British Flooring Strips Suppliers and Manufacturers

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

Accu-Chek test strips are essential components of blood glucose monitoring for individuals with diabetes. These strips are designed to work seamlessly with Accu-Chek blood glucose meters, enabling accurate and reliable measurement of blood sugar levels. The strips utilize advanced technology to require only a small blood sample, making the testing process more comfortable. With rapid and precise results, Accu-Chek test strips empower users to effectively manage their diabetes by providing valuable insights into their current glucose levels. This user-friendly and indispensable tool plays a crucial role in facilitating proactive health management for individuals living with diabetes.

Wholesale GlucoRx Nexus Strips - 50 available Contact now for more details Serious inquiries only, please

The Accu-Chek Performa Test Strips are used in conjunction with Accu-Chek Performa blood glucose meters. These test strips are an essential component for monitoring blood glucose levels in individuals with diabetes. Here are some key points about Accu-Chek Performa Test Strips: Compatibility: Accu-Chek Performa Test Strips are specifically designed to work with Accu-Chek Performa blood glucose meters. Blood Glucose Monitoring: These test strips are used to measure the concentration of glucose in a small blood sample. This helps individuals with diabetes manage their blood sugar levels. Quick Results: The test strips provide rapid and accurate results, allowing individuals to monitor their blood glucose levels conveniently at home. Capillary Action Technology: The strips often use capillary action technology, which helps to draw in a precise amount of blood for the test. Coding: Some blood glucose test strips require manual coding to match the code on the test strip vial with the code on the meter. It's important to follow the specific instructions provided by the manufacturer regarding coding. Storage: Proper storage of test strips is essential for accurate results. Test strips are typically stored in a cool, dry place, and users should check the expiration date before use.

Wholesale Breathe Right Nasal Strips, Size Large, Pack of 30 Contact now for more details Serious inquiries only, please

Wholesale Accu Chek Aviva Test Strips - 50 Contact now for more details Serious inquiries only, please

Contour Next Glucose Test Strips - 50 available Contour Next Glucose Test Strips - 50

High-Quality Birch Wood Logs and Lumber for Sale Birch Wood Logs Species: Silver Birch (Betula pendula), Yellow Birch (Betula alleghaniensis) Grade: Prime, Standard, Industrial Diameter: 250 mm to 800 mm Length: 2.4 meters to 5.0 meters Birch Wood Lumber Type: Edged and Unedged Grade: FAS, Select & Better, #1 Common, #2 Common Thickness: Rough Sawn: 25 mm, 32 mm, 38 mm, 50 mm, 63 mm, 75 mm, 100 mm Finished: 20 mm, 25 mm, 30 mm, 40 mm, 50 mm, 60 mm, 80 mm Width: Edged: 100 mm to 300 mm Unedged: Random widths Length: 2.0 meters to 5.0 meters Characteristics Color: Light yellow to pale white, sometimes with a reddish hue Grain: Straight with a fine, even texture Density: Approximately 0.65 g/cm�³ Hardness: Janka hardness of about 1,260 lbf (5,600 N) Moisture Content: Typically dried to 8-12% for indoor use, 12-15% for outdoor use Applications Furniture: Chairs, tables, cabinets Flooring: Durable and attractive hardwood flooring Plywood: Commonly used in the manufacture of high-quality plywood Turnery: Handles, toys, and other turned objects

Premium Ash Wood Logs and Lumber for Sale Logs: Species: White Ash (Fraxinus americana), European Ash (Fraxinus excelsior) Grade: Prime, Standard, Industrial Diameter: 10 inches to 40 inches Length: 8 feet to 16 feet Lumber: Grade: FAS, Select & Better, #1 Common, #2 Common Thickness: 4/4, 5/4, 6/4, 8/4, 10/4, 12/4, 16/4 Width: 4 inches to 12 inches (random width) Length: 6 feet to 16 feet Characteristics: Beautiful light to medium brown heartwood with pale sapwood Straight grain with a coarse, uniform texture High flexibility and shock resistance Applications: Perfect for high-quality furniture, durable flooring, sports equipment, and millwork.

Product Offerings: 1. Hardwood Logs & Lumber: Perfect for furniture, flooring, cabinetry, and decorative uses. Species Available: Oak, Mahogany, Teak, Walnut, Maple, Ash, Cherry, and more. Log Dimensions: Diameter: 30-90 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: FAS, Select, #1 Common, #2 Common Moisture Content: Green, air-dried, or kiln-dried 2. Softwood Logs & Lumber: Ideal for construction, framing, and general-purpose applications. Species Available: Pine, Spruce, Fir, Douglas Fir, Cedar, and more. Log Dimensions: Diameter: 20-70 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: Construction, Industrial, Select Structural Moisture Content: Green or kiln-dried Key Features: Sustainably Sourced: All products come from certified sustainable forests. Custom Dimensions: Available upon request to suit specific project requirements. Certification: FSC and PEFC certified; Grading certificates available. Packaging: Bundled logs, palletized lumber, custom packaging available. Terms of Sale: MOQ: N/A Payment Terms: Secure payment via wire transfer, LC, or other. Shipping: Worldwide shipping by sea, land, or air. Delivery lead times from 2-6 weeks Incoterms: FOB, CIF, DDP available.

Product Offerings: 1. Hardwood Logs & Lumber: Perfect for furniture, flooring, cabinetry, and decorative uses. Species Available: Oak, Mahogany, Teak, Walnut, Maple, Ash, Cherry, and more. Log Dimensions: Diameter: 30-90 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: FAS, Select, #1 Common, #2 Common Moisture Content: Green, air-dried, or kiln-dried 2. Softwood Logs & Lumber: Ideal for construction, framing, and general-purpose applications. Species Available: Pine, Spruce, Fir, Douglas Fir, Cedar, and more. Log Dimensions: Diameter: 20-70 cm Length: 2-6 meters Lumber Dimensions: Thickness: 25mm, 38mm, 50mm, 75mm Width: 100mm+ Length: 2-6 meters Grades: Construction, Industrial, Select Structural Moisture Content: Green or kiln-dried Key Features: Sustainably Sourced: All products come from certified sustainable forests. Custom Dimensions: Available upon request to suit specific project requirements. Certification: FSC and PEFC certified; Grading certificates available. Packaging: Bundled logs, palletized lumber, custom packaging available. Terms of Sale: MOQ: N/A Payment Terms: Secure payment via wire transfer, LC, or other. Shipping: Worldwide shipping by sea, land, or air. Delivery lead times from 2-6 weeks Incoterms: FOB, CIF, DDP available.