Sawdust Briquette Charcoal is an organic material derived from wood, bamboo, and cork that is thinly planed and crushed. Due to their small size and unevenness, in the past sawdust was rarely used and was only considered a type of natural waste. Currently, people use Japanese technology to produce sawdust charcoal. Specification of SAWDUST Charcoal Moisture: 5% Max Ash: 3% Max Volatile matter: 8.01% Max Fixed Carbon: 80% Min Calorific: 7900 Kcal/kg Min Burning time: 5-6 hours
A eucalyptus is an industrial tree which is grown for logging and creating shade. The tree is about 5 to 6 years old with a height of over 7 meters and a trunk diameter of about 9 to 10 meters. Small elongated leaves. Eucalyptus wood is used to make paper or charcoal production (white charcoal, black charcoal). People often use branches and young trees used to produce charcoal. Specification of Solid EUCALYPTUS charcoal Moisture content: 2.1% Ash content: 4.53% Volatile matter content: 28.35% Fixed carbon content: 67.12% Calorific value: 6892 kcal/kg Burning time: 3 - 3.5 hours Dimension of Solid EUCALYPTUS charcoal Shape: Solid stick Diameter: 3-8 cm Length: cut as customer's request (15-20 cm)
Each dragon fruit is carefully selected and refrigerated process after being freshly harvested from our farms to preserve its flavor White/ Red Flesh - Size: 350-490gram - Small Size 500gram ups - Big Size - Packing: 4kgs,9kgs per carton or as customer request *We can do as our customer's brand request - Origin: Vietnam -MOQ: 1x20RF
In Vietnam, Longan tree is grown quite commonly along the length of the country from North to South. Logan trunk, crooked, many branches and canopy. The fresh wood of the Longan tree is reddish-brown or yellow-brown. In addition, Longan trees are also exploited to make firewood, charcoal, and handicrafts. The large wooden body will be used to make handicrafts, the medium and small body will be exploited for Longan wood charcoal. Specification of LONGAN charcoal Moisture content: .75% Ash content: 2.72% Volatile matter content: 28.17% Fixed carbon content: 69.11% Calorific value: 7216 kcal/kg Burning time: 3.5 - 4 hours Dimension of LONGAN charcoal Shape: Round stick Diameter: 3-8 cm Length: cut as customer's request (15-20 cm)
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
Product Name Straight Wire Rod Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~18MM Length 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures.
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient .
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
Product Name Carbon Steel Wire Rods Material Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Diameter 0.1MM~12MM Length in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape Round Technique Hot rolled Packing Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. Transparent oil,anti-rust oil 3. According to clients requirement Ends Plain end MOQ 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Product Name : Carbon Steel Wire Rods Material : Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc. Wall Thickness : 0.1MM~12MM Length : in coils 5m-14m,5.8m,6m,10m-12m,12m or as customer's actual reques Standard : JIS G3466, EN 10219, GB/T 3094-2000, GB/T 6728-2002 Section Shape : Round Technique : Hot rolled Packing : Bundle, or with all kinds of colors PVC or as your requirements Surface Treatment 1. Galvanized 2. PVC,Black and color painting 3. Transparent oil,anti-rust oil 4. According to clients requirement Ends : Plain end MOQ : 1 Tons, more quantity price will be lower Product Application 1. Fence, greenhouse, door pipe,greenhouse 2. Low pressure liquid, water, gas, oil, line pipe 3. For both indoor and outdoor the building construction 4. Widely used in scaffolding construction which is much cheaper and convenient * Wire rods are mainly used as blanks for wire drawing, and can also be directly used as building materials and processed into mechanical parts. * Wire rod, also known as wire rod, usually refers to small diameter round steel in coils. The diameter of the wire rod is in the range of 5-19 mm (usually 6-9 mm), and its lower limit is the minimum size of the hot rolled steel section. * Wire rods are round steel with relatively small diameter. The commodity form is supplied in coils. On the construction site, the common ones are those with diameters of 6, 8, 10 and 12 mm, most of which are low carbon steel. Generally, they are not used for the main reinforcement of reinforced concrete structures, but are mainly used for making reinforcement sleeves. There are also small diameter "brick reinforcement" used in brick concrete structures. Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project Packing and shipping * Our products are exported to multiple overseas countries and regions such as Europe, America, South Asia, Southeast Asia, Africa, and Latin America, and have won the trust and support of customers with excellent quality and service. * During the supply process, the company can timely use sufficient funds to adjust the production variety and model of the steel plant, ensuring the use needs during the peak construction period
