Elderberries are used in the food industry for the production of pies, jellies, jams, ice cream, yogurt and alcoholic beverages. In folk medicine, it has been used for centuries as a medicinal plant because anthocyanins are known phytochemicals that are good for human health. The elderberry harvesting season usually lasts from mid-August to mid-September, depending on the region and variety. The harvesting climate in the south of Ukraine preserves all the useful properties of elderberries The berries are dried at 140 degrees Fahrenheit (60 degrees Celsius). Next, the berries are triple-cleaned. - Wild plants. - Humidity (10% -12%). - The maximum amount of green to 0.1%. - Purification method: color-sorting machine - Packaging (weight 25 kg) - Production capacity - from 50 tons
The berries are balls up to 2 cm in diameter and are a bright purple-blue color when ripe, but dried juniper berries are much darker, almost black with a violet cast. They taste slightly bitter and have a slight turpentine flavor. But most of all they are valued for their resinous pine aroma, for which the berries are considered a spicy spice.
From rowan berries are prepared healing infusions, drinks, teas, jams, jellies, juices. The rowan berries grow wild in ecologically clean regions of Ukraine. They are harvested in the forests, on the hills. The rowan berries turn red as early as August, but they are usually picked in October after the first frosts. Raw material is delivered to our company, where it is dried in a thermostatically controlled room. After that, the fruits are cleaned of peduncles and twigs, leaves, and unripe berries. - Wild plants - Natural drying - Humidity (9%-11%) - Maximum amount of green up to 0,1%. - Cleaning method: color-sorting machine - Packaging (weight 25 kg)
Roasted Dry Fruits
Prunus padus, fructus
Juniperus communis, fructus
Rubus idaeus, fructus
Sophora japonica, fructus
Arinia melanocirpa, fructus
Prunus domestica, fructus
Ribes nigrum, fructus
Crataegus laevigata, fructus
Prunus spinosa, fructus
Vaccinium myrtillus, fructus
Phaseolus vulgaris, fructus
Frozen strawberry
Rosehip (rosa canina ) shell, seeds , whole fruits, fine cut, CS , powder.
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
Frozen strawberries from Ukrainian producer. Grades: A, B, C, organic and non organic. Packaging Detail: carton box 10 and 25 kg, polypropilen bag 25kg, paper bag 25-30kg, plastic box 250-300g, or on demand of client The company is a Ukrainian manufacturer of frozen fruits and vegetables, on the market for 10 years. Our business includes the entire production process from growing, harvesting to freezing and marketing. Our production is located in several regions of Ukraine. We produce frozen berries and vegetables and Organic Products, we have a Euro Standard certificate for Organic berries and vegetables. We have a wide range of products from the manufacturer: - Raspberries - Strawberry - Blackberry - Blueberry - Cherry - Cranberries - Red and black currants - Obliphiha - Aronia - Apple - Pumpkin - Zucchini - Melon - Pepper - etc. Will provide the prices, certificates and all detailed information.
IQF Raspberry Rubus idaeus Package - 5-ply carton box with blue polyliner 10kg
