British Bronze Alloy Suppliers and Manufacturers

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

3337871323622 CS DRY TOUCH IP50 T50ML 3337871323196 CS DRY TOUCH IP30 50ML 3337871325787 CS TINTED SPF50 T50ML 3337871324445 CS VELVET 50+ 50ML 3337875810890 CS SPRAY IP30 200ML 3337875695145 Eau Prot Hydra SPF50 200ML 3337875585187 Eau Prot Hydr SPF30 200ML 3337875695152 Eau Prot Bronz SPF50 200ML 3337875585217 Eau Pro Bronz SPF30 200ML 3337871322694 CS HYDRA LAIT IP50 T300ML 3337871321826 CS LAIT FAMILL IP30 T300ML8 3337871323639 CS LAIT ENFANT IP50 T300ML8 3337875695206 CS WET SKIN KID SPF50T200ML 3337871322724 Ã??S LAIT APSOLEIL T300ML Contact for more information

the Boston Scientific Promus Elite is a coronary drug-eluting stent system. It is designed for use in patients undergoing percutaneous coronary intervention (PCI) procedures to treat coronary artery disease. Here are some key features and points related to the Boston Scientific Promus Elite coronary stent: Drug-Eluting Stent: The Promus Elite is a drug-eluting stent (DES), meaning it is coated with medication to help prevent the re-narrowing (restenosis) of the treated coronary artery. Drug Coating: The stent typically features a polymer coating containing an anti-proliferative drug. This drug is slowly released over time to inhibit the growth of tissue inside the stent, reducing the risk of restenosis. Cobalt Chromium Alloy: The stent is often made of a cobalt chromium alloy, known for its strength and flexibility. This material allows for a thin stent strut design, which can be beneficial in terms of deliverability and conformability. Delivery System: The stent is delivered to the target area using a catheter-based delivery system. The catheter is guided through the blood vessels to the site of the coronary artery lesion. Radiopaque Markers: Radiopaque markers on the stent aid in proper placement and visualization under X-ray guidance during the procedure.

The EverFlex stent is designed for use in the treatment of peripheral arterial disease (PAD), specifically in the iliac arteries. Key features of the EverFlex Protege stent may include: Self-Expanding Design: The stent is self-expanding, meaning it can open and conform to the shape of the artery without the need for balloon inflation. Nitinol Construction: The stent is typically made of nitinol, a nickel-titanium alloy known for its flexibility and ability to maintain shape memory. Longitudinal Flexibility: The stent is designed to provide longitudinal flexibility, allowing it to adapt to the natural movement of the vessel. Iliac Artery Treatment: The EverFlex Protege stent is specifically indicated for use in the iliac arteries, which are located in the pelvis.

The Zimmer M/L Taper Hip Prosthesis is a product line from Zimmer Biomet, a company that specializes in orthopedic implants and devices. The M/L Taper Hip Prosthesis is used in hip replacement surgeries and consists of a femoral stem that is implanted into the patient's femur. The "M/L 12/14 Taper" designation likely refers to the taper of the femoral stem, with 12/14 indicating the taper size. The "Standard Offset" specification suggests a standard offset design for the femoral stem. The offset refers to the distance between the center of the femoral head and the center of the femoral stem. Standard offset is a common configuration, but there are also variations such as high offset or low offset stems to accommodate different patient anatomies. Key features and considerations for the Zimmer M/L Taper Hip Prosthesis may include: Material: The femoral stem is typically made of biocompatible materials such as titanium or cobalt-chromium alloy. Taper Design: The taper design facilitates the connection between the femoral stem and the femoral head component. Modularity: Some hip prostheses, including those with taper connections, offer modularity, allowing surgeons to choose different head sizes and neck lengths to optimize patient fit. Surgical Technique: Implantation involves removing the damaged part of the hip joint and replacing it with the prosthetic components. Range of Motion: The design aims to provide stability, durability, and a suitable range of motion for the patient.

Description by Manufacturer Chemical Composition: All Weight: 20/25kg per ingot Al (Min): 99.7%-99.9% Appearance: silvery white Aluminum ingot for remelting is produced by molten salt electrolysis method using alumina and cryolite. Products meet the national standard GB/T1196-2002. The surface of the ingot is clean and smooth.Applications:1. mainly used for melting ingot2. discontinuous melting with scrap3. easy control and operation4. fast melting5. Used for industry such as automobile,pinning and weaving,electron broadly and so onAl Content:99.7% minWeight: 20/25kg per ingot MOQ:1*20FCL( 25MT+-10% )Alloy Or Not:Non-alloy H.S.Code:7601101000

Aluminum Ingots /Aluminum ingot A7 99.7% and A8 99.8% /aluminium alloy ingot We are exclusively engaged with our expertise in offering a wide range of Aluminum Ingot. These Ingots are manufactured using the essential quality basic material. Our Ingots are well acknowledged for their enhanced durability. Offered completely manufactured Ingots are available in miscellaneous sizes at a very competitive price. Provided Ingots are checked as per the set parameters of the industry, before final dispatch. Features: â?¢ Durability â?¢ Sturdiness â?¢ Optimally finished Additional Information: Item Code: AI-01 Appearance : Silvery white Length : 740MM (+/- 10%) Width : 170MM (+/- 10%) Thickness : 90MM (+/- 10%) weight of one ingot : 25KG (22-25 KG) Quality : AL 99.70, AL 99.50, AL 99.00 Packing 25KG/INGOT, 1000KG or 1050KG/bundle, or as your recquirment

Aluminum Wheel Scrap Technical Process (Mould Designing Mould Cutting Mould Testing Mould Workshop Mould Heating) Extruding (Aluminium Ingot&Supplementary Materials Smelting Homogenizing Bar Heating ) Aluminum wire scrap Composition: Si : 0.2-0.6% Fe : 0.35% Cu : 0.1% Mn :0.1% Mg : 0.45-0.9% Cr :0.1% Zn :0.1% Application: Aluminum alloy production , Steel making and requirements of the coating is not high Fireworks production 1.mainly used for melting ingot 2.discontinuous melting with scrap 3.easy control and operation 4.fast melting 5.energy saving This Scrap Aluminium is produced in the production of industrial waste.Such as:Scrap Aluminium Wire,Scrap Aluminium block and so on. We offer the clients with quality Aluminium Scrap that is used in various industries for making new aluminium products. Our range of Aluminium Scraps is free from unwanted content and corrosion resistant in nature thus highly demanded in the domestic.(EL)

Alloy Or Not: Non-alloy Secondary Or Not: Non-secondary Al (Min): 99.95% Color: Red gold Supply Ability:5000 Ton/Tons per Month Packaging Details: 1 ton bag standard export package or as required by customer Port: USA Specification: Wire diameter: 0.20mm, 0.25mm, 0.30mm Weight: 3kg, 5kg, 7kg, 15kg, 20kg Purity: 99.95% min Supply Ability: 5000 Metric Tons per Month.