Wood pellet pine , 6-8mm
We supply Diesel Fuel 100 ppm EN 590 on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery. Send us an LOI to info@odissiglobal.com The EN 590 standard is the European diesel fuel specification for low sulphur content diesel and describes the properties diesel fuel must meet if it is to be used in automobiles. This specification of diesel is the grade required by a diesel-engine road vehicle (DERV) and the majority of agricultural machinery.
Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60C Maximum 460 micrometers Copper Strip Corrosion (3h @ 50C) Class 1 Oxidation Stability @ 110C Minimum 20 hours FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 microns
Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi
Charcoal
Wood pellets are a renewable resource, the fuel that is already widely available in the world nowadays. The wood shavings are compressed under great pressure and forced through holes. This is a hot process and the natural lignin in the sawdust/wood shavings melts and binds the dust together, holding the pellet in shape and giving it that characteristic sheen on the outside. Top quality wooden pellets natural pressed solid fuel wholesale prices, wood pellet in bulk Calorific value ca. 49kW/h per kg, Bulk density not less 600 kg/m3, Diameter 8 mm, Length 5-40 mm. Total moisture as received max 10%, Ash 0,5 %, Melting ashes not less 1200 Co, Moisture content 10%, Mechanical Durability 98%.
We're a UK based company.. We presenting a Genuine SELLER / TITLE HOLDER who can supply Jet A1 Fuel, ULSD Diesel EN590, Unleaded Gasoline and Fuel Oil (CST 180/380) ..... ORIGIN: EUROPEAN .... Price: Platts minus 7% ... The Seller can supply as CIF, STS and Vessel Take Over. The Seller is The OWNER and the TITLE HOLDER ... SBLC MT760 is accepted as a guarantee only as NON-TRANSFERABLE, NON-OPERATIVE and is issued to the SELLER .. We're looking for RWA buyers... MOQ is 50,000 MT for EN590, FUEL OIL, and Gasoline, and 2M bbl for Jet A1 Fuel .... Contact: Usama
Oil and gas commodities: crude, jet fuel, d6, en590, d2, mazut, petcoke, urea 46, coal, lng, lpg agricultural commodities: sugar (including icumsa 45, 150, etc), wheat, edible oils, wheat, corn, soya and soya products, meat.Corporate representation, business consulting, intermediation, brokering, agency.
* Quantity MIN 50,000MT x 12 months * Origin: German Origin Specifications: The products are in accordance with the specifications requested by The Buyer or presented by The Seller. * Payment: By MT103/760 * Price/Commissions: Final price to Buyer is the Gross, including all commissions. * Payment is then made by Seller, who carries out all commissions transfers. *Contract: 12 Months with possible rollovers. * Inspection: SGS or similar * CIF SBLC PROCEDURE - Summary of our procurement process:- 1. Buyer issue an RFP (Per attached template -w- specification sheet) 2. We issue a commercial offer with all relevant tacit data 3. Buyer returns signed commercial offer in conjunction with a Banker Signed RWA letter (Verbiage will be attached in the commercial offer) 4. Seller issues the Sales & Purchase Agreement 5. The Contract is formalized and lodged with respective bankers 6. Buyer's Banker issues a Pre-Advice MT799 7 Seller issues the Price Lock Notice (a discount is set on this day per the Platts Assessment of the day) 8. Buyer Banker issues the collateral (MT760) 9. Seller's Banker issues 2% Performance Bond 10. Seller charters the vessel/barges 11 Seller berths the vessel/barges 12. Seller loads the vessel/barges 13. Seller issues Product & Shipping Documentation (Digitally AND via courier) 14. Vessel/Barge departs for destination
CIF Procurement Process - Min. Qty is 50,000 MT for all products except Jet Fuel with Min. Qty of 2M BBL and Min Contract Period is 12 months. 1.1. The Seller Issues A Commercial Offer. - The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 1.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (Rwa) Letter Stating To Issue A Collateral Instrument On Behalf Of The Buyer. 2. Sales Agreement 2.1. The Seller Issues The Sales & Purchase Agreement. - The Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. - The Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 3. Formalization/banking 3.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 3.2. The Sales & Purchase Agreement Is Lodged With The Buyers And The Sellers Bank. 3.3. The Buyers Banker Transmits A Pre-advice Via Swift Mt799. 