Specification: Screw Diameter: D15- D 300 L/D ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: General type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base Materials: (1)38CrMoAlA(JIS SACM645) (2)42CrMo(AISI 4140) (3)4Cr5MoSi V1 (JIS SKD-61) (4)9Cr18MOV (5)HPT Bimetallic alloy materials: 1)Fe-based alloy 2)Ni-based alloy/Deloro alloy 3)Co-based alloy 4)NiCo-based alloy 5)Tungsten carbide/Wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000HV Nitrided brittleness: less than grade 1 Surface roughness: Ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950HV Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing Oil Coated& Film Wrapped in Wooden Case
Specification: Screw diameter: d15- d 300 L/d ratio: 15-46 Product classification: Aiming at different plastic products the screw can be chosen from: general type, pin type, barrier type, separation type, and gas-exhausting type, etc. Base materials: (1)38crmoala(jis sacm645) (2)42crmo(aisi 4140) (3)4cr5mosi v1 (jis skd-61) (4)9cr18mov (5)hpt Bimetallic alloy materials: 1)fe-based alloy 2)ni-based alloy/deloro alloy 3)co-based alloy 4)nico-based alloy 5)tungsten carbide/wolfram carbide Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: >950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing oil coated& film wrapped in wooden case
Specification: 45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188 The above are standard specifications, we can customize according to customers' requirements. The compression ratio of screws can be designed according to different products and ingredients. Base materials: 1)38crmoala(jis sacm645) 2)42crmo(aisi 4140) 3)4cr5mosi v1 (jis skd-61) 4)9cr18mov 5)hpt Technics: Heat treatment High-frequency quenching Nitriding treatment Hard-chrome electroplating Bimetallic alloy welding Bimetallic alloy centrifugal casting Technical parameter: Nitrided layer depth: 0.5-0.8mm Nitrided hardness: 900-1000hv Nitrided brittleness: less than grade 1 Surface roughness: ra0.4 Linearity of screw: 0.015mm Hard-chrome plating hardness after nitriding: ¡ý 950hv Chrome-plating layer depth: 0.025-0.085mm Bimetallic layer depth: 3mm Slushing oil coated& film wrapped in wooden case
1.65/132 conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale Dimension:15/30 25/55 35/75 40/83 45/90-99 48/ 112-117 50/105-110 51/ 105-12055/ 110-125 58/ 125 60/ 125-129 65/ 120-132 68/ 147 70/ 150 74/ 156-162 80/ 143-156-162 86/ 177 92/ 184-188 95/ 193 105/ 203
1.Cincinnati conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale 15/30 25/55 35/75 40/83 45/90-99 48/ 112-117 50/105-110 51/ 105-12055/ 110-125 58/ 125 60/ 125-129 65/ 120-132 68/ 147 70/ 150 74/ 156-162 80/ 143-156-162 86/ 177 92/ 184-188 95/ 193 105/ 203
1.80/156 conical twin screw and barrel 2.Alloy hardness:hrc50-65 3.Centrifugal casting(tungsten carbide) 4.Hot sale 15/30 25/55 35/75 40/83 45/90-99 48/ 112-117 50/105-110 51/ 105-12055/ 110-125 58/ 125 60/ 125-129 65/ 120-132 68/ 147 70/ 150 74/ 156-162 80/ 143-156-162 86/ 177 92/ 184-188 95/ 193 105/ 203
Our products (nuts) are not antidumping and no have anti-dumping duty in europe and all friendly country, you can purchasing its so easy base on lower cost. And we can produce more special nuts or non-standard parts as per your drawing / photo / samples, please conatct us. Purchasing notice: please send full enquiry to us, include following terms: 1. Product's (nuts) type and standard type, -- e.G. T nuts/tee-nut din1624, hex welded nuts din929, hex castle nut din935... 2. Quantity, --- e.G. 500k (500.000pcs) , 100m(100.000pcs), different quantity you will get different price, greater quantity have lower price. 3. Size: ----- e.G. M8-1.25 or 3/8"-16 4. Surface: --- e.G. Plain or black or zinc plating or blue zinc 5. Price terms: e.G. Fob Shanghai port or CIF London port. For example: (a standard inquiry list) t nuts (tee-nut) din1624 zinc - m8 - qty: 800.000pcs - CIF southampton UK by sea. Carton size: 32x18x25
High tensile bolts. Each pocket 100 nos
Plow bolts are widely used in fixing the blades & cutting edges, which can be increased of heir service life by using our plow bolts. According to different material and standard, we can manufacture all grades of plow bolts. As our featured products, plow bolts in grade 10.9 & 12.9 with corresponding hex.Nuts in grade 10 are warmly welcomed by our customers, we can mark your own logo but conditions on acceptable order quantity. Our plow bolts can identify cat & komatsu & ajax & byg part numbers fully. Diameter: 3/8¡±-1-3/8¡± Length: no more than 17¡± Material: 20/40cr Grade: 4.8~12.9(din) Surface: black / galvanized Place of origin: ningbo china Packaging: carton+pallet. Packing neutral export carton(23cmx23cmx13.5cm )/pallet(105cmx80cmx70cm)
