5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi 5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi
Aluminum H-shaped steel is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products. Parameter Product Name Aluminum H-shaped steel Price range $1000-$2000 Discounts are available for large orders Minimum order quantity 1 ton Specifications Thickness 1-50mm, External diameter3-900mm,or according to requirements Standard ASTM, JIS, DIN, GB, Steel Grade ASTM B210/B241 JIS H4080 DIN 1725-1-1986 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test. Product certification ISO,SGS,BV,TUV, Processing Service Welding, Drilling, Cutting, Bending Surface treatment Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc. Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T ,LC Exporting country Europe: Norway, Romania, Hungary, Austria South America: Chile, Argentina, Colombia, Venezuela , etc
Vinh Hung specializes in manufacturing safety parapet for transport, civil and industrial works. Parapet products are manufactured according to the typical design of the company or according to customer drawings. Our Parapet products conform to the standards: BS EN 1317, TCVN 11823-13: 2017. All parts of the parapet are processed on modern machinery lines, high precision, in order to facilitate the installation and durability of the product. Parapets are the outermost of the bridge deck. Handrails are used to protect vehicles and people when a collision occurring and direct the vehicles on bridges. Parapets are mainly used steel, aluminum alloy, wood, reinforced concrete. Installed on the bridge concrete barrier, parapets donot only ensure traffic safety but also increase the aesthetics of the whole bridge. Parapets consist of column system, handrails and the middle bar which are hot-dip galvanized or electrostatic painting with multiple types, sizes and designs. Parapets aesthetics are required very high when designing, especially the bridges in the city area or in the important roads. All details of the parapet are processed on modern machinery lines with high precision and skilled workers to improve job efficiency as well as durable installation of products. Vinhhung parapets are hot-dip galvanized according to AASHTO M111 (ASTM A123) which would bring the maximum life for products. The high quality of Vinhhung parapets is affirmed when reaching out to the region with export orders to projects in Brunei
6063T5
6063T5
Aluminum profiles for home appliances: heat sink, conveyor, vacuum tubes, ... Aluminum profiles for solar mounting system Aluminum profiles for construction
- High durability with aluminum surface coated with NANO technology - anti-dust and minimize water retention, as well as any impact of the environment. - Thickness range from 2mm to 7mm - Safe with fireproof material inside - Flexible, high bending, and also ensure the hardness to meet the specific requirements of each project - Rich in color, diversified in types of patterns with many types of wood, stone texture helps to replace natural materials. - Easy to install and install under all conditions
1Standard size:Thickness (T):3mm,4mm,5mm,6mm,7mm,8mm 2Width (W):1220mm,1250mm 3Length(L): as the seller's option 4Film coating : PVDF,PE 6Plastic materials: PE a) Front: aluminum alloy sheet coated with polyester resin (PE) roasting painting b) Core: nontoxic polyethylene c) Back: aluminum alloy sheet coated with polyester resin painting d) Surface finish: treated with PVDF and PE resin rolling roasting coating
Aluminum profile 6063T5/ 6063T6/ 6060T5/ 6061 Anodize
