The BS drum separator is designed for cleaning bulk materials from impurities and separating them into fractions. It is ideal for cleaning and sorting of wheat, barley, oats, millet, sunflower, maize and other grains. On the rotating drum is installed on the frame. On the loading side, the drum can be height by means of a screw and the speed of rotation can be adjusted accordingly. adjusted accordingly. Models are available in various capacities and specifications (from 30 to 200 t/h). 1 year warranty Principle of operation 1. Pre-cleaning 2. Main cleaning. 3. Sieve separation 4. Sorting 5. Calibration
The BISS is a modern sieve separator designed for cleaning cereals, pulses, oilseeds, perennial and annual grasses and other crops, separating the waste into several fractions. The cleaning is done by sieving the grain through a sieve of a specific shape and size. The BISS is designed as a universal separator and can operate in pre-cleaning and final cleaning modes. Models are available in various capacities and specifications (from 13 to 80 t/h). Principle of operation Cleaning is done by passing the grain through a sieve of a specific shape and size. For cleaning, sieves with round, oblong or triangular holes can be used, which correspond to the shape and size of the main grain.The sorter operates in two modes depending on the sieve used: pre-cleaning and final cleaning.The sieves are self-cleaning with special rubber balls. 1 year warranty
WE PRODUCE: 1. rubber shredder 2. metal shredder 3. wood chipper 4. shredder of building materials 5. different modifications are possible 6. Custom production is possible
Productivity in primary grain cleaning, within 5 tons per hour Productivity in seed material calibration, within 2.5 tons per hour Power consumption0,2 - 0,55 W, 220/380v, 50Hz Length 2070 mm Width 600 mm Height 1890 mm Weight 130 kg
GreenPower company produces and sells filter elements of various capacities multicyclone or battery cyclone. It belongs to a group of mechanical cleaners with dry cleaning method of high efficiency. Cleaning efficiency from particles sized 5-10 μm is 90%, while from particles that are larger is 99%. Production of cyclone elements from basal castings of modular construction improves their efficiency, durability and simplified assembly. Possible places of multicyclone (battery cyclones) using: ferrous and non-ferrous metallurgy enterprises, granaries and processing plants, bread-baking complex, oil-extraction plants, starch plants, energy industry, cement plants, chemical industry, coal industry, gas pipelines.
GreenPower company specializes in the design and manufacture of complexes, allowing to neutralize - to utilize MSW (municipal solid waste), industrial waste, medical waste, port waste, quarantine and other hazardous waste in the place of their formation, thus eliminating the need for daily removal to the utilization site. Our complexes are designed for complete and absolutely safe neutralization of medical waste and other hazardous waste. The waste processing (waste utilization) or waste destruction is provided by method of THERMOCATALYTIC NEUTRALIZATION OF WASTE - environmentally friendly process. This development combines two key technologies, which are recognized by the world environmental community and the project "Europe, free from toxicants-2" as promising and close to industrial use. Complexes can be developed with capacity of 100 kg/hour, 300kg/hour, 500 kg/hour and 1000 kg/hour. If you have any questions, please donâ??t hesitate to contact us by phone +380577174464 or send us email to info[at]piroliz.org
Proper cooling of chocolate products gives glossy surface, taste and long shelf life. Our model range consists of variety of cooling tunnels with standard belt width 420, 620, 820, 1050, 1300 and 1500 mm. The length of the tunnel is performed refrigeration based on customer requirements. Excellent quality of product cooling provided high accuracy of the temperature in the tunnel and the presence of three temperature cooling zones. The presence of different modes of cooling products such as convection, static and combined gives you the opportunity to work with any product, and modular design - high flexibility of the cooling tunnel and, if necessary, change the length in the future. Application of modern refrigeration units from European manufacturers allows to obtain high efficiency and economy. Ability to execution as a standard installation with the use of refrigeration compressor and the evaporator inside the tunnel, and execution from an external source of cold water. The customer can choose the most convenient for him execution and location of units to obtain the most optimal and cost-effective operation of cooling tunnel. In a special execution cooling tunnels can be of any width and conveyor equipped with a conveyor belt or conveyor wiremeshtransporter, modular belt, chains and others.
ENROBING MACHINES of BASIC, STANDARD, PROFI series. Performance from 0 to 20 m/minute. Width range 320 mm to 1500 mm.
Titanium wire Grade 2 Vt-20 2v
Applications: Designed for delivering treated water (feedwater) at the pumping temperature of up to 438K (165C) into the fossil-fueled stationary boilers with absolute steam pressure of maximum 13.7 MPa (140 kgf/cm2). Capacity, Q = 100 m3/h, Head, H = 580 m, Speed of rotation, 2970 rpm, NPSHr = 4 m. The pump units shall be rigidly anchored to the foundation, and piping shall be also rigidly connected to the pumps. The pumps are motor-driven horizontal, centreline-supported, between-bearings multistage ring-section centrifugal pumps with single flow impeller arrangement. The pump casing comprises a suction casing, a delivery casing and a set of stage casings, which are concentrically aligned with respect to each other on rabbeted fits and are bolted together with tie bolts. Diffusers are built in the stage casings and delivery casing. The suction and delivery casings have flanged suction and discharge pump nozzles respectively, which are oriented vertically to the top. The rotor axial thrust is automatically balanced with a balance disc. In order to ensure a normal functioning of the balancing device, its chamber is to be communicated with the suction pipeline. A bearing end cover, fitted in the non-drive side bearing housing, has a shaft position indicator for sight control of the wear of balancing device surfaces and for restraining rotor axial displacements towards the delivery side. The pump rotor is carried by the plain bearings with ring lubrication. The design of pump shaft seal chambers provides both for housing mechanical seals and for packing the stuffing boxes, which are to fed with cooling liquid. Sense of rotation of shaft in all the pumps is counterclockwise, if viewed from the drive side.
