Titanium wire Grade 2 Vt-20 2v
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
The fiberglass mesh (GFRP) is made of fiberglass and epoxy resin. Fiberglass mesh is bars bonded with each other, which forms a very solid to all kinds of mechanical and chemical influences bars. For the production of our products, we use only fiberglass direct roving (E-glass type) and epoxy resin. We produce GFRP mesh d 2-4mm in rolls of 50m2 or 100m2 (1m or 2m high) or in sheets (sizes are discussed individually).
Welding electrodes, welding rods, welding consumables.
1) composite rebar (gfrp) d 4 32mm 2) composite mesh (gfrp) d 2 4mm (50*50, 100*100, 150*150 and 200*200) 3) glass fiber for concrete 4) gfrp bent elements.Wholesale trade, customs clearance, delivery services.
Copper, steel plates, steel wire, copper scrap.Shipping and logistics
Power hand toos tools, non power hand tools., welding inverter and mma., consumables, cutting and grinding disks, welding electrodes.
Gadgets and mobile accessories, portable speakers, car electronics and accessories, smart watch, usb cables and adapters, charging device, headphones, laptop backpacks, power bank.
Iron scrap, stainless steel scrap.
Titanium ingots, titanium slabs, titanium bars, titanium plates, sheets, titanium seamless tubes and wire, titanium tanks.
Titanium ingot Electron-beam single melted Surface machined Ti6al-4v dia 370-400mm Grade-2 dia 600-800mm
Titanium bars Titanium hot-rolled bars Titanium forged bars
Titanium sheets plates Titanium rolled sheets 0.5 to 70mm thickness
Titanium slab Titanium slabs grade-2, vt1-0
«contrrust» is environmentally-friendly rust converter based on natural products and water . It converts rust into bluish-black, protective, natural polymer which stops further rusting and also can be used as primer. Ideal for iron or steel. Will not work on aluminum, copper, stainless steel, or galvanized metal. Key advantages: - “green” product, not toxic, not polluting - no mineral acids, no damage to surface - no need for additional surface preparation and after-treatment - work in hardly accessible places - no additional equipment is needed - life time of the steel is 6-12 times longer compared to using competitive remedies. Application areas Industrial fabrication Machinery & equipment manufacturing Building construction Ports & docks Shipping industry Automobile industry Locomotive and railways Installation of petroleum and petrochemical industries Oil & natural gas installations Spreading rate: 60-200 g/m2 (depending on thickness of rust layer) 5, 20, 50, 100 or 1000 liters container.
Maximum active power - 4.8 kW; Maximum power consumption - 7.4 kVA; Voltage regulation range in MIG mode - 13-23.5 V; MIG welding wire nominal diameter - 0.6-1.0 mm; Maximum diameter of MIG filler wire - 1.2mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 2.5-13 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-160 A; Welding electrode diameter - 1.6-4 mm; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 25% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V. Number of power transistors - 6; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW; Maximum power consumption - 6.6 kVA; Voltage regulation range in MIG mode - 13-22 V; MIG filler wire nominal diameter - 0.8-0.9 mm; Max.MIG filler wire diameter - 1.0mm; Welding wire type - copper-plated / flux-cored; Wire feed speed - 1.5-9 m / min; Diameter of wire spools to be installed up to - 200 mm; Current regulation range in MMA mode - 20-140 A; Modes of operation MIG - 2T / 4T / Spot time; Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC); Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC); Efficiency - 93%; Hot start - yes; Anti stick - yes; Arc force - yes; Open circuit voltage - 65 V; Number of power transistors - 4; Nominal mains voltage - 230 ± 10% V; Current frequency - 50/60 Hz.
Maximum active power - 3.9 kW Maximum power consumption - 6.6 kVA Voltage regulation range in MIG mode - 13-22 V MIG welding wire nominal diameter - 0.6-1.0 mm Max.MIG filler wire diameter - 1.0mm Welding wire type - copper-plated / flux-cored Wire feed speed - 1.5-9 m / min Diameter of wire spools to be installed up to - 200 mm Current regulation range in MMA mode - 20-140 A Welding electrode diameter - 1.6-4 mm Modes of operation MIG - 2T / 4T / Spot time Machine duty cycle at maximum MIG current - 60% (25�ºC) / 20% (40�ºC) Duty cycle of the apparatus at maximum current MMA - 100% (25�ºC) / 60% (40�ºC) Efficiency - 88% Hot start - yes Anti stick - yes Arc force - yes Open circuit voltage - 65 V Number of power transistors - 4
Blogger Set Gelius Pro Life Hack GP-BS001 The blogger Set Life Hack is your indispensable assistant in professional content filming, publishing it on Instagram and Facebook, YouTube and other Internet resources. The set includes: 1. Special ice lamp-ring - allows you to adjust the lighting and direct it to a specific object, in order for your videos, photos to be ideal. Specifications: Outside diameter - 26 cm. The inner diameter is 20 cm. Three lighting modes - cold, warm and neutral Three light intensity modes - weak, medium, strong Temperature range - 3000-6500K Voltage: 5V Power: 8 - 10 W Power Source: USB 2m. wire DC5V 2. Tripod tripod - allows you to fix the lamp with the holder in a stable and desired position and also convenient to carry when the tripod is in the assembled state. Specifications: Height in assembled condition - 19 cm. Disassembled height - 12 cm. 3. Wired microphone with clothespin - allows you to clearly record sound with the help of a double Jamproof condenser, a special shielding, silent, tensile cable 1.8 m., And with the help of a clothespin it can be placed on clothes and not hold in hands. Specifications: Microphone Type: Omni - MD06050L Condenser Capacitor Frequency Response: 20 Hz - 16 kHz Sensitivity: - 38 + Resistance 3 dB:
Main Features: Bluetooth Chipset: JieLi 6904 Bluetooth Ver. 4.2 Micro SD card play FM Radio Aux In Rechargeable lithium-ion polymer battery Built-in MIC for hands free calling On-headphone control or Gelius Connect APP Control 40mm high quality neodymium driver Adjustable headband to fit any head size Swivel ear cups for easy storage and carrying Soft leatherette earmuffs for long time comfort Connectivity: Connection type Wireless, Wired Connector type 3.5mm Connector type Straight Wireless protocols Bluetooth Bluetooth version Ver. 4.2 Wireless range 10m Bluetooth profiles AVRCP, A2DP, HSP, HFP Cable detachable Yes Audio: Microphone 0d Yes Frequency response 20Hz-20KHz Driver size 40mm neodymium Impedance 32ohm Microphone: Microphone type Condenser Pick-up pattern Omnidirectional Power: Lithium-ion battery 200mAh Charging time Approx. 2 hours TF Card Play: Audio formats MP3, WAV, WMA Micro SD card capacity 32GB (Max) FM Radio Frequency 87.5MHz-108MHz Standard accessories USB Charging Cable, Operation Manual
