EQUINAS TFO 60i High Quality Inhibited Transformer Oil EQUINAS TFO 60i is a high-quality inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
EQUINAS TFO 60u High Quality Un-Inhibited Transformer Oil EQUINAS TFO 60u is a high-quality un-inhibited insulating oil with very good dielectric properties and oxidation stability intended for transformers, switchgears, and other electrical equipment. Transformer Oil is a series of products blended using highly refined mineral oil and a selected antioxidant. It is designed for insulating and cooling transformers, oil-immersed switchgear and other electrical insulating applications. Does not contain harmful polychlorinated biphenyls (PCBs). Applications: Used as an insulating oil in transformers, switchgear, inductors, condensers, transducers, and similar equipment, also at low temperature in outdoor use It insulates current-carrying parts from each other and from ground, carries away heat, prevents glow discharges, extinguishes electric arcs in switchgear, and impregnates insulating materials Features and Benefits: Excellent insulating properties High dielectric strength (1) Low power factor Resists oxidation and deposit formation Excellent low-temperature properties Compatible with materials used in transformers Does not contain any PCBs Meets or exceeds the IEC 60296 Packages size: Available in drums and flexibags Health and Safety: Based on available information, this product is not expected to produce adverse effects on health when used for applications referred to above and the recommendations provided in the Safety Data Sheet (SDS) are followed. The SDS is available upon request through our sales contact office. This product should not be used for purpose other than the applications referred to above. If disposing of used product, take care to protect the environment, follow the local rules and regulations of your local Authority.
It is an important filler in paints, detergents and soaps & semi-reinforcing filler in rubber. Filler in paint & rubber, Ceramic, agro, Detergents, Soaps, animal feed coating.
Adsorbent for edible and non-edible oil. Bleaching earth is used in the refining of vegetable oils and animal fats for human consumption. The absorbent capacity of the bleaching earth removes the impurities and unwanted matter, such as colouring substances (carotenoids), soaps, proteins and others, found in oils and fats.
Premium greases are formulated with both Lithium, calcium soap mixed type
Bentonite clay is used to detoxify and bleach palm oil (food grade). It can be applied in the first stages of the manufacturing of biodiesel from spent oil. Available as acid-treated, heated, and 5% carbon, direct Used for all kinds of edible oil/ vegetable, Oil decoloring and refining Available in 25kgs/1000kgs PP woven bag with PE inner Liner
As Per Client Requirement Of Vessel Design Requirement. We Can Carry Detailed Design And Fabrication As Per Requirement. With Heating, Cooling /heating Cooling Coils For Thermic Fluid /steam /electric, Agitators For Mixing, Safety Devices Like Pressure Relief Valves/measurement, Instrumentation For Measurement/ Structure Design., Etc. Also Can Be Supplied As A Complete Skid Kettles -non Pressursed Vessel Moc : Cs /cs Epoxy Lined / Ss / Alloy Steel.
High Pressure Boiler Oxygen Scavengers Boiler Scale & Corrosion Inhibitor Sludge Conditioners Alkalinity Builders Boiler Phosphate Treatment Chemicals Steam Condensate Line Treatment Chemicals Fuel Additives & Anti-Foams Cooling Water Scale & Corrosion Inhibitors Cooling Water Biocides & Biodispersants Reverse Osmosis & Nano-Filteration Membrane Scale and Fouling Cleaners Reverse Osmosis Antiscalants & Antifoulants Reverse Osmosis Bicides Reverse Osmosis Corrosion Inhibitors Closed System Corrosion Inhibitors Closed System Biocides Descaling Chemicals
Acrylic Acid Homo-Po|ymer Carboxylic Sulphonate Co Polymer Carboxylic-Sulphonate Ter Polymer Phosphino Carboxylic Acid Carboxylic Sulphonate Multi Polymer Carboxylic Sulphonated Non Ionic Ter Polymer
Biocide /Slimicide Scale Inhibitor Antiscalant
Sulfur Granular Grade 99.95 & lump as per attached specification Request to send your enquiries for price. Payment terms TT 30:70
Title: The Ultimate Guide to Adhesive Tapes: Types, Applications, and Choosing the Right Tape for Your Needs Meta Description: Discover everything you need to know about adhesive tapes, including their various types, applications, and expert tips for choosing the perfect tape for your specific needs. Introduction: Adhesive tapes are versatile and indispensable tools used across a wide range of industries and applications. From packaging and construction to automotive and electronics, adhesive tapes offer reliable bonding, fastening, and sealing solutions. In this comprehensive guide, we will delve into the world of adhesive tapes, exploring their different types, highlighting popular applications, and providing valuable insights to help you select the right tape for your unique requirements. Table of Contents: 1. Types of Adhesive Tapes 1.1. Single-Sided Tapes 1.2. Double-Sided Tapes 1.3. Masking Tapes 1.4. Duct Tapes 1.5. Electrical Tapes 1.6. Foam Tapes 1.7. Specialty Tapes 2. Applications of Adhesive Tapes 2.1. Packaging and Shipping 2.2. Construction and Building 2.3. Automotive and Aerospace 2.4. Electronics and Electrical 2.5. Medical and Healthcare 2.6. Arts and Crafts 3. Factors to Consider When Choosing Adhesive Tapes 3.1. Bonding Surface 3.2. Temperature Resistance 3.3. Strength and Durability 3.4. Environmental Conditions 3.5. Removability and Residue 3.6. Budget Considerations 4. Expert Tips for Selecting the Right Adhesive Tape 4.1. Understand the Application Requirements 4.2. Evaluate Surface Compatibility 4.3. Consider Environmental Factors 4.4. Test Before Full Implementation 4.5. Seek Expert Advice if Needed 5. Proper Usage and Storage of Adhesive Tapes 5.1. Surface Preparation 5.2. Application Techniques 5.3. Storage Guidelines Conclusion: Adhesive tapes play a crucial role in various industries, offering practical solutions for bonding, sealing, and fastening needs. By understanding the different types of adhesive tapes, their applications, and the key factors to consider when selecting the right tape, you can make informed decisions that result in successful outcomes. Remember to follow proper usage and storage guidelines to maximize the performance and longevity of your adhesive tapes.