Applications: Designed for the supply of water to industrial plants and communities. They are used also for agricultural land irrigation and drainage. Capacity, Q = 400 m3/h, Head, H = 105 m, Speed of rotation, 1470 rpm, NPSHr = 4.5 m The pump units shall be rigidly anchored to the foundation, and piping shall be rigidly connected to the pumps. The TsN type pumps are centrifugal, horizontal, spiral with horizontal split casing, with transfer channels, two- or four-stage, with single-entry impellers symmetrically arranged on the shaft according to type BB1 or BB3 API 610. The pump rotor is supported by grease-lubricated roller bearings. Shaft seals are gland packing. The pump casing is the main part of the pumps, which consists of the lower and upper half of the casing, connected together by studs.
Applications: Designed for handling condensate in the steam and water circuit systems of the thermal power stations that burn organic fuel. May be also used to transfer water in heating plants and water supply systems. Performance of the Pump: Capacity, Q = 80 m3/h, Head, H = 155 m, Speed of rotation, 2940 rpm, NPSHr = 1.6 m The pump as a component of the pump unit is an electrically driven horizontal multistage ring-section centrifugal pump between bearings, with single flow impeller arrangement. The suction casing, delivery casing and stage casings are bolted together with tie bolts to form a pump casing. The suction nozzle integrally cast with the suction casing is located horizontally at side (radially to the pump centerline). The discharge nozzle integrally cast with the delivery casing is oriented vertically upwards. The pump casing is supported at the bottom with feet integrally cast with the suction and delivery casings. The pumping unit alignment is maintained during its operation due to dowelling the delivery casing to the baseplate, whilst the other end of the pump can slide axially thus allowing for free expansion of static components.
D 2500-62-2-S UKhL4 ( 2500-62-2- 4) make Between-Bearings Double Flow Axially Split Pumps Pump parameters: Capacity, Q = 2500 m3/hr, Head, H = 62 m, Speed of rotation 980 RPM, NPSHr = 6 m/ Applications: Designed for the supply of water to industrial plants and communities. They are used also for agricultural land irrigation and drainage. Design: The pump units shall be rigidly anchored to the foundation, and piping shall be rigidly connected to the pumps. The pumps are electrically driven horizontal, foot-mounted, single-stage, axially split volute casing centrifugal pumps with a double entry radial impeller. The pump casing is a locating part of the pumps, which incorporates a lower and an upper casing halves bolted together by means of studs. Pump shaft sealing is by means of packed glands. Sense of rotation of shaft in all the pumps is counterclockwise, if viewed from the drive side. Upon the Customer request, the pumps may be supplied with a rotor for reverse rotation.
Our machine can operate with electrical and diesel engine.
Aerodynamic Grain Cleaner AGM The AGM model separators can effectively clean the crop from debris and various impurities, and separate it into different fractions, depending on the size of the particles. Models are available in various capacities and specifications (from 5 to 50 t/h). 1 year warranty Principle of operation The principle of operation: the grain (source material), falling under the influence of the air flow, depending on the weight, shape, surface roughness, floatation of each grain, has a different trajectory of flight. This makes it possible to clean both fine seeds or grains as well as coarse seeds (beans, beans, maize).
1) Drive mode: Hydraulic drive with 2 individual hydraulic pump 2) Max. pulling and clamping force: 10T 3) Motor power: 3KW2 4) Pulling speed: 0.1m 1m/min 5) Heating system: 6 heating zones with heating blocks (option: heating plate) 6) Heating temperature range: 0-300 with control precision ±1 7) Max. Clamping Space: 600mm 300mm 8) Clamping method: from up to down 9) Max hydraulic system pressure: 10Mpa, with cylinder diameter 110mm 10) Electric control: PLC station with English text display which enjoys the function of speed indication. 11) Linear guide with stainless steel dust cover. 12) Overall dimensions: 10m(length) 0.9m(width) 1.6m(height)
Oil gear pump type is designed for pumping petroleum products (petroleum, fuel oil, diesel, bitumen) that do not contain mechanical impurities, as well as other fluids with a lubricating capacity. Kinematic viscosity from 75 mm²/s (cSt) to 1800 mm²/s (cSt) (10 250 ). Working temperature of fluid from 10 C to 70 C.
Gear pumps Suitable for viscose and cellulose acetate Cast iron/steel body Variations of connections and designs on demand Every pump manufactured by manufacturer is subjected to such tests Conditions and results of pumps tests at special stand Test liquid mineral oil Shaft rotation frequency 25 rev/min
FINISHING PUMPS: Suitable for yarn lubrication High mechanical and chemical resistance steel Variations of connections and designs on demand
GEAR PUMPS FOR PAN, NITRON: Suitable for melted polymers (PAN, Nitron) and man made fibers High mechanical and chemical resistance steel Variations of connections and designs on demand
