High quality branded paint, comes with full specifications and paperwork, sold in all measures up to 1000lt ibc. 1000lt ibc, weight 1 ton.
Features may include: Powering Your Boat from 115 H.O. to 300 HP E-TEC G2 Best In Class fuel economy E-TEC Direct Injection Fuel Technology V6 from 150 H.O. to 300 HP Power Steering Available in white or gray, plus color panels Engine Engine Type V6 66 E-TEC G2 D.I. Bore 3.39 in (86 mm) Stroke 3.10 in (78.7 mm) Displacement 167 Cu in (2.7 cc) Throttle 5000-6000 RPM Gear Ratio (Primary) 2.17:1 Steering Tie Bar/Remote Electric Starter Electric Alternator 133 Amps Total / 50 net Dedicated / 14 amps @ idle Fuel System Fuel System E-TEC Direct Injection with stratified low RPM combustion mode Dimensions Length Shaft: 25 in (635 mm) Weights Weight 512 lbs (233 kg) Features Features Controls: Slate Gray
Supplier of synthetic lubricants, compressor lubricants and industrial oils..
Inch Deck Screws: Deck screws are screws specifically designed for use in outdoor decking projects. They are usually corrosion-resistant to withstand exposure to the elements. The "inch" specification likely refers to the length of the screws.
Paint, thinners, marine, paint, metal paint, PVA, primers, varnish, wood coatings.
The CPI -1519 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to give negligible solubility or dilution in hydrocarbon gases These compressor lubricants feature excellent protection against hydrogen sulphide (H2S) within the gas stream. Corrosion protection, low pour point and excellent lubricity ensure that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI-1519 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and negligible dilution with hydrocarbons means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service intervals. Applications and Compressor Type Flooded rotary screw compressors Centrifugal compressors Liquid ring vacuum pumps Features and Benefits Hydrocarbon insoluble Insignifi cant dilution in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased efficiency, reduced cost of operation
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminum surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced downtime Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Soles 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest�® 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
Solest 170 is a formulated VG170 synthetic polyol ester (POE) lubricant designed for commercial and industrial refrigeration and air conditioning compressors with over 25 years of service in the field. Designed to maximize lubrication in HFC systems, Solest 170 provides superior bearing protection with greater film strength than standard HFC lubricants. This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency. Solest lubricants are designed for standard factory fill of air conditioning and industrial refrigeration equipment, as well as for OEM retrofitting operations. CPI's laboratory studies and OEM compressor bench tests have afforded a product line specifically designed to meet key system needs. Solest lubricants are not hazardous under 29 CFR 1910.1200. They provide improved properties over conventional mineral oils in all aspects, including viscosity index, flash and fire points and pour point. Applications and Compressor Type HFC, HCFC, HFO Refrigeration Reciprocating, Screw, Centrifugal Compressors Features and Benefits Thermally stable Longer system life Improved oil management Efficiency gains Corrosion protection Enhanced system reliability and reduced down-time Excellent bearing lubrication Longer compressor Life Optimized System performance Reduced operating costs Environmentally friendly Biodegradable Excellent lubricity Increased efficiency, reduced cost of operation Outstanding Miscibility The performance of an HFC system is optimized when the lubricant and refrigerant mix to form a single, clear phase. Miscibility lowers the viscosity of the lubricant carried through the system, so the lubricant can more efficiently return to the compressor. Mineral oils are not miscible with HFCs whereas Solest 170, as a polyol ester has a controlled level of miscibility with HFC gases. Excellent Thermal Stability Sealed tube results (ASHRAE 97) indicate that Solest 170 provides excellent stability in the presence of HFC refrigerants. In addition to outstanding stability, this lubricant shows no adverse effects to metals and other materials of construction.