We are manufacturers and exporters of safety shoes from India, all our safety shoes are made of 100% genuine leather with good quality PU molded sole and we manufacture safety shoes according to international standards. We have lot of models available such as Low ankle safety shoes, High ankle safety shoes, executive safety shoes, security safety shoes etc. FOR BUSINESS ENQUIRES CONTACT: TAWOOS AL ALAMIAH GENERAL TRADING LLC P.O.BOX – 41212, DUBAI. UAE T: 00971 4 22 73918 |M: 00971 553245105 / 00971 527845977 E: hidayath@tawoosind.com | W.tawoosind.com
Product Description Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing. Technical Specifications Machine Type: TMI 60.5.1.200412a Production: 800 Kg/h Width: 1060 mm Beater type: Hedgehog Beater diameter mm: 610 Beater rotating speed r/mm: 480 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412b Production: 600 Kg/h Width: 1060 mm Beater type: Card wire roller Beater diameter mm: 600 Beater rotating speed r/mm: 540 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser) Machine weight: 1800 Machine Type: TMI 60.5.1.200412c Production: 600 Kg/h Width: 1060 mm Beater type: Sawblade Beater diameter mm: 600 Beater rotating speed r/mm: 600 Hopper roller diameter mm: 76 Hopper roller rotating speed r/mm: 35-39.45 Grate Bar Type: Triangle grid bar Adjusting type: Hand wheel out of machine General Power kw: 3.55 Size(LxWxH): 1810x1650x3875(including Condenser) Machine weight: 1800
Product Description Mixing opener is suitable for all classes of raw cotton (usually for those with high maturity and higher class). These are placed in the front of the automatic plucker, and transmitted them to a small block brought by the automatic plucker raw cotton into the machine with the aid of Condenser add on (additional item), open and remove some impurities and dusts, then suck the raw cotton into the platform with its condenser. Technical Specifications Production Kg/h: 800 Kg/h Width in mm: 1060 Trash extraction efficiency: Trash extraction 3.5/hour, usually about 30-35% Spiked apron speed: 1, 1.25, 1.5, 1.75 m/min Bales speed: 60x 70x 80 100 m/min Press apron speed: 1x 1.25x 1.5x1.75 m/min Evening roller diameter/rotating speed: 260mm\200r/min Spike beater diameter/rotating speed: 400mm\400r/min Knife beater diameter/rotating speed: 400mm\430r/min Small hedgehog beater (1) diameter/rotating speed: 400mm\700;800;900r/min Small hedgehog beater (2) diameter/rotating speed: 400mm\745;850;960r/min Grid bars type/interval space: Flat steel grid bar spike knife double beater 12-22Small hedgehog beater (1) First group 12-22mm Second group 10-22mm Small hedgehog beater (2) 10-22mm Spike, knife beater and grid bar: Entrance10-15mm Exit12-20mm Hedgehog beater (1) and grid bar interval space: Entrance10-14mm Exit13-17mm Hedgehog beater (2) and grid bar interval space: Entrance10-15mm Exit15-20mm Press apron and spiked apron interval space: 60-80mm Spiked apron and evening roller interval space: 40-80mm Spiked apron and spike beater interval space: 5mm Motor specification: Rotating beater 6-4kw (left) 1430r/min Rotating spiked apron 2-21-6 0.6kw 930r/min Rotating Spiked apron 0-100 0.37kw 14r/min Size (LxWxH) mm: 5358x1430x3696 including Condenser Machine weight: 4200 Kg
Product Description Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. It's the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double. For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality. Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct. Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process. â?? Technical Specifications Production (kg/h): 800 - 1000 kg Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets) Outer Wall Diameter in mm: 4760 mm Inner Wall Diameter in mm: 1300 mm Speed of Carriage in r/min: 1.6 - 2.2 r/min Beater Rotating Speed in r/min: 740 r/min Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm Crab Slewing Speed in r/min: 0.59 - 2.96 r/min Ground Rail External Diameter in mm: 5192 mm Total Height in mm: 4155 mm General Power in Kw: 4.17 Kw Net weight in Kg: Around 1600 Kg â??
