DECOPANEL decorative insulation panels : is a new type of product for interior and exterior decoration, beyond it is appearance it solves problems about insulations : heat, fire and sound. This new sandwich panel has three layers ; coated aluminium or steel alloy sheet layer with nano protective layer outside, PU polyurethane foaming middle layer and aluminium foil layer. The production can be made in a large variety of surface textures even with wooden, marble, wallpaper appearance. Can be produced in requested lengths up to 6 meters. Panels with 10 mm thickness can be used for internal or external, 30 mm thickness can be used for external applications. Our production line has 4 different section types of panel s. It has so many advantages when compared to traditional wall covering materials. 1. THERMAL INSULATION â?¢ When applied at wall&ceilings it provides a temperature difference of 7 degrees. It prevents the increase of indoor temperature at hot seasons, likewise it prevents the heat loss in cold seasons. Therefore decopanel provides a comfortable living area in all cond 2. SOUND INSULATION It provides 29 DB de So it should be applied in places where soun itions. crease in nc d insulation ise when applied to walls. s crucial like hospitals, hotels, labaratories,schools, assembly rooms, office buildings. 3. EIREPREVENTIONâ?¢ This product has passed the fireproof grade B1, so basically meets the engineering requirements of fire. 4 HARDNESS.L The production combines the aluminium or galvanized steel alloy plate and polyurethane which makes a substantial increase in strength and hardness. So can be applied to all kinds of wall and ceilings. 5. MOISTURE PROOF â?¢ It prevents the temperature differences at walls&ceilings so wetness and moisture does not occurs. 6. GREEN ENVIRONMENTALPR_OTECTION â?¢ All raw materials adopted by the product is environmental protection material, zero emission, zeroformaldehyde, zero toxic gas oscillation. 7. INSTALLATION CONVENIENCF ft I IGHTNESS_â?¢ It can be applied on existing wall&ceiling but also it can be used in partition wall and suspended ceiling applications. So it is much more labor-saving and time-saving product from traditional old wall&ceiling covering materials. 8. LIGHTNESS.: It is a light material so when used to produce partition walls and suspended ceilings. It does not increase the total weight of the building also does not increase earthquake load. 9. SURFACE_DURABILITY â?¢ The surface of product can not be deformed, damaged and can be cleaned easily. 10. SAVE SPACE : It does not installed by any chassis, it can be directly mounted on the wall using screws or punches. This provides 5-10 cm saving of wall space. THICKHNES: 1 mm WIDTH: 4 mm We can be produced in any length up to 6 meters
DECOPANEL decorative insulation panels : is a new type of product for interior and exterior decoration, beyond it is appearance it solves problems about insulations : heat, fire and sound. This new sandwich panel has three layers ; coated aluminium or steel alloy sheet layer with nano protective layer outside, PU polyurethane foaming middle layer and aluminium foil layer. The production can be made in a large variety of surface textures even with wooden, marble, wallpaper appearance. Can be produced in requested lengths up to 6 meters. Panels with 10 mm thickness can be used for internal or external, 30 mm thickness can be used for external applications. Our production line has 4 different section types of panel s. It has so many advantages when compared to traditional wall covering materials. 1. THERMAL INSULATION When applied at wall&ceilings it provides a temperature difference of 7 degrees. It prevents the increase of indoor temperature at hot seasons, likewise it prevents the heat loss in cold seasons. Therefore decopanel provides a comfortable living area in all cond 2. SOUND INSULATION It provides 29 DB de So it should be applied in places where soun itions. crease in nc d insulation ise when applied to walls. s crucial like hospitals, hotels, labaratories,schools, assembly rooms, office buildings. 3. EIREPREVENTION This product has passed the fireproof grade B1, so basically meets the engineering requirements of fire. 4 HARDNESS.L The production combines the aluminium or galvanized steel alloy plate and polyurethane which makes a substantial increase in strength and hardness. So can be applied to all kinds of wall and ceilings. 5. MOISTURE PROOF â?¢ It prevents the temperature differences at walls&ceilings so wetness and moisture does not occurs. 6. GREEN ENVIRONMENTALPR_OTECTION â?¢ All raw materials adopted by the product is environmental protection material, zero emission, zeroformaldehyde, zero toxic gas oscillation. 7. INSTALLATION CONVENIENCF ft I IGHTNESS_â?¢ It can be applied on existing wall&ceiling but also it can be used in partition wall and suspended ceiling applications. So it is much more labor-saving and time-saving product from traditional old wall&ceiling covering materials. 8. LIGHTNESS.: It is a light material so when used to produce partition walls and suspended ceilings. It does not increase the total weight of the building also does not increase earthquake load. 9. SURFACE_DURABILITY â?¢ The surface of product can not be deformed, damaged and can be cleaned easily. 10. SAVE SPACE : It does not installed by any chassis, it can be directly mounted on the wall using screws or punches. This provides 5-10 cm saving of wall space. SIZES: THICKNESS : 3 mm WIDTH : 40 mm We can be produced in any length up to 6 meters
Our fabricated LED stainless steel channel letters with illuminated acrylic faces to provide outstanding low-light visibility, Get the exact combination of daylight and nightlight colors you want with a broad selection of translucent acrylic in letter heights from 6'' to 36''. Choose from polycarbonate or stainless steel backing with the brilliance of integrated LED's.
Profiles... Plastic profiles.
Stainless steel sheets
Avarage analysis : Ni: % 7,85 - 8,25 Cr: % 17,10 - 18,40 Fe: % 70 1100 kg, 1x1 meter, pressed cubes
Stainless Steel Corrugated Flexible Hose Emin flex stainless steel flexible hoses are available in stainless steel grades aisi 321, 316 , 316 l & 316 ti and near future phosphor bronze grade cusn4 by forming convolutions so that it may conveniently bend while remaining liquid and gas tight. The hoses of specific length as per requirement can be manufactured with the end fittings in flanged / threaded types. The flexible hose are available in braiding of stainless steel wire to take care of external damage and to increase pressure raitings. Stainless steel corrugated hose made with standard and close pitch corrugation from butt-welded tube can be reinforced by one or two metallic wire braids (ss 304 & ss 316). Temperature range : - 270 c to 800 c Pressure range : full vacuum to 200 kg/cm2 Nominal bores ( sizes) : +÷ - 2÷ Applications : emin flex stainless steel hoses are used for conveying air , water, oil, gases, steam, refrigerants like ammonia and freon, cryogenic fluids like liquid oxygen, argon and nitrogen, acids and chemicals like sulphuric acid, nitric acid etc. In steel plants, paper plants, power plants, tyre plants, chemical plants. Oil refineries. Air conditioning
Ferrous, non ferrous metals like copper cathode, copper ingot, aluminum billets, aluminum ingots, lead, steel rebar, cement, pet coke, urea 46, coal, steam coal furniture, table, sofa, sunflower oil, vegetable oil.Trade, source
Silicone moulding parts, metal parts, heating cables, PVC tarpaulin.
Metallic parts by welding, plasma cutting, machining parts by cnc, lathe, milling and boring machines.Manufacture
Sheet Metal Processing Machines, Air Duct Fabrication Machines, Machinery Components Hydraulic Sealant ( Rod Seal, Piston Seal, Piston Guides) And Hydraulic Valves.
Rubber hoses, hoses, metal products, CNC machining, rubber, turned parts, high and cold forging.
Aluminium ingot, billet, casting and special mould, industry specific ceramic products, cordierite, cordierite