Nickel plates 99.99% TT is 30% of the deposit and the final payment is paid after the container is sealed Price 20 000 USD CIF LC Payment FOB
All types of rebars. Price after loi. For serious buyers! from 10000 mt/month. Standart rebar packing.
Nickel wire.
Steel bars, wire rod, hot rolled coils, sheets, re-bars, rebar.Shipping
Titanium slabs, ingots, bars, titanium alloys.
Titanium ingots, forged bars, rolled bars, sheets, plates, seamless tubes, wire.
Titanium bars, wire, rods, tubes, pipes, sheets and plates.
Titanium materials:titanium ingots, titanium bars, titanium sheets, titanium plates, wire, titanium pipes.
Cranck shears Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 6,3)3150mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model - 3418+ ¦a) thickness*width of the sheet ,mm 6,3*3150 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 11,8 Dimensions, mm 4000)1900)1700 Weight, kg 6200 Guillotine shears model -- 3316++ Crank metal sheet guillotine shears with the inclined blades (model --3316+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 4,0)2500mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3316++ ¦a) thickness*width of the sheet,mm 4,0*2500 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type manual back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 8,5 Dimensions, mm 3300)1630)1520 Weight, kg 3870 Guillotine shears model -- 3314+ Crank metal sheet guillotine shears with the inclined blades (model --3314+) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section (50 kgf/mm2) and the maximum cross-section 2,5)1600mm/ The guillotine shears are used at the machinery-building companies, farming machinery building, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3314+ ¦a) thickness*width of the sheet,mm 2,5*1600 ¦a) stripe length as to the back gauge, mm 630 Gap adjustment, type Manual/screw back gauge drive, type manual Stroke frequency, p/min 65 Main drive,KWt 3,2 Dimensions, mm 2300)1570)1470 Weight, kg 2000 Guillotine shears model -- 3416 Crank metal sheet guillotine shears with the inclined blades (model -3418) are meant for the sheet metal cutting with the ultimate strength 500mPa and the maximum cross-section 4,0)2000mm. It is also suitable for the cutting of non-metal materials, except the materials that might cause the blades to become blunted fast or material to crack. The guillotine shears are used at the machinery-building companies, aircraft building, shipbuilding, etc., as they have high efficiency due to the absence of preparatory time for blades readjustment to the different cutting thickness and due to the motorization of the back gauge. Specification Model -- 3416 ¦a) thickness*width of the sheet, mm 4,0*2000 ¦a) stripe length as to the back gauge, mm 700 Gap adjustment, type automatic back gauge drive, type motorized Stroke frequency, p/min 60 Main drive,KWt 5,6 Dimensions, mm 2610)1600)1510 Weight, kg 2870 Guillotine shears model --478 Crank metal-sheet guillotine shears with the inclined blades (model --478) are meant for the straight cross and longitude cutting. The cutting is done at one stroke according to the sketching. The shears can be operated in the outdoor conditions as well as at in the enclosed space at the temperature conditions - 20¦- +40¦-. Specification Maximum thickness, mm 16 Maximum width, mm 2200 Mains current 3 phases, AC Frequency, Hz 50 Operating voltage, V 380 Stroke frequency 20 Engine power, KWt 30 Dimensions, mm 3150/2275/2350 Weight, kg 9800 Guillotine shears models --+ 3214 Model --+ 3214 ¦a) thickness*width, mm 2,5*2500 Stroke frequency, p/min 33 Main drive,KWt 3 Dimensions, mm 3120)2000)1330 Weight, kg 1800 Crank metal sheet guillotine shears model --+ 6020 H6 * L2500mm Designed for the sheet cutting with the thickness up to 6 mm. Technical features: electric-powered drive, that excludes the usage of compressed air. Gear drive and muster clutch are working in the oil reservoir. The angles and bars, round bars cutting can be done with the special blades/ Specification Max cutting thickness, mm 6 Max cutting width, mm 2500 Stroke frequency, min-1 50 Power, KWt 8,5 Dimensions, mm 3400)1400)1450 Weight, kg 3650
High quality Leonardite from our own Ukrainian mine. Product Description Humic acid 78% Moisture 57% Content of metals: zinc 46, 6 ;g/g manganese 33, 1 ;g/g copper 27, 6 ;g/g nickel 16, 9 ;g/g cadmium 0, 32 ;g/g plumbum 17, 7 ;g/g bulk or by your request 7-10 days to FOB port after agreement was signed
Polyethylene pressure pipes PE-100 for sewerage systems. Polyethylene pressure pipes for sewerage are used for construction and repair of outdoor pipelines, transporting water of household and drinking supply.Leading raw suppliers are European manufacturers SABIK, TOTAL. Pipes are made of polyethylene PE 100 class and correspond to standard dimension ratio SDR 41 - SDR 6, with nominal diameters from25to500 mm, including main working pressures 4; 6; 8; 10; 12,5; 16; 20 bar. Pipes, produced in linear segments, have the length 12 m (or another by agreement with the customer). Pipes with diameter not more than 160 mm can be produced in hanks (cylinders) from 50 to 1000 m. Pipes with diameter up to 110 can be connected by means of mechanic (compression) fittings. Polyethylene pipes of major diameters are connected mainly by means of jam-weld or by means of thermistor fittings that requires special welding equipement. Such connection is monolithic and considered to be the most reliable. -------- Polypropylene casing pipes with connecting threads for the construction of water supply wells and also production wells. The sinking of wells using casing pipes allows to avoid groundwater pollution, and also increase the speed of sinking thanks to reduced diameter in comparison with usual steel pipes. Blue casing pipesfor wells have the following diameters: Pipes are made of copolymere propylenes, which have better mechanical and ecological chracteristics than PVC pipes for wells. ------- Two-layered fluted polymeric pipes for outdoor sewerage (POLYCORR). Polymeric pipes corresponds to the requirements of European standard project EN1401-1; 1999,material for pipes production-block-copolymer polypropylene PP of leading European manufacturers BASELL,?V?.Nominal bore D 200, 300, 400, 500, 600, 800,? type of tube, circular rigidity SN4, SN8,SN16. Pipes produced by means of continuos extrusion method, have double closed structure of wall. The smooth inner surface and the corrugated outer wall. Pipes are connected by means of flayers, produced on the pipes during production process. The color of standard pipes and molded pieces for sewerage -ginger, the color of inner walls of pipes - white. PP pipes are designed for nonramming underground systems of public sanitary and storm water drainage.
