Pet Flakes
To Perfectly Insulate The Joints Of Your Cables, Head To Head Or Branch Of Junctions Casting resins are suitable for: Mechanical fixing of components Electrical insulation Protection against corrosion Reduction of sensity against mechanical stress like vibration, impact, push, bending and tensile forces Better heat transfer Protection of components against tampering, guarantee control We can offer the appropriate product for your demand Temperature stable from 40 to 550 C Each viscosity you require soft to hard Transparent or coloured Handling by hand or by filling machine for cast resin systems Potlife: very short (10 sec) to 3 hours Hot or coldcuring 1 or 2component systems 1 kg to 30 tons per batch ISO RC cast resin cable joint and branch off boxes made to reliably connect and branch off low voltage power cables: Proved suitability and quality since more than 30 years Optimized regarding occupational and environmental safety, contains 60% raw materials from renewable native sources Simple handling, few parts, precut gaskets Extensive advising and service ISO RC cast resincable joint boxes for applications up to 0,6 / 1 kV Quality controlled according to DIN/ISO/EN 9001/29001 Application The belly type cable boxes are designed to branch off and connect small to large consumers. Using PVC or VPE insulated cables and screw compact tap connectors. Design Divided, halogen free, hinged housing, especially designed to provide enough space for the tap connector. Parallel placed branch off cable, pre glued seals and pre cut gaskets which can be easily adjusted to cable size. Electrical and mechanical protection is achieved by RLSWtype cast resin ISO PUR K 2000 or fast curing ISOFILL A2. Mounting Branch off and main cable are connected with compact tap connectors or single connectors. The com plete mounted cable box is sealed via the large opening at the top of the cable box and afterwards closed with a sliding cap. The cable ditch may be closed quickly since the sealing compounds are fast curing systems. Delivery Housing, gaskets, sliding cap, mounting kit, cast resin, mounting instruction. The cast resin can be delivered in 2chamber bags or tins. Accessories Screw compact tap connectors, single connectors compression connectors.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190°C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50°C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 °C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test condition Test Method Value Unit Density ISO 1183 0.944-0.955 g/cm3 MFR 190°C/2.16kg ISO 1133 0.03-0.07 g/10min Tensile strength at yield ISO 527-2 22 MPa Elongation at break ISO 527-2 >350 % ESCR F50,50°C,100% ASTM D-1693A 1000 h VICAT ASTM D-1525 126 °C For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.
Item Test Condition Test Method Value Unit MFR 190°C/2.16kg ASTM D-1238 20 g/10min Density --- ASTM D-792 0.954 g/cm3 Tensile strength at yiled --- ASTM D-638 28 MPa Elongation at break --- ASTM D-638 250 % Impact tensile strength --- ASTM D-1822 42 kJ/m2 ESCR ASTM D-1693 3 --- VACIT --- ASTM D-1525 127 °C
BLCO 1M BARRELS/MONTH CIF ASWP SBLC COMMERCIALLY COMPETITIVE TERMS
Post consumer PET bales are processed on site , We have a production line capable of producing 4000 tons of rPET flake per month. We have an in house lab testing facility to ensure consistency between batches and to spot contamination.
HDPE Film Grade
PVC SG5
SCRAP METAL CLEARANCE COMPANY LIMITED is a leading manufacturer of ferrous and non-ferrous scrap metals in Hartley, Plymouth, United Kingdom with our head quarter in United States of America and we are the leading supplier of metal scraps and recycling in the Scrap market and we have the best quality of HMS 1 contact us for more infor if need be thanks for your patronage
SCRAP METAL CLEARANCE COMPANY LIMITED is a leading manufacturer of ferrous and non-ferrous scrap metals in Hartley, Plymouth, United Kingdom with our head quarter in United States of America and we are the leading supplier of metal scraps and recycling in the Scrap market and we have the best quality of LDPE contact us for more infor if need be thanks for your patronage
SCRAP METAL CLEARANCE COMPANY LIMITED is a leading manufacturer of ferrous and non-ferrous scrap metals in Hartley, Plymouth, United Kingdom with our head quarter in United States of America and we are the leading supplier of metal scraps and recycling in the Scrap market and we have the best quality of HDPE contact us for more infor if need be thanks for your patronage
SCRAP METAL CLEARANCE COMPANY LIMITED is a leading manufacturer of ferrous and non-ferrous scrap metals in Hartley, Plymouth, United Kingdom with our head quarter in United States of America and we are the leading supplier of metal scraps and recycling in the Scrap market and we have the best quality of Pet Bottle contact us for more infor if need be thanks for your patronage
PET Bottle Scrap in Bale We have the plastic pet bottle scrap clean and clear. Clear pet bottle scrap PVC content: less than 0.03%. Moisture: 1% max. Impurity: 0.02% max., Viscosity: 0.75n. Melting point: 256oc.