3.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift Mt760. 3.5. The Seller's Banker Issues A 2% Performance Bond. 3.6. Within 7 Days Of Verification Of The Collateral Instrument, The Seller Issues A Specially Curated Insurance Policy From Llyods Of London For 110% Of The Value. 4. Loading/documentation 4.1. Subsequent To The Validation Of The Collateral Instrument, The Seller Loads The Vessel (At Own Expense) And Issues The Product & Delivery Documentation. Product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Not Limited To: 1. Charter Party Agreement 2. Vessel Questionnaire 88 3. Vessel/product Insurance Policy (Lloyds) 4. Commitment To Supply 5. Commercial Invoice 6. Statement Of Product Availability 7. Certificate Of Origin 8. Bill Of Lading 9. Cargo Manifest 10. Ullage Report 11. Certificate Of Quality(Sgs At Origin) And Notice Of Readiness 12. Eta To Destination, Etc. The Buyer May Track And/or Communicate With The Vessel At Their Convenience. 5. Delivery/discharge 5.1. Per Standard Shipping Protocols, The Shipper Contacts The Buyer And Target Harbormaster Within A 48-hour Arrival Date/time. 5.2. The Seller Issues The Authorization To Board (Atb) And The Dip Test Authorization (Dta). 5.3. Customs Will Accompany The Buyer Per Local Rules. 5.4. The Buyer Executes An Mt103 Wire Transfer Subsequent To The Quality/quantity Inspection And In Accordance To The Final Invoice. 5.5. The Seller Transfers The Certificate Of Ownership (Title) Subsequent To The Receipt Of Payment. 5.6. Shore Tanks Are Injected Per The Harbormasters Directives.
Refined/produced In Germany, Not Re-documented - Min. Qty Is 50,000 Mt For All Products Except Jet Fuel With Min. Qty Of 2m Bbl And Min Contract Period Is 12 Months. Ship To Ship Transfer (Sts) Procurement Process 1.1. The Seller Issues A Commercial Offer. - The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 1.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (Rwa) Letter Stating, The Banker Shall Issue A Collateral Instrument On Behalf Of The Buyer. 1.3. The Seller Issues An Authorization To Verify (Atv), Which Is Transmitted Between Bankers. -the Atv Is To Validate/confirm The Sellers: A) Liquidity. B) Hydrocarbon Trading Experience. 2. Sales Agreement 2.1. The Seller Issues The Sales & Purchase Agreement. -the Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. -the Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 3. Formalization/banking 3.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 3.2. The Sales & Purchase Agreement Is Lodged With The Buyer's And The Seller's Bank. 3.3. The Buyer's Banker Transmits A Pre-advice Via Swift Mt799. 3.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift Mt760. 3.5. The Seller's Banker Issues A 2% Performance Bond. 4. Loading/documentation 4.1. Subsequent To The Validation Of The Collateral Instrument, The Seller Loads The Vessel (At Own Expense) And Issues The Product & Delivery Documentation. -product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Is Not Limited To, Charter Party Agreement, Vessel Questionnaire 88, Vessel/product Insurance Policy (Lloyds), Commitment To Supply/commercial Invoice, Statement Of Product Availability/certificate Of Origin, Bill Of Lading/cargo Manifest, Ullage Report, Certificate Of Quality, Notice Of Readiness/eta To Destination, Etc. -the Buyer May Track And/or Communicate With The Vessel At Their Convenience. 5. Delivery/injection 5.1. Per Standard Shipping Protocols, The Shipper Contacts The Buyer Within A 48-hour Arrival Date/time. 5.2. The Seller Issues The Authorization To Board (Atb) And The Dip Test Authorization (Dta). 5.3. The Buyer Executes An Mt103 Wire Transfer Subsequent To The Quality/quantity Inspection And In Accordance To The Final Invoice. 5.4. The Seller Transfers The Certificate Of Ownership (Title) Subsequent To The Receipt Of Payment. 5.5. Injection Process Commences. [fuel Is Injected Into The Buyer's Vessel(S)]
