LUBENZ HOXX PLUS HYDRAULIC OIL HVI ZF range of lubricants are high viscosity index Zinc Free Ashless anti-wear hydraulic
fluids formulated with high quality HVI base stocks and advanced very low ash anti-wear additive technology. They are designed
to work efficiently in hydraulic & fluid power transmission systems, subjected to wide temperature ranges operating under
severe conditions. These oils are available in ISO viscosity grades from 15 to 150. Moreover, they are also designed to work in
systems where high hydrolytic stability is required, even in presence of high moisture content in hydraulic systems.
LUBENZ IND COMPRESSOR OIL of lubricants are supreme performance air compressor oils formulated with
high quality base stocks and advanced additive technology, to provide exceptional equipment protection and
reliability for compressors operating under mild to severe conditions. They are designed to meet or exceed the
requirements of DIN 51506 VD-L standards and demonstrate high resistance to oxidation and deposit
formation.
LUBENZ INDS REFRIGERATION OIL are high performance lubricants formulated from extremely low wax naphthenic oil primarily intended for use in refrigeration compressors where an uninhibited oil is required. It is recommended for use in
refrigeration compressors using ammonia, CFC (chlorofluorocarbon) and HCFC (hydrochloro-fluorocarbon) refrigerants
where the evaporator temperature ranges down to approximately -35F or -37C. It is compatible with most refrigerants except sulphur dioxide & are not recommended for use with HFC (hydroflurocarbon) refrigerants.
LUBENZ LUBETHERM HEAT TRANSFER OIL are high performance HTOs formulated from highly refined base stocks that are resistant to thermal cracking and chemical oxidation & are intended for use in closed indirect heating
installations. The flash points of these oils will not decrease significantly in service because of their resistance to thermal
cracking at the operating temperatures for which they are recommended.
LUBENZ PILLAR TURBINE OIL series are supreme performance circulating oils formulated with high quality base stocks and advanced additive technology, to provide exceptional equipment protection and reliability in applications lubricated by circulating systems which are operating under low to medium severity conditions. They are designed to meet or exceed the general requirements of most builders of turbines, vacuum pumps, compressors & bearings and demonstrate high resistance to oxidation and sludge & varnish formation.
for more information, please contact us.
15524 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
LUBENZ ROXX SPECIAL GEARLUBE of lubricants are supreme performance industrial gear oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in all types of enclosed gear drives with circulation or splash lubrication systems, where outstanding extreme pressure characteristics (EP/AW properties), extremely high load carrying capability and excellent demulsifying properties are desired. Moreover they offer extremely high protection against micropitting, wear and corrosion in enclosed gears and all types of oil lubricated bearings. Suitable for use in large & small spur bevel, spiral, helical & herringbone gears.
LUBENZ SP FLUSHING OIL is a solvent free, fast acting, engine cleaning formulation that removes engine
depos- its, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection
and its fast acting formulation works in 10 minutes. The solvent free formulation protects gaskets and seals from damage during the cleaning process.
LUBENZ SP SEWING MACHINE OIL range of lubricants are premium quality oils specifically formulated for the
lubrication of high-speed machine elements in industrial sewing machines. These oils are formulated from very high
quality hydro-treated, low viscosity base oils and optimum additive technology system to provide improved thermal,
oxidation and color stability. They are available in three viscosity grades,LUBENZ SP SEWING MACHINE OIL 10 (ISO VG
10), SM 15 (ISO VG 15) and SM 22 (ISO VG 22).
LUBENZ MONOX MARINE MULTI SYSTEM series is a range of high performance marine multipurpose system oils formulated with high quality paraffinic base stocks and balanced additive system to ensure optimum performance and excellent protection in low speed, high output cross head marine engines, operating on residual fuels. It has sufficient alkalinity to neutralize any strong acidic combustion products which may enter into the crankcase and it demonstrates high load carrying ability under severe operating conditions.
LUBENZ ONYX TRUNCK PISTON EO series is a range of high performance 30 TBN marine diesel engine oils formulated with premium quality base stocks and high performance additive detergent technology to ensure optimum performance and protection for trunk piston engines. They are designed to operate efficiently in severe residual-fuelled medium-speed diesel applications found in marine and stationary power industries. These TPEOs provide outstanding residual fuel compatibility and excellent engine cleanliness, especially in crankcase, camshaft areas, ring belt and piston under crowns operating under severe conditions.