Polyvinyl Chloride(PVC) PVC is called poly vinyl chloride, the main ingredients of PVC; it has the bright-colored, corrosion-resistant and durable property. It is often add some plasticizers, anti-aging agent, and additively in the process to enhance its heat resistance, toughness, scalability and so on. All kinds of PVC granules, such as rigid, soft, clear and various colors are available. They are used in extrusion, injection and so on, for PVC profile, PVC frame, pipe, seal raw material. Application Division according to application: 1.Building materials: such as PVC tubing, PVC pipes, panel and section bars. 2.Packing materials. 3.Electronic materials: such as electronic wires, cables,adhesive tapes and bolts. 4.Furniture and ecorating materials,etc. 5.Others: leatheroid, medical disposable products, antiseptic paint,etc.
Polyester chips usually refers to the polyester raw materials obtained from the polymerization production is generally processed into about 4 * 5 * 2 mm or so sheet particles. 1. According to the composition and structure can be divided into: blended, copolymerization, crystalline, liquid crystal, cyclic polyester chips and so on; 2. According to the performance can be divided into: coloring, flame retardant, antistatic, moisture absorption, anti-pilling, antibacterial, whitening, low melting point, viscosity (high viscosity) polyester chips, etc.; 3. According to the use can be divided into: fiber grade polyester chips, bottle grade polyester chips, film grade polyester chips (mainly different process indicators). Fiber grade polyester chips according to which the content of matting agent tio2 can be divided into: super glossy (big glossy), glossy, semi-matte, (full) matte polyester chips. There are also cationic polyester chips. Polyester applications now include fibers, various types of containers, packaging materials, films, films, engineering plastics, and other fields.
Expandable Polystyrene(EPS) EPS(Expandable Polystyrene) is a lightweight, rigid, plastic foam insulation material produced from solid particles of polystyrene. Expandsion is achieved by virtue of small amounts of pentane gas dissolved into the polystyrene base material during production.The gas expands under the action of heat, applied as steam, to form perfectly clesed cells of EPS. Application Expanded polystyrene with relatively low density (1.05 g/cm3), low thermal conductivity, low water absorption, impact resistance,heat insulation, sound insulation, moistureproof, vibration damping and excellent dielectric properties, widely used in mechanical equipment, instruments and meters, household electric, crafts and other valuable products easily damaged, shockproof packaging materials as well as the fast food packaging
POE plastic is a thermoplastic elastomer in situ polymerization of ethylene and octene using metallocene catalyst. Its characteristics are as follows : (1) the soft crimped chain structure of octene and the crystalline ethylene chain as physical cross-linking point, which makes it both excellent toughness and good processability. (2) There is no unsaturated double bond in the molecular structure of POE plastic, which has excellent aging resistance. (3)POE plastic has narrow molecular weight distribution and good compatibility with polyolefin. (4) Good fluidity can improve the dispersion effect of filler, but also improve the strength of fusion mark products.
Product description INEOS produces highly versatile Polypropylene Impact Copolymer grades for extrusion, thermoforming, injection and blow molding applications. The grade portfolio covers a melt flow (MFI) range from fractional melts to 100 (g/10 min. at 2.16kg). The proprietary Innoveneâ?¢ P gas phase production process combined with state-of-the-art catalysts allows for the creation of an innovative PP portfolio
Product name:hd polyethylene lldpe linear low density polyethylene ldpe lldpe granules injection grade PP/PVC/ABS/PE Appearance:Linear low density polyethylene is a non-toxic, tasteless, odorless milky white particle with a density of 0.918~0.935g/cm3. Application:At present, lldpe plastic is mainly used in the field of film and packaging, through extrusion and blow molding process to produce plastic bags, garbage bags, industrial lining, agricultural film, protective film, etc., but also through injection molding and rotoplastic production process to make toys, refrigerated appliances, chemical reaction tanks, waste storage boxes and so on.
