Product Description Multi Mixer is the mixing process of blow room. It is suitable for mixing cotton especially for synthetic fibers whose mixing evenness is highly demanded. As this Multi Mixer is equipped with a beater at the outlet, the mixed fiber can be further opened before feeding to next machine. Technical Specifications Capacity: 800 Kg/h Number of trunks: 4-6 Air volume of conveying fan: 1.1 m3/s Power: 10.85 Kw Dimensions: 250 mm x 1600 mm x 4400 mm Net weight: 4800 Kg
Product Description Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process. Technical Specifications Beater Width: 1720 mm (Special) & 2300 mm (Normal) Production Kg/h: 1000 Kg/h & 1500 Kg/h Basic Pile Weight: 6000 Kg & 7500 kg Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time Calender Roller Dia.130 mm Both Sides; Middle 116 mm Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min Installed Power: 8.6 Kw & 10.6 Kw Overall size: 22030*5212*3082 & 22030*6648*3082 Net weight: 6000 Kg & 6500 Kg
Product Description Unique patented three-roller stripping cotton; Increase in the gill plate carding roller; After the first three additional two fixed cover; Brake fast-Astoria; Used Step-pressure roll; Use of Adolf timing belt drive; About closed-end security cover; Quality of the MCC. Technical Specifications Scope of application: Apply to the local cotton and chemical fiber spinning pure or blended with roll feeding. Quantitative production: 3.5 ~ 6.5 g / m Production: 35 kg / h Working width: 1000 mm Additional pieces of comb: Roller carding a board Cover fixed after 2 Cover fixed before the Drawing a multiple of total: 67 ~ 120 Spurs roll diameter of the work: �¦250 mm Barbed roller speed of the work: Cotton: 1070 to / Fiber: 980 / Work of the cylinder diameter: �¦1289 mm Cylinder speed of the work: Cotton: 360 / Fiber: 330 / Work of Adolf diameter: 706 mm Speed of the work of Adolf: 21.3 ~ 38.2 to
TMI 45.49.1.200430 - SPRING TYRE EARTHQUAKE ACCESSORY MACHINE Product Details Use: Food, industrial cleaning fluid recovery from water, oil removing machine. Short introduction: TMI 45.49.1.200430a spring tyre earthquake Standard type 20kg load Weight about 170kg TMI 45.49.1.200430a spring tyre earthquake High barrel 20kg load Weight about 180kg
TMI 45.51.3.200430 - SPRING TYRE EARTHQUAKE ACCESSORY MACHINE Product Details Use: Industrial washing, hotel cleaning special fast clothes dewatering machine Short introduction: TMI 45.51.3.200430a spring tyre earthquake Standard type 20kg load Weight about 170kg TMI 45.51.3.200430b spring tyre earthquake High barrel 20kg load Weight about 180kg TMI 45.51.3.200430c spring tyre earthquake Heavy load 40kg load Weight about 210kg Outer diameter 600mm Barrel diameter 530mm
TMI 45.52.4.200430 - Safety Cover With Bearings Accessory Machine Product Details Use: Industrial washing, hotel cleaning special fast clothes dewatering mac Short introduction: TMI 52.4.200430a Four bearing stainless steel safety cover 90GB copper motor TMI 52.4.200430b Four bearing plastic safety cap 90GB copper motor TMI 52.4.200430c Two-bearing stainless steel safety cover 90GB copper motor TMI 52.4.200430d Two-bearing plastic safety cap 90GB copper motor
Product Description Chest Flat Work Ironer is another newly developed chest ironer being added into our product line recently. It has fixed roller and elevating chest. Rollers are fitted with imported spiral spring cushion support and felt padding is being tightly wrapped round the entire roller surface. The patented elevating mechanism of the chest unit allows even ironing pressure to be applied throughout the whole usable ironing surface and width of the chest, resulting in good flat ironing work. Only imported high-quality VFD controller is being chosen and incorporated into the control system. It allows reliable continuous smooth ironing speed adjustment. Utilises differential front and rear roller speed principle to give a "straightening pull effect" to the fabric during ironing so that good flat work results can be obtained. Well-polished chest surface finishing with large heating area to allow fast heat-up. Fully enclosed humidity control system improves working environment and physical look of the flat work ironer. Adjustable ironing pressure to suit different type of flat work items. High quality steam trap system which enhances heating efficiency resulting in higher output with lower operating cost. Different ironer capacities are available for selection. VIZ: Roller diameter ranging from 1000-800 and 500mm. Ironing width ranges from 2500mm to 3300mm. number of roller range from 1 to 2.
TMI 45.33.4.200425 - Flatwork Ironer (gas Heating Type) Product Description It is with speed adjusting motor and LS speed controller which with a large controlling range; It is driven by gears, reducing the twitter and noise generated by the sprocket; Conveyor belt is of exclusive brand which is with high temperature resistance and anti-static; It is with reasonable design .clothes become hard and flat after ironing.
TMI 45.35.2.200426 - Mushroom Shape Laundry Press Product Description This mushroom shape Laundry Press is ideal for finishing tapered areas,yokes,small areas of dresses,short sleeves,and other hard-to-reach parts. Two separate cylinders:one is to close the top portion,and another is to apply pressure.This keeps the efficiency of each cylinder at maximum for the longest possible time.Adopting the hydraulic buffer makes to close or open the die head smooth and reduce noise and vibration.The integral design of the gas circuit is very simple and easy. Pressing part is especially big and made of iron fiber and durable cotton cover as well as with colour coded push-button switch.Its features are beautifully designed, strong, high stability and providing ease of operation and maximum operator convenience.
TMI 45.36.3.200426 - Collar Sleeve Pressing Machine Product Description Collar Sleeve Pressing Machine An easy operating machine. After washing and dehydrating water,the clothes can be ironed directly. This machine is produced with a high-quality pneumatic element and reasonable pneumatic air route design. When operating,it is controlled by full compressed air ,no need external power supply. It always works stably, reliably and safely. To ensure the ironing quality,the work panel is made of 6mm polished stainless steel,the steam room is with an special and excellent structure.The design of steam circuit is very simple and efficient. That makes a fast rise of temperature and low heating consumption. In addition, this collar-sleeve pressing machine can be customized according to your requirement.
Product Details Performance and features: Newly developed automatic folder; an essential option for flat work ironer where automatic folding application is necessary. Precision folding capability, auto sheet width sensing and Meidi's advanced intelligent control system makes the equipment simple to operate and yet flexible in application. Equipment with user friendly MHI and operating program software. Reliable micro-processor-based control system with touch screen display panel. Two sets of independent motor drive systems each with VFD controller, folding speed of 50m/min. Total of five folds with two primary folds and three cross folds, Maximum width of 3000 x 3000mm. Self diagnostic fault alarm systems with display, safety operation control features, easy troubleshooting and daily maintenance. Anti-static control feature improves operational efficiency and stability.
Winding Machines
New Accessory Machines
Gum arabic, sesame, watermelon seeds, sorghum, chick peas, pigion peas, hulled sesame, gum alibanum, grain and edible oil, machines, wheat flour.
Instrumentation, controls, HVAC, pumps.
Heavy machinery.
Heavy machinery.Transportation and shipping
Cut-lo-lenght machine, corrugated m/c, sliiting line machine, 7 profile machine.
Machines.
Used Japanese & Korean engines & used auto spare parts.
