Ukrainian Auto Rickshaw Spare Parts Suppliers and Manufacturers

Barbara vulgris, herba High quality winter cress herb for wholesale. Common cress is used as a medicinal plant. The above-ground parts of the plant are collected for medicinal purposes. Its leaves are rich in ascorbic acid, and its seeds are rich in thioglycosides. Crescent has a wound-healing and diuretic effect and stimulates the appetite. Used as an antiscorbutic agent. Stems, leaves and inflorescences, which are harvested during flowering, are used as medicinal raw materials. Soup, puree, and side dishes are prepared from the green parts of the common rapeseed. Mostly young leaves and unblown inflorescences of colza are used in cooking. Its leaves taste a little like mustard. We provide drying of our products meeting all requirements to keep max of useful substances. Country of origin - Ukraine

Goat herb Galega olficinalis High quality dried Galega herb for wholesale The herb (lat. Herba galegae) is used for treatment. The above-ground part of the plant is collected, the tops of flowering plants 20-25 cm high are cut off and they are quickly dried. Used in folk medicine as a remedy against diabetes; also used to increase lactation, as a diuretic and diaphoretic. The plant is poisonous. We provide drying of our products meeting all requirements to keep max of useful substances. Country of origin - Ukraine

Robinia pseudoacacia, radicer High quality False acacia flowers and/or bark for wholesale In traditional medicine different parts of Robinia pseudoacacia are used as laxative, antispasmodic, and diuretic. The flowers are sometimes used to produce a sweet and perfumed jam. Seeds and flowers contain up to 12% essential oil and are used in perfumery. We provide drying of our products meeting all requirements to keep max of useful substances. Country of origin - Ukraine

Artemisia annua, herba High quality dried Annual wormwood for wholesale Annual wormwood is a common and well-known medicinal plant. The plant is widely used in medicine. The aerial part of the plant is used as an aromatic seasoning for culinary products. The essential oil is suitable for use in the perfume industry and soap making. We provide drying of our products meeting all requirements to keep max of useful substances Country of origin - Ukraine

Taraxacum officinale, radices High quality dried organic or conventional Common dandelion root for wholesale Dandelion leaves, flowers, and roots are all edible. Dandelion roots are rich in inulin (up to 40% in autumn), sugars (up to 18% in autumn): fructose, sucrose, galactose. All parts of the dandelion can be used in cosmetology: stems, leaves, petals and roots.And of course is used in medicine. We provide drying of our products meeting all requirements to keep max of useful substances Country of origin - Ukraine

Taraxacum officinale, folia High quality dried organic or conventional Common dandelion leaf for wholesale Dandelion leaves, flowers, and roots are all edible. Dandelion leaves are rich in phosphorus, calcium and iron, contain many proteins, which increases their nutritional value. All parts of the dandelion can be used in cosmetology: stems, leaves, petals and roots.And of course is used in medicine. We provide drying of our products meeting all requirements to keep max of useful substances Country of origin - Ukraine

Echinacea purpurea, flores High quality echinacea for wholesale. Echinacea gained world fame as an immunomodulator of natural origin. It mainly stimulates cellular immunity, activates the body's resistance. Biologically active substances, especially valuable microelements, are contained in the root and aerial part, most often in the inflorescence, which is collected during flowering. So, in addition to the immunomodulating effect, this plant also has antimicrobial, antiviral, fungicidal, anti-inflammatory, antioxidant, and antiallergic properties. We provide drying of our products meeting all requirements to keep max of useful substances. Country of origin - Ukraine

Sambucus ebulus, radices High quality dried dwarf elder for wholesale Dwarf elder (Sambucus ebulus L) is one of the best known medicinal herbs since ancient times. In view of its benefits as a widely applicable phytomedicine, it is still used in folk medicine of different parts of the world. In addition to its nutritional values, dwarf elder contains different phytochemicals among which flavonoids and lectins are responsible for most of its therapeutic effects. Dwarf elder has been used for different ailments including: joint pains, cold, wounds, and infections. We provide drying of our products meeting all requirements to keep max of useful substances. Country of origin - Ukraine

