Base oil, zinc sulphate, pet resin.
Ammonium nitrate is granulated product without foreign solids. Universal highly concentrated nitrogen fertilizer containing ammoniac and nitrate forms of nitrogen in equal ratios. Application of ammonium nitrate in small doses reduces the losses of nitric nitrogen due to leaching. Nitrate and ammonium nitrogen N as dry matters, not less than: 34,4%
- Variety Flavor: Milk/Vegetable/ Peach/ Cheese/ Pudding/Fruit - Ingredients: Potato starch, white sugar, chicken egg, flour, milk powder, Maltodextrin, Fructose syrup, Ammonium bicarbonate, Sodium bicarbonate, Food flavor. - Net weight: 130g and 100g - Specification: 130gx24 jars/ 100gx20 jars - Made in Viet Nam - Shelf life: 12 months
Product Description - Manufacturer: Weifang TTCA - Citric Acid monohydrate Quick Details Classification: Food & Feed Additives Molecular Formula: C6H8O7 Melting Point: 153-154.5 Boiling Point: 309.6 °C at 760 mmHg Stability: Stable. Incompatible with bases strong oxidizing agents reducing agents metal nitrates. Water Solubility: 750 g/L (20) Refractive index: 1.493~1.509 Flash Point: 100 Purity: 99.9% Appearance: white crystal Usage: CITRIC ACID IS MAINLY USED AS ACIDULANT FLAVORING AGENT PRESERVATIVE AND ANTISTALING AGEN Packaging & Delivery Packaging Detail: 25 kg pp bag Delivery Detail: Within 15 days Detailed Description CITRIC ACID IS MAINLY USED AS ACIDULANT FLAVORING AGENTPRESERVATIVE AND ANTISTALING AGENT IN FOOD ANDbeverage INDUSTRY. MOREOVER IT IS ALSO USED AS ANTIOXIDANT PLASTICIZER AND DETERGENT IN CHEMICAL COSMETICS AND CLEANING INDUSTRIES. ITEM SPECIFICATION RESULTS Appearance White crystal conform Solubility Pass test Pass test Clarity & color solution Clear Clear Content % 99.5 – 101.0 99.68 Sulphate ppm 150
Sugar ICUMSA 45, CO : Brazil, White refined cane sugar ISUMSA 45, Color : Sparkling Crystal White, Polarization at 20'c : 99.8% min., Moisture : 0.04% max., Sulphated Ash Content : 0.04% max, reducing Sugar : 0.05 max by weight
Cable Grout Industry standard high performance grout for the grouting of cables in post-tensioned concrete, void and fissure grouting, etc. Description A specially formulated Portland Cement shrinkage-compensated powder mix designed for the grouting of cables in post-tensioned concrete. The material readily mixes with water to produce a particularly fluid flowing grout which will penetrate and fill fine voids within and around the cables then harden without shrinking to give a high strength product. Uses include grouting of cable ducts, voids and fine fissures, support of cable anchor plates and ground anchors. Also to provide bearing or contact between structural elements, for grouting behind shafts and tunnel linings, and for underpinning, loose floor and road slabs. Once hardened and cured, high compressive strengths are achieved giving resistance to static and dynamic stresses. Cable Grout has a total chloride, sulphate and sulphide-ion content below that specified Advantages Does not contain aluminum powder nor any components which generate hydrogen gas, cardon dioxide or oxygen. Silica fume enhanced for low permeability. Non-metallic; will not stain or rust. Non-corrosive; does not contain chlorides. Zero bleed, even at high flow Excellent for pumping: Does not segregate, even at high flow. No build-up on equipment hopper. Superior freeze/thaw resistance. Even with his great fluidity, it can disperse water (thixotropic) Preparation - Genetic tubes must be cleaned with a high-pressure air compressor - Check the vents and pressure test for gen tubes - Repair leaks before grouting pumb Mixing - Water : mortar powder = 1 : 3.4 parts by weight. (6.8 litres of water per barrel) - With volume 15 liters: Use a colloidal solution mixer (to get the best results) Add water and continuously mix for 5 minutes to achieve a uniform Continue to maintain slowly mixing during grout pump Important Note Non mixing by hand Yield As a guide 1 barrel yields approximately 14 litres of mortar Shelf Life: 9 months Packaging: 25kg/barrel Storage Conditions - Store properly in dry conditions in undamaged and unopened original sealed packaging Cleaning of tools - Clean all tools and application equipment with water immediately after use. Hardened/cured material can only be mechanically removed
Potassium sulphate (sop), building chemical.Manufacturer