The CPI -4600 Series compressor lubricants are formulated using premium polyalphaolefi n (PAO) synthetic base fluid, coupled with a high performance additive package. These compressor lubricants feature excellent thermal and oxidation stability enabling them to operate over a wide range of temperatures without coking, deposit formation or corrosion. The lubricants have low volatility and exhibit excellent miscibility with hydrocarbon gas and good compatibility with mineral oil lubricants. The CPI -4600 Series are recommended for refrigeration services due to excellent low temperature properties. They are wax-free as they are synthetic. A low pour point prevents lubricants from congealing in refrigeration lines. High film strength provides lubricity even when diluted with refrigerant. Applications and Compressor Type Propylene Refrigeration Oil-flooded rotary screw compressors Liquid ring vacuum pumps Other applications requiring an oxidative and thermally resistant lubricant Features and Benefits Hydrocarbon miscibility Work well with hydrocarbon gas in industrial refrigeration systems Oxidatively stable Longer system life Low volatility Reduced maintenance, reduced top-up High viscosity index Wide temperature range of operation Excellent lubricity Increased efficiency, reduced cost of operation
The CPI -1516 Series compressor lubricants are formulated using premium polyalkylene glycol (PAG), coupled with a high performance additive package. The lubricants are specifically formulated to ensure shear stability, corrosion protection, and excellent lubricity. These compressor lubricants feature excellent protection against yellow metal staining by careful selection of a combination of corrosion inhibitors. This, coupled with unparalleled oxidative and thermal stability ensures that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. The CPI -1516 Series are specifically advantageous in high-temperature applications, particularly as the low volatility and high viscosity index means that there is significantly reduced lubricant in the gas stream, ensuring that the use of these lubricants over a wide range of applications and systems will result in a long, trouble-free and uninterrupted service interval. Applications and Compressor Type Flooded rotary screw compressors Propane refridgeration Features and Benefits Corrosion protection (yellow metals) Enhanced system reliability and reduced down-time Oxidatively stable Longer system life Extremely low volatility Reduced maintenance, reduced top-up Excellent lubricity Increased effi ciency, reduced cost of operation High viscosity index Satisfactory use over wide range of operational temperatures
The CPI-1508 Series compressor lubricants are formulated using a polyalkylene glycol (PAG) base fluid combined with a high performance additive package. These lubricants are specifically formulated to give negligible dilution with hydrocarbon gases. These compressor lubricants feature excellent protection against hydrogen sulfide (H2S) in the gas stream. Corrosion protection, oxidative and thermal stability enable the use of these lubricants over a wide range of temperatures without varnish or deposit formation. The high viscosity index (VI) and negligible hydrocarbon dilution enables the CPI-1508 Series lubricants to operate over wide ranges of temperature and gas composition with small changes in viscosity compared to other types of lubricants. The CPI-1508 Series fluids are especially advantageous in compressors operating in harsh chemical environments, particularly sour gas (H2S present) applications, due to their robust formulation. Applications and Compressor Type Flooded rotary screw compressors Sour gas applications Heavy hydrocarbon gas stream applications Features and Benefits Hydrocarbon insoluble Negligible dilution due to hydrocarbons in operation Corrosion protection (H2S) Resistance against H2S corrosion Oxidatively stable Longer system life High viscosity index Small viscosity changes over wide temperature ranges
Automotive and marine industry paint and liquid coating.
Application Office / Home / School / Hospital / Factory More Details Model EXTERIOR LATEX PAINT WATERPROOF COATING PAINT RUBBER WATERPROOF PAINT MULTIFUNCTIONAL WATER-BASED METALLIC PAINT Formulation Acrylic paint Acrylic paint Acrylic paint Acrylic paint Color White, black, greym clear White, black, greym clear White, black, greym clear White, black, greym clear Application General purpose for� Office/Home/School/Hospital/Factory Bathroom/Kitchen/Roof Floor/Swimming Pool Bathroom/Kitchen/Roof Floor/Swimming Pool Steel Structure/Ship Deck/Iron Fence Feature High coverage, Easy construction, Antibacterial, Mildew proof, Colorful
Nanotecnology paints coatings building materials cleanings powder coatings marine paints.