6061 T4 round aluminum bar is are magnesium and silicon which has moderate strength good corrosion resistance weldability and good oxidation effect In particular there is no stress corrosion cracking tendency its excellent weldability corrosion resistance and cold workability are good and it is a wide range of use A very promising alloy Can be anodized coloring can also be painted on enamel suitable for building decoration materials It contains a small amount of Cu so the strength is higher than 6063 but the quenching sensitivity is also higher than 6063 after extrusion can not achieve wind quenching need to resolution treatment and quenching aging in order to obtain higher strength 6061 aluminum alloy contains 0408 silicon 07 iron 01504 copper 015 manganese 0812 magnesium 004035 chromium 025 zinc 015 titanium and a residual amount of aluminum The tensile strength of 6061 aluminum alloy is 180Mpa yield strength is 110Mpa elongation is 14 widely used in the manufacture of trucks building ships trams furniture mechanical parts precision machining industrial materials and other fields Data presentation Product name Aluminium bar Alloy 10501060107011002A062A123003300431054A01 5A0650525056508357545A0660616063620170057075 Temper H111H112H12H16H18H24H32H14T3T4T5T6T8 Diameter 10mm400mm Length 1000mm12000mm or customized Type OEMODM Processing Service Cutting surface treatment rough bending hardening surface painting forming etc Standard ASTMAISIJISGB DINEN Certificates ISO SGSBV MOQ 1 TON Delivery time Future Goods 1020 days Ready stock 510days Packaging Seaworthy Wooden pallet Wooden caseAluminum case Application Transportation construction machinery and equipment decoration industrialization etc Payment Terms TT LC etc Warehouse storage In order to meet the needs of customers small batch multispecification to spot the minimum order quantity of a single specification is 1 ton we have been committed to 18 series aluminum sheet aluminum sheet aluminum coil aluminum foil aluminum tube and other aluminum products R D production and sales Annual inventory of more than 3000 tons complete brand specifications truly meet customers onestop procurement
5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi 5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi
440 Stainless Steel Coil Strip Specifications: Grades Stainless Steel J1, J2, J4, 201, 202, 301, 304, 304H, 304L , 309, 309S, 310, 310S, 316, 316L, 316TI, 321, 321H, 347, 409, 410, 410S, 420, 430, 441, 904L Thickness 0.2mm - 60mm Width 3.2mm - 2000mm Length AS PER CUSTOMER'S REQUIREMENT Type of Material STAINLESS STEEL SOFT, DEEP DRAW, EXTRA DEEP DRAW, QUARTER HARD, HALF HARD,FULL HARD. Finish NO.1, 2B, 2D, 2H, 2R, No.4, HAIRLINE, SCOTCH BRITE, SATIN FINISH, NO.8, BA. Standard ASME, ASTM, AISI, EN, BS, GB, DIN, JIS, SUS, etc. manufacture Cold Rolled ,hot rolled Application Decoration,Industry,food processing and medical industry ,ships building industry etc. Certification SGS, BV, IQI, TUV, ISO, CE, etc Coil Weight 3-10 Tons Or As Your Requirements Tolerance ±1% MOQ 1 ton Supply Ability 5000 tons / month Lead Time 7-15 working days after the receipt of 30% deposit Payment Terms 30%T/T Advance + 70% Balance Price Terms FOB, CFR, CIF, EXW Packing Standard sea-worthy package or as required Characteristics of 440 Stainless Steel Coil: Excellent work hardening (non-magnetic); Excellent high temperature strength; No magnetism in solid solution state; Cold rolled products have good gloss and beautiful appearance. Uses: seawater equipment, chemical, dye, paper making, oxalic acid, fertilizer and other production equipment; Photography, food industry, coastal facilities, ropes, CD rods, bolts, nuts. 440 is widely used in the chemical industry because of its excellent corrosion resistance. 440 is also a derivative steel of 18-8 austenitic stainless steel, with 2 ~ 3% Mo added. On the basis of 440, many steel grades are also derived. For example, 440Ti is derived after adding a small amount of Ti,440 is derived after adding a small amount of N, and 317L is derived by increasing the content of Ni and mo
