End use of Bottle grade chips mainly depends on the Intrinsic Viscosity (IV). PET Chips with IV 0.80 is mainly used for drinking water bottles and mineral water bottles. PET Chips with IV 0.82 is mainly used in making bottles for carbonated beverages, small bottle for edible oil, alcohol, medicines and pet sheets as they need better quality and high finished product rate. PET Chips with IV of 0.85 are mainly used for making huge packing bottles for carbonated beverages and 3-5 gallons water bottles as these bottles should to have great strength and resistance against high pressure. Bottle Grade PET Chips
Features of bottle grade PET Chips are low processing temperature, wide scope in packaging, excellent transparency and high in finished product rate.
Product Introduction
PET spunbond substrate fabric compared with short fiber polyester tire has high tensile strength, elongation, stability, aging resistance, long service life, good wettability and other characteristics, as the internationally recognized high-performance SBS, APP and other modified asphalt waterproof roll tire.
Application Area
Modified asphalt waterproof coil is widely used in waterproof concrete building, such as building roof, underground structure, high-speed railway, tunnel, highway and railway bridge waterproof field.
PET FLAKES
The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion.
SPECIFICATION:
GRADE AA
PVC CONTENT: 0.005% (50ppm)
OTHER IMPURITY: 0.01% (100ppm)
GLUE RESIDUE/GLUE: 0.02% (200ppm)
GRADE A:
PVC CONTENT:0.01% (100ppm)
OTHER IMPURITY: 0.02% (200ppm)
GLUE RESIDUE/GLUE:0.02% (200ppm)
COLOR: CLEAR / NATURAL
PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
The main raw material of PTA and MEG is added with modifiers of third monomer and fourth monomer, etc., then subjected to copolymerization reaction to make modified polyester pellet with melting point at 100'C - 225C.
Functional characteristics low melting point, good spinnability and excellent fiber adhesion effect
Application scope manufacturing bi-component core-sheath fiber and filament yarns, etc.
Specification - LOW MELTING PET CHIPS TRB FIBER GRADE 110-225.
15525 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
Advantages: It is uniformly depressed anti-adhesive, with excellent film-forming properties; Polymerization of continuous device production makes the quality high and stable.
Application: It can be used in films with special requirements for optical and surface properties or ultra- films below 81/4m (micrometer ). It can be used directly in the food packing materials after FDA approval.
For the production of thin film and solar cell encapsulation substrates with high strength requirement
The solar polyester film can protect the solar panel.
PET FLAKES
The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion.
SPECIFICATION:
GRADE AA (B to B flakes)
PVC CONTENT: less 0.005% (50ppm)
OTHER IMPURITY: less 0.01% (100ppm)
GLUE RESIDUE/GLUE: less 0.02% (200ppm)
GRADE A: (Sheet or Filament Grade)
PVC CONTENT: less 0.01% (100ppm)
OTHER IMPURITY: less 0.02% (200ppm)
GLUE RESIDUE/GLUE: less 0.02% (200ppm)
COLOR: CLEAR / NATURAL
PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle
What is PET Open Agent Film Chips?
PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film.
It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable.
As an opening agent to be used with film grade base materials to produce various types of films.
It can be used in films with special requirement for optical and surface properties or ultra-films below 8u.
Can be used directly in foodstuffs after FDA approval.
What is PET Open Agent Film Chips?
PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film.
It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable.
As an opening agent to be used with film grade base materials to produce various types of films.
It can be used in films with special requirement for optical and surface properties or ultra-films below 8u.
Can be used directly in foodstuffs after FDA approval.
This type Chips that is designed to resist burning and melting at low temperatures.
Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch
Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating
Description:
Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220.
The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180.
Application:
Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products.
LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane.
Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue.
Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
What is pe/pp bicomponent fiber?
PE/PP bicomponent fiber is a type of synthetic fiber that is made up of two different polymers, polyethylene (PE) and polypropylene (PP), which are combined in a single filament.
What are the advantages of using PE/PP bicomponent fiber in textiles?
PE/PP bicomponent fiber offers several advantages in textiles, including improved strength, durability, and moisture management. It also provides a softer feel and can be used in a variety of applications, such as sportswear, outdoor apparel, and home textiles.
What are some common uses of PE/PP bicomponent fiber in the textile industry?
PE/PP bicomponent fibers have several advantages that make them popular in the textile industry. Some of these advantages include:
Improved Strength: PE/PP bicomponent fibers have a higher tensile strength than regular fibers, making them ideal for use in high-stress applications.
Enhanced Durability: These fibers are resistant to wear and tear, making them ideal for use in products that need to withstand daily use.
Improved Comfort: PE/PP bicomponent fibers have a soft texture, which makes them comfortable to wear against the skin.
Moisture Management: These fibers are hydrophobic, which means they repel water and moisture. This property makes them ideal for use in products that need to stay dry.
Some common uses of PE/PP bicomponent fiber in the textile industry include:
Clothing: These fibers are often used in the production of sportswear, outdoor clothing, and other products that require enhanced durability and moisture management.
Home Textiles: PE/PP bicomponent fibers are used in the production of carpets, curtains, and other home textiles that require enhanced strength and durability.
Nonwoven Fabrics: These fibers are used in the production of nonwoven fabrics, which are used in a wide range of applications, including medical products, hygiene products, and filtration materials.
Overall, PE/PP bicomponent fibers offer several advantages that make them a popular choice in the textile industry for a wide range of applications.
Industrial care, Paint & Coating, food processing, Pharma, Chemical, Environmental, water treatment, lubricants. Perlite base Filter Aid is a natural aid to industrial filtration for making the filtration system fast and more economical. Perlite Filter Aid have gained acceptance in almost every industry concerned with the separation of liquid and solids and even gasses and solids. It is used in filtration like starch, juice, resins, beers, wines, sweeteners, vegetable Oil, wastewater treatments, edible Oil, enzymes, antibiotics and epsom salt. It is used in storm water filtration, ecology embankments, media filter drains, water treatment, sizingâ??s, Oil & solvent recovery, greases, dyes, resins, and paints
Glutaraldehyde is an exceptional disinfectant which is a transparent, colorless, water-soluble and oily liquid.
AREAS OF APPLICATIONS
Water treatment industry
Oil industry
Textile industry
Leather industry
Paper making
Plastic industry
Biochemistry applications
Adhesives
Preservatives
Fuels
Perfumes
Medical care
PRODUCT FEATURES
Eco-friendly
High performance
Highly effective
Reduced toxicity
Easy to use
Fast acting
Long shelf-life
Cost competitive