Common Wormwood (mugwort) Artemisia vulgaris High quality dried Common wormwood for wholesale The aerial part of the plant is used as a spicy seasoning for various dishes, especially fatty ones. Wormwood is a medicinal plant. The herb is used as a medicinal raw material - leafy flowering tops collected during flowering and dried. Wormwood improves appetite and digestion, has a tonic, sedative, hematopoietic, wound-healing, choleretic and mild laxative effect; improves stomach function and helps with fever. We provide drying of our products meeting all requirements to keep max of useful substances Country of origin - Ukraine

Rumex confertus, radices High quality horse dock root, herb for wholesale Dishes made from horse sorrel leaves are very popular. Not fresh leaves are used, but dried ones - during drying, fermentation occurs, and they acquire a pleasant taste, and the characteristic bitterness disappears. Extract from the roots and rhizomes gives a yellow dye; leaves and stems give a green dye. The rhizome can be used to tan leather. In veterinary medicine, the roots are used for intestinal and skin diseases. The roots are used in the tanning industry and as a dye. All parts of the plant are used for medicinal purposes, separately - leaves with petioles, fruits in panicles, root (lat. Radix Rumicis conferti) We provide drying of our products meeting all requirements to keep max of useful substances. Country of origin - Ukraine

Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance. Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound. Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives. Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery. Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.

REBCO (Russian Export Blend Crude Oil) is a sort of Russian Export Crude Oil with a mixture formed in the system of pipeline Transneft by mixing heavy sour crude Ural from the Volga region and low-sulfur oil in Western Siberia, the relevant characteristics to the brand Urals. Urals brand oil is supplied through the Baku-Novorossiysk pipeline system and the Druzhba pipeline. Components of petroleum are separated using a technique called fractional distillation, i.e. separation of a liquid mixture into fractions differing in boiling point by means of distillation, typically using a fractionating column. Petroleum includes not only crude oil, but all liquid, gaseous and solid hydrocarbons. Our company exports to contries such as Malasia, Singapore, China, Taiwan and all countries in Europe and parts of Africa We'll be glad to have a deal with you.

D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.

Modern mineral base oils are the result of a long and complex distillation and refining processes. The feedstock used is crude oil. This substance is not of uniform quality but consists of several thousands of hydrocarbon compounds in which the elements carbon and hydrogen are present in all molecules and, in part, are bound to other elements. The hydrocarbons can be divided into three main groups: paraffinic, naphthenic and aromatic. Paraffinic hydrocarbons can be further divided into two subgroups: normal paraffinic and iso- paraffinic. Paraffinic hydrocarbons are the best lubricants. The distillation process in the refinery separates the hydrocarbons contained in the crude into cuts based on the molecule size. Furthermore, as many unwanted substances as possible are removed in the process, such as sulphur, aromatic hydrocarbons, paraffin wax, etc. In other words the mineral oil production process is physical cleaning and the end product is so-called paraffinic base oil. Most of the hydrocarbons in the base oil are paraffinic, but it also contains naphthenic and aromatic molecules. When the finished lubricant, such as motor oil, is made of these, several additive compounds are used to improve the base oil properties. The final outcome can also be so-called naphthenic base oil, where most of the hydrocarbons are naphthenic. Their cold properties are excellent.

Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-75/99. GOST is the Russian system of standards. Mazut is almost exclusively manufactured in the Russian Federation, This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product has a high viscosity which drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: - "Very Low Sulphur" is mazut with a sulphur content of 0.5% - "Low Sulphur" is a mazut with a sulphur content of 0.5-1.0% - "Normal Sulphur" is a mazut with a sulphur content of 1.0-2.0% - "High Sulphur" is a mazut with a sulphur content of 2.0-3.5% - Very Low Sulfur mazut is generally made from the lowest sulfur crude feedstocks.

Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0% High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5% The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential. When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.

Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0% High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5% The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential. When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.