* price Negotiable Trustex gloves are premium nitrile gloves that are perfect for various applications. With their superior durability, Trustex nitrile gloves provide excellent hand protection without compromising on comfort. Trustex gloves provide exceptional protection and dexterity, with textured fingertips for added grip. Crafted from premium nitrile material, these gloves are latex-free, which reduces the risk of allergies and irritation. They are also powder-free, eliminating the mess and discomfort associated with traditional powdered gloves. Suitable for industrial work, food handling, or general-purpose use. Trustex disposable nitrile gloves are trusted for reliable performance, quality, and peace of mind. Available in three sizes: small, medium, and large. Suitable for a variety of minimal risk activities including but not limited to: Cleaning, Beauty Therpay, Parts Handling, Painting and Finishing Services, Food Preparation, Tattoo Care, Pet Care, Child Care, Technicians, Mechanic, Hair Dressing Features Include: Latex-Free Powder-Free Chemical Resistant Nitrile Fingertip Textured and Beaded Cuff Reduces risk of allergy Tough & Flexible (Quality & Strength) Good resistance Food Safe Non-Sterile Single-use ambidextrous gloves Trustex Nitrile Gloves are also tested according to ISO 21420:2020 and Cat 1 according to: PPER (EU) 2016/425 Trustx gloves meet AQL 1.5 as per EN455 and ASTM prescribed standards Manufactured by Karex, the world's largest condom manufacturer
Kelvin marine engine 1 8 cylinder 500hp with gearbox 1 8 cylinder 400hp wiyh gearbox 2 6 cylinder
Kelvin marine engine 8 cylinder turbo with gearbox
Top-Quality Plywood for Sale Multiple Types and Grades Available Types of Plywood: Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing. Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures. Tropical Plywood: Best for marine construction and exterior furniture. Flexible Plywood: Great for curved surfaces and architectural elements. Marine Plywood: Built for boat building and outdoor structures. Fire-Retardant Plywood: Essential for safety-critical applications in public buildings. Grades Available: A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture. B-Grade: Solid surface with few knots, suitable for furniture and shelving. C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important. D-Grade: More knots and defects, great for construction and underlayment. Specifications: Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use Face Veneer: Available in smooth or textured finishes, depending on grade and type Applications: Construction: Ideal for walls, roofs, and flooring. Furniture: Perfect for creating tables, chairs, and cabinets. Cabinetry: Suitable for kitchen units, wardrobes, and shelving. Marine Use: Excellent for boat building, docks, and piers. Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available Types of Plywood: Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing. Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures. Tropical Plywood: Best for marine construction and exterior furniture. Flexible Plywood: Great for curved surfaces and architectural elements. Marine Plywood: Built for boat building and outdoor structures. Fire-Retardant Plywood: Essential for safety-critical applications in public buildings. Grades Available: A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture. B-Grade: Solid surface with few knots, suitable for furniture and shelving. C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important. D-Grade: More knots and defects, great for construction and underlayment. Specifications: Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use Face Veneer: Available in smooth or textured finishes, depending on grade and type Applications: Construction: Ideal for walls, roofs, and flooring. Furniture: Perfect for creating tables, chairs, and cabinets. Cabinetry: Suitable for kitchen units, wardrobes, and shelving. Marine Use: Excellent for boat building, docks, and piers. Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available Types of Plywood: Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing. Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures. Tropical Plywood: Best for marine construction and exterior furniture. Flexible Plywood: Great for curved surfaces and architectural elements. Marine Plywood: Built for boat building and outdoor structures. Fire-Retardant Plywood: Essential for safety-critical applications in public buildings. Grades Available: A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture. B-Grade: Solid surface with few knots, suitable for furniture and shelving. C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important. D-Grade: More knots and defects, great for construction and underlayment. Specifications: Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use Face Veneer: Available in smooth or textured finishes, depending on grade and type Applications: Construction: Ideal for walls, roofs, and flooring. Furniture: Perfect for creating tables, chairs, and cabinets. Cabinetry: Suitable for kitchen units, wardrobes, and shelving. Marine Use: Excellent for boat building, docks, and piers. Decorative: Great for wall paneling, partitions, and ceiling panels.