Decoration field: 304 stainless steel can be used in decoration field. 304 stainless steel has been widely used in the decoration industry due to its high tensile strength, good internal wall finish and excellent wear resistance. Just like our common stainless steel stair guardrails, handrails, stainless steel anti-theft windows, stainless steel doors, stainless steel tables and chairs, they are all made of 304 stainless steel decorative tubes. In life, the bathroom is wet and the kitchen is full of lampblack, so 304 stainless steel can be used in these two places. Industrial field: 304 stainless steel is used in the industrial field, mainly for industrial transmission pipelines and mechanical structural parts such as petroleum, chemical, medical, food, light industry, mechanical instruments, etc. Generally, the working pressure of water supply system in high-rise buildings is high, while the tensile strength of 304 stainless steel is strong, and the possibility of water leakage under external force is very small. It is an important material of water supply system in high-rise buildings Product name Color Coated 304 Stainless steel sheet Grade 304 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Decoration field: 304 stainless steel can be used in decoration field. 304 stainless steel has been widely used in the decoration industry due to its high tensile strength, good internal wall finish and excellent wear resistance. Just like our common stainless steel stair guardrails, handrails, stainless steel anti-theft windows, stainless steel doors, stainless steel tables and chairs, they are all made of 304 stainless steel decorative tubes. In life, the bathroom is wet and the kitchen is full of lampblack, so 304 stainless steel can be used in these two places. Industrial field: 304 stainless steel is used in the industrial field, mainly for industrial transmission pipelines and mechanical structural parts such as petroleum, chemical, medical, food, light industry, mechanical instruments, etc. Generally, the working pressure of water supply system in high-rise buildings is high, while the tensile strength of 304 stainless steel is strong, and the possibility of water leakage under external force is very small. It is an important material of water supply system in high-rise buildings Product name Color Coated 304 Stainless steel sheet Grade 304 Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate
Dx51d galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc. The commonly used wrought zinc alloys are zinc aluminum alloy and zinc copper alloy. The former contains 4%~15% aluminum. In order to improve the strength and hardness of the alloy, a small amount of copper, magnesium and other alloy elements are added. It has high strength and is easy to form. It can replace some brass or duralumin to make precision forgings. The latter is 0.7%~1.5% copper, which can increase the strength and impact toughness of the alloy and reduce the plasticity. Zinc copper alloy is suitable for making daily hardware products or replacing part of brass. Product name DX51D Galvanized steel sheet Standard ASTM,DIN,JIS,BS,GB/T,GB,EN Material DX51D Application Villas ,townhouse, apartments ,tourist destination building ,and roof conversion project Thick 0.12-4.0 mm / BWG / AWG or as your request Width 20-1500 mm or as your request, Normal width is 914/1000/1219/1250/1500 mm Zinc Coating 30~600 G/M2 Surface Structure Regular spangle,Minimum spangle, Zero spangle, Big spangle Surface Treatment Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass Package Waterproof paper & plastic film & iron packing & bunding, or as customer's requirement
* SGCH steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B. DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring. DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A. The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc. Commodity : SGCH Carbon steel coil Standard: DIN GB JIS BA AISI ASTM EN GOST ETC. Mechnical : Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality Surface treatment : Chromated and oiled, and ant-ifinger Hardness : Softy, half hard ,hard quality Grade : DC01 ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc. Thickness : 0.12-12.0mm Width : 600-1500mm Coil weight : 3-34MT/Coil or as your request MOQ : 3-5 MT Packaging : Export standard, seaworthy ID: 508mm or 610mm Trade Term : FOB, CFR, CIF, EXW ETC. Transport Type : Container, bulk and train
ST37 steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B. DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring. DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A. The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc. Commodity: ST37 Carbon steel coil Standard: DIN GB JIS BA AISI ASTM EN GOST ETC. Mechnical: Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality Surface treatment: Chromated and oiled, and ant-ifinger Hardness: Softy, half hard ,hard quality Grade: DC01 ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc. Thickness: 0.12-12.0mm Width: 600-1500mm Coil weight: 3-34MT/Coil or as your request MOQ: 3-5 MT Packaging: Export standard, seaworthy ID: 508mm or 610mm Trade Term: FOB, CFR, CIF, EXW ETC. Transport Type: Container, bulk and train