LUBENZ VISTA AUTOMATIC TRANSMISSION FLUID A TYPE A (ATF DEXIII-CVT) is a high performance automatic transmission
oil, formulated with high quality base stocks, shear stable viscosity index improvers and advanced additive
system to meet or exceed the requirements of General Motors for Type A specification. Suitable for
passenger cars and commercial automatic transmissions, for use in applications like power steering
systems, hydraulics and some manual transmissions where automatic transmission fluid is specified.
LUBENZ GEAR OIL ROXX GL-4 of lubricants are high performance heavy duty gear oils, formulated from high quality base oils and
an advanced additive system. These lubricants are designed for automotive heavy- duty transmissions, axles and final drives.
Moreover these oils are engineered to work efficiently in transmissions where protection against wear and scoring is required
and high level of oil film protection is desired.
LUBENZ GOLDEN TORQUE CONVERTOR HF-32 is a high performance dual clutch transmission fluid, formulated with
high quality fully synthetic base stocks and advanced additive technology with consistent shear stability for
maintaining optimum film thickness for reliable protection of gears and bearings, also providing an outstanding
improvement in friction durability enabling longer drain intervals under a broad range of driving conditions,
temperatures and transmissions. It is designed specifically to be used as a service-fill DCT transmission fluid for
European, Asian and American vehicles equipped with wet & dry dual clutch transmissions. Outstanding torque
retention to provide smooth shift feel without NVH (Noise, Vibration and Harshness) concerns and all-around
lubrication protection of the transmission components to help extend transmission service life with a smooth driving
experience. It provides exceptional copper corrosion protection for better hardware durability, excellent oxidation
control to provide longer fluid life and good seal compatibility for better leakage prevention.
LUBENZ SOLO TRANSFORMER OIL BS and GB are severely refined hydro-cracked / hydro-treated virgin inhibited
insulating oils with highest degree of purity and stability. It is manufactured from judiciously selected blend
of latest technology feed stocks, which is highly suitable for all grades of Power & distribution Transformers,
Circuit Breakers, Oil filled switches and X-ray equipment.
LUBENZ IND SPINDLE OILare formulated from select high-quality, low viscosity base oils and additives that impart good
resistance to oxidation and protection from rust and corrosion. They possess very good resistance to foaming and
separate readily from water. Specifically designed for the lubrication of high-speed spindles in machine tools. They are
also used in some critical hydraulic, circulation systems and airline oilers where the appropriate viscosity grade is
selected.
LUBENZ PETRO Rock Drill oil series of lubricants are supreme performance Pneumatic Rock Drill & Tool oils, formulated with high quality base stocks fortified with sulfur-phosphorus additive system. They are designed to work efficiently in pneumatically operated rock drills in underground and surface mining operations. They offer optimum adhesiveness and emulsification with water to avoid adverse effects of rust and corrosion. Their excellent wear protection property helps in reducing component wear and maintains adequate lubrication film to carry high loads.
LUBENZ SP CUTTING OIL is high quality water soluble cutting oil specifically formulated for cutting and
grinding operations of metalworking for both ferrous and non-ferrous components. These oils are formulated
to provide outstanding emulsion stability & rust inhibition and woks satisfactorily for all types of processes
involving fine carbon steels.
LUBENZ SUPER NANO HIGH TEMP CALCIUM SULPHONATE COMPLEX GREASE, made of the NEW
GENERATION calcium sulfonate complex soap designed by LUBENZ. This new soap has enhanced
properties in terms of water resistance, load capacity, thermal resistance, anticorrosion properties while
keeping a very high level of pumpability and ability to lubricate well in case of high speeds.
LUBENZ PIONER GREASE CALCIUM BASE-EP series are high performance greases, formulated with Calcium based thickeners and an ISO VG 320 mineral base stock to provide added protection against wear, rusting and water washout. They are available in NLGI grades 2 & 3, which are suitable for general purpose automotive applications at moderate temperatures and loads. The suitable operating temperature range is from -20�°C to 80�°C maximum. It does not contain lead or any other heavy metals which are considered harmful to human health and environment.
LUBENZ ULTIMATE HIGH TEMPERATURE CLAY BASED GREASE are high temperature greases, formulated with
bentonite clay based thickener and extreme pressure additive system to provide extra protection against wear,
rusting and water washout especially in industrial equipment operating under heavy loads and high
temperatures. They are available in NLGI grades ranging from 00 to 3 with base oil viscosity of ISO VG 150 &
320. It retains its consistency at high temperatures and provides good storage stability.
for more information, please contact us.
15524 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.
