Papers for laser printing, photocopiers, & facsimiles & packaging.
Flexible Intermediate Bulk Containers.
Auto spare parts for all makes and models half cuts, nose cuts, engine & gearboxes, suspension parts, body panels., ship containers.
Copper cathode SPECIFICATIONS: DIMENSIONS 914MM X 914MM X 12MM WEIGHT PER SHEET 125KG (+/- 1%)   NET WEIGHT PER PALLET 2MT APPROXIMATELY MINIMUM WEIGHT IN EACH CONTAINER 25MT APPROXIMATELY GROSS WEIGHT OF EACH CONTAINER 27.2MT APPROXIMATELY PACKAGING PALLETIZED, ALUMINUM BAND COPPER CATHODE CHEMICAL ANALYSIS CU 99.99-99.97% BASIS, REJECTION BELOW 99.97 INSPECTION: SGS or CCIC or Similar; OTHER ELEMENTS Silicate (Si) 0.3ppm Tellurium (Te) 0.5ppm Cobalt (Co) 0.2ppm Silver (Ag) 10ppm Lead (Pb) 0.2ppm Selenium (Se) 0.3ppm Iron (Fe) 2ppm Sulphur (S) 4ppm Aluminum (Al) 0.5ppm Magnesium (Mg) 0.4ppm Manganese (Mn) 0.5ppm Oxygen (O2) 0.00ppm Nickel (Ni) 0.2ppm Non Radioactivity Antimony (Sb) 0.1ppm Arsenic (As) 0.1ppm Bismuth (Bi) 0.1ppm Bill of lading: The official document, issued at the load port after completion of the loading operations, stating among other things, the shipâ??s loaded quantity, expressed in Cubic Meters (M3) and in Metric Tons (MT) per the definitions herein. This document has to be signed in original by the shipâ??s Master and made out in accordance without the instruction hereinafter specified in the Agreement
* Product: Copper Scrap * TYPE: WIRE Covered With Rubbers * Purity: 99.99% * Price: USD 4,600 per Ton * Origin: Ghana � West Africa * Quantity: 1000 Tons (subjected to 100 Tons Trial shipment) * LOADING PORT: Tema Port Harbor. * Packaging: Loose / Big bag of 500KG put in Container * Specification: As per export standard request Copper: 99, 9% Carbon: 0.03% Coblet:
Basmati rice We can supply rice by the container load. Polished processed and packaged to your specification. Along with certification. Price will depend on quantity and quality required. Standard 20 ft container, containing 25 metric tonnes
Our A grade maize starch meets the highest standards and is a versatile product that can be applied across a variety of industries such as: Textiles (sizing, finishing, printing) Paper and cardboard Glues and Adhesives Rubber and foam Paint fillers and putty Cosmetics Detergents Aluminium and Cast-Iron Foundries Fireworks Dry battery cell This multifunctional product can be modified to your needs and our sales team would be more than happy to help you find the starch that fits your industrial requirements. -Parameters : -Appearance-Free Flowing Cream-White Powder -pH of 10%- Slurry 4.5 - 7.0 -Moisture Content- Max 13.0% -Viscosity of 5% solution in Brookfield viscometer at 75C- Min 1400 Cps -Viscosity of 2% solution in RedWood No.1 viscometer at 75C -Min 34 sec -Fibre Content(100gram) -Max 1.0 ml -Sieve retention on 100 mesh -Max 1.0% -Ash Content- Max 0.2% -Sulphur Dioxide- Max 100 ppm -Brightness -Max 90.0% -Protein Content Max 0.45% -Free Acidity (10 gram)- Max 4.0 ml -Petroleum Extractable Matter- Max 0.25% -Acid Insoluble Ask- Max 0.05% -Alcoholic Acidity @90% Alcohol- Max 2.0 ml -Starch content- Min 98.0%
Plastic packaging bags.Manufacturer and supplier
Our products include various types of relevant industrial Resins used in paint, Adhesive, ink and wood industries, and to supply requirements of affiliated units inside and outside the country,
A J Services manufacture a large number of different styles of fire and smoke dampers. Both fire and smoke dampers play a vital role in the safety of a building which has ductwork system which is connected to a HVAC system. Fire dampers have an attached fusible link which is set to be triggered when a pre-determined air temperature is reached - this forces the blades to shut and allows the fire/smoke to travel no further. The links monitor the air temperature and are traditionally set to 72 degrees, although this can be altered if asked. The dampers are rated at 2hrs, this means that they will contain the fire in place for 2hrs. The dampers are manufactured from galvanised steel and can be produced in sizes ranging from 80mm to 2000mm with options for both circular and square/rectangular ducting. The casing on all dampers is rectangular, so the dampers which are suitable for spiral tubing have an attached spigot - this is where the damper can be attached to tubing and as such the blades are described as out of stream. The rectangular dampers can have an attached spigot, no spigot or can be an induct damper. All dampers as standard are supplied with hanging cleats, and have options for drywall framing and HEVAC frames.