Min. Qty is 50,000 MT for all products except Jet Fuel with Min. Qty of 2M BBL and Min Contract Period is 12 months. FOB GERMANY: VTO (Vessel TAKE OVER) PROCUREMENT PROCESS 1. REQUEST 1.1. The Buyer Issues A Letter Of Interest Or The Request For Product Application. - The Letter Of Interest Or The Request For Product Application Shall Consist Of Product Name, Volume, Discharge/retrieval Port, Specification(s), Collateral Instrument Issuing Bank Name, Company Information, Etc. 2. Commercial Offer 2.1. The Seller Issues A Commercial Offer. -The Commercial Offer Exhibits Information Such As Specific Prices, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Etc. 2.2. The Buyer Formalizes And Returns The Commercial Offer In Conjunction With A Banker Signed Ready Willing And Able (rwa) Letter Stating, The Banker Shall Issue A Collateral Instrument On Behalf Of The Buyer. 3. Sales Agreement 3.1. The Seller Issues The Sales & Purchase Agreement. -The Sales & Purchase Agreement Exhibits Information Such As Price, Index Discount, Volume, Load/discharge Ports, Delivery Timeline, Product Specifications, Banking Coordinates, And Other Tacit Data. -The Delivery Timeline Is Contingent On The Volume, Load/discharge Ports, And Vessel Availability. 4. Formalization/banking 4.1. The Buyer Formalizes And Submits The Sales & Purchase Agreement Within (3) Business Days. 4.2. The Sales & Purchase Agreement Is Lodged With The Buyer's And The Seller's Bank. 4.3. The Buyer's Banker Transmits A Pre-advice Via Swift MT799. 4.4. The Buyer's Banker Transmits The Collateral Instrument Via Swift MT760. 4.5. The Seller's Banker Issues A 2% Performance Bond. 5. Loading/documentation 5.1. Subsequent To The Validation Of The Collateral Instrument, The Sellerloads The VESSEL (At Own Expense) And Issues The Product & Delivery Documentation. -Product & Delivery Documentations Are Submitted Digitally And Via Courier When Created. Documentation Comprises Of, But Not Limited To; Charter Party Agreement, Vessel Questionnaire 88, Vessel/product Insurance Policy (lloyds), Commitment To Supply/commercial Invoice, Statement Of Product Availability/certificate Of Origin, Bill Of Lading/cargo Manifest, Ullage Report, Certificate Of Quality, Notice Of Readiness/eta To Destination, Etc. -The Buyer May Track And/or Communicate With The Vessel At Their Convenience. 6. Delivery/discharge 6.1. The Seller Issues The Authorization To Board (ATB) And The Dip Test Authorization (DTA). 6.2. The Buyer Executes An Mt103 Wire Transfer Within 24 Hours Subsequent To The Quality/quantity Inspection (optional) And In Accordance With The Final Invoice. 6.3. The Seller Transfers The Certificate Of Ownership (title) Subsequent To The Receipt Of Payment. 6.4. The Buyer Takes Over The Vessel. 6.5. Vessel Departs
Diesel
Wood Pellet
Coal .
PETROLEUM COKE Maximum Quantity: 50,000MT per Month CIF Price: USD $200.00MT/USD $190.00 NET on CIF TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
DIESEL EN590 Minimum Quantity: 5000 metric tons CIF price: GROSS USD $420.00 MT NET: USD $410.00 MT TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Diesel Gas D2 Oil Gost 305-82 Minimum Quantity: 5000 Metric Tons per Month Maximum Quantity: 50,000 Metric Tons per Month CIF Price: Gross USD $400.00MT NET / USD $390.00MT on CIF FOB Price: Gross USD $390.00MT NET / USD $380.00MT on FOB TERMS OF NEGOTIATION ORIGIN: FEDERAL REPUBLIC OF NIGERIA INCOTERMS: CIF/FOB/TTO LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT TERMS: SBLC-MT760, MT103 PERFORMANCE BOND: 2% PB CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS) INSPECTION: SGS, CIQ OR SIMILAR COMMISSION: STRUCTURED NCNDA/IMFPA FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION) 1. Buyer sends ICPO in line with seller working procedures 2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity. 3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days. 4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: - SGS report, Pre- Injection Report, Commitment Letter to Supply Authorization to sell & collect. 5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel. 6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value 7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction. 8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.
Reliable supply of En 590 available direct from refinery ex Rotterdam and Houston. Competitive pricing . TTT , TTV and CIF procedures available . Please note no changes can be made to the procedures
Fuels, greases, lubricants, oils such as charcoal, coal, coke, fuel wood, naphtha, crude petroleum, crude oil, diesel fuel, gasoline, fuel oil, heating oil, kerosene, liquefied petroleum gases, butane and propane gas, lubricating oils and greases, refined petroleum.
