Lead Alloys Ingot
Lead Ingot
Lead ingots origin China Size:645*128*90mm Packing:lead ingot was wrapped by galvanized steel belt, 25pcs perbundle, about 1200 kg sperbundle. Price 1700USD CIFpayment 20% deposit TT and the final payment is paid after the container is sealed.
Artemisia absinthium, herba High quality dried organic or conventional Absinth wornwood herb for wholesale Preparations from the plant are used to stimulate appetite and improve digestion. The herb is included in choleretic and appetizing teas. Hamazulene, a substance isolated from wormwood, has an anti-inflammatory and antispasmodic effect and is used for X-ray burns, eczema, rheumatism and bronchial asthma.Wormwood is eaten by animals, stimulates appetite and improves digestion, but gives their milk a bitter taste. Bitter wormwood is used in liquor-vodka production to prepare vodka, liqueurs, vermouth, absinthe, but long-term use of such drinks leads to strong excitement of the nervous system. When brewing beer, it is used instead of hops. Country of origin - Ukraine
Product Description - Our products include Slick and Spiral exclusively forged HWDP (not welded or hot rolled material). Product origin - Sumy, Ukraine - UA Key Specifications/Special Features - Certification and standards: API Spec 7-1, API Spec 7-2, Q1 and ISO 9001, ISO 29001 and NS-1 Slick and Spiral exclusively forged HWDP (not welded or hot rolled material) Type I / Type II with one or two central upsets, Type III Spiral with one central upset Steel grade: AISI 4145H mod, fully heat treated as per API Specification At customer request it is possible to produce HWDP from non-magnetic and H2S resistant steel grades Technical parameters OD: from 88,9 mm (3 1/2) up to 168,3 mm (6 5/8) Standard length: 8300 mm, 9450 mm, 12250 mm, 12500 mm Standard API and double shouldered thread connections are made with stress relieved elements, cold rolled and phosphated, and equipped with pressed steel or heavy duty plastic thread protectors at both ends Hard banding of ARNCO 350XT, Castolin OTW 13CF, tungsten carbide Ultimate tensile strength: min 140 000/965 ksi/mPa, Yield strength: min 110,000/758 ksi/mPa, Elongation: 15%, Impact strength: min 48J, Brinell hardness: min 285-341 HB Mechanical properties guaranteed to 1below steel surface.
Length - 11.80mtrs. Dia. - 1.82mtrs. Wall thickness - 14mm. Weight - 8mt./pipe. The Pipes are spiral welded The pipes external surface is plastic quoted. The innner surface of the pipe is painted.
We can offer the following steel pipes: OD 530 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 550 USD OD 630 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 570 USD OD 720 mm x WT 7-9mm. Quantity 3000 tn. FOB Novorossijsk 525 USD OD 820 mm x WT 8-9mm. Quantity 2000 tn. FOB Novorossijsk 540 USD OD 1020 mm x WT 10-12mm. Quantity 1000 tn. FOB Novorossijsk 570 USD OD 1220 mm x WT 12-13mm. Quantity 1000 tn. FOB Novorossijsk 570 USD OD 1420 mm x WT 15.7-16.8mm. Quantity 3000 tn. FOB Novorossijsk 590 USD Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products. -
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
Steel pipes 1020mm x10-12mm We can supply steel pipe OD 1020 mm x WT 10-12mm. Quantity 1000 tn. FOB Novorossijsk 570 USD. Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products. For more information can write directly to . I can offer delivery pricing.
We can offer the following steel pipes: OD 530 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 550 USD. Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
We can supply used steel pipe OD 720 mm x WT 7-9mm. Quantity 3000 tn. FOB Novorossijsk 525 USD. Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
We can supply used steel pipe OD 820 mm x WT 8-9mm. Quantity 2000 tn. FOB Novorossijsk 540 USD. Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products. .
Steel pipes 1420mm x15.7-16.8mm We can supply steel pipe OD 1420 mm x WT 15.7-16.8mm. Quantity 3000 tn. FOB Novorossijsk 590 USD. Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
Steel pipes 1220mm x10-12mm We can supply steel pipe OD 1220 mm x WT 12-13mm. Quantity 1000 tn. FOB Novorossijsk 570 USD. Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products. For more information can write directly to . I can offer delivery pricing.
We can offer the following steel pipes: OD 530 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 550 USD OD 630 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 570 USD OD 720 mm x WT 7-9mm. Quantity 3000 tn. FOB Novorossijsk 525 USD OD 820 mm x WT 8-9mm. Quantity 2000 tn. FOB Novorossijsk 540 USD OD 1020 mm x WT 10-12mm. Quantity 1000 tn. FOB Novorossijsk 570 USD OD 1220 mm x WT 12-13mm. Quantity 1000 tn. FOB Novorossijsk 570 USD OD 1420 mm x WT 15.7-16.8mm. Quantity 3000 tn. FOB Novorossijsk 590 USD Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
We can offer the following steel pipes: OD 630 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 570 USD. Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
Our Company supply welded and seamless pipes of stainless steel and alloys. Manufacturing of Europe and China. Diameter from capillary to 2000mm and more according to the order. Also, the details of pipelines (fittings, flanges).
Plain gauges plain cylindrical gauges plain conical gauges, screw gauges for metric threads for the trapezoidal threads, spline gauges, tools for cold pipe rolling, gauges for pipe casting and tubing, cutters and tooling for cnc machines bohrstanges and tool frames cutters, cutting tool, special measuring tool, we can repair, constructing, calibrate and provide verification of measuring instruments and special tool