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to /
Product Description Waste Recycling Machine adopts a leading technology. It superfine new tearing machine for textile waste which are with porcupine roller with diameter 600 -1000 mm each cylinder with difference angle and specifications taper-pins. The feeding rail adopts elastic rubberised roller with diameter 150 - 250 mm. The working width from 1000-2000 mm and the maximum capacity up to 2500kg per hour. Technical Specifications Machine TMI 60.17.1.2000416a Processing Capacity (kg/h): 160~180 Drum Diameter (mm): 250 Drum Weight (Kg/Drum): 420 Working Width (mm): 1000 Installed Power (Kg/h): 5.5*N Outside Dimension (LxWxH) (mm): 10200x1800x1400 Machine TMI 60.17.1.2000416b Processing Capacity (kg/h): 220 ~ 280 Drum Diameter (mm): 400 Drum Weight (Kg/Drum): 640 Working Width (mm): 1000 Installed Power (Kg/h): 7.5*N Outside Dimension (LxWxH) (mm): 11600x1800x1400 Machine TMI 60.17.1.2000416c Processing Capacity (kg/h): 300 - 350 Drum Diameter (mm): 600 Drum Weight (Kg/Drum): 600 Working Width (mm): 1000 Installed Power (Kg/h): 22+15*(N-1) Outside Dimension (LxWxH) (mm): 14400x1800x1450 Machine TMI 60.17.1.2000416d Processing Capacity (kg/h): 450 - 550 Drum Diameter (mm): 600 Drum Weight (Kg/Drum): 600 Working Width (mm): 1500 Installed Power (Kg/h): 30+18.5*(N-1) Outside Dimension (LxWxH) (mm): 14400x2300x1450
Product Description Automatic Cone winder inherits the advantages of a series winder, adopts brand-new profile design & is featured by beautiful and dignified features. It adopts the brand-new smart anti-pattering device, new type of tension control system and new type of balloon central mechanism to ensure perfect package building, more even winding tension, high machine operation stability and reliability to meet customer requirement. Technical Specifications Machine Type: Single Spindle, Single Sided, LH Machine or RH Machine Application: Single of Cotton, Wool, Man-made staple fiber or their blends, yarn counts from Nm 3.5 to the highest Winding Speed: 400 - 2200 m/min, Step less adjustable No. of Spindles: 12 - 54 Spindles, every 4 spindles one extension Spindle Pitch: 320 mm Package Taper: 3'30", 4'20", 5'57", 9'15" Feeding Packages:
Product Description industrial dehydrator machine,extractor machine,dewatering machine,use 304 stainless steel,Dewatering machine is a washing equipment, generally used to remove water during the washing items of clothing, textile articles, and other crops after. After dehydration reuse dryer to dry, you can achieve the effect of completely drying. It has the following advantages: > Roller is made from good quality stainless steel, it is with strong acid resistance and alkali resistance, durable; > With fast dehydration speed, high dehydration efficiency and without any damage to cloths; > It is with compact structure, small space needed, and with reliable performance. Suitable for factory ,hospital,laundry service, etc. Works The main components of the dryer is stainless steel, cloth liner around the hole to be dehydrated in the laundry is placed in a stainless steel liner. High Speed rotary motor driven by a belt stainless steel liner. So have a great centrifugal force and therefore left out of water through the hole on the liner, unified discharged after being collected. Features industrial dewatering machine For wet clothes dryer work for two minutes achieved the same effect as the first 20 minutes the drying achieved similar results with the dryer work, but not completely dry the laundry dryer, so saving time and energy than the approach is first to wet clothes before dewatering operations, finished off the water and then drying operations. Technical Details Model: 45.7.7.200418a Rated Capacity: 20 Water extraction capacity: 900 Drum Volume: 62 Motor Power: 1.1 External Dimension: H: 680 W: 900 Machine Weight: 238 Model: 45.7.7.200418b Rated Capacity: 30 Water extraction capacity: 820 Drum Volume: 97 Motor Power: 1.5 External Dimension: H: 700 W: 1000 Machine Weight: 266 Model: 45.7.7.200418c Rated Capacity: 35 Water extraction capacity: 820 Drum Volume: 126 Motor Power: 3 External Dimension: H: 750 W: 1100 Machine Weight: 342 Model: 45.7.7.200418d Rated Capacity: 50 Water extraction capacity: 820 Drum Volume: 180 Motor Power: 4 External Dimension: H: 820 W: 1250 Machine Weight: 521 Model: 45.7.7.200418e Rated Capacity: 70 Water extraction capacity: 800 Drum Volume: 263 Motor Power: 5.5 External Dimension: H: 880 W: 1500 Machine Weight: 728 Model: 45.7.7.200418f Rated Capacity: 100 Water extraction capacity: 800 Drum Volume: 298 Motor Power: 5.5 External Dimension: H: 900 W: 1600 Machine Weight: 878 Model: 45.7.7.200418g Rated Capacity: 120 Water extraction capacity: 800 Drum Volume: 429 Motor Power: 7.5 External Dimension: H: 1000 W: 1750 Machine Weight: 1050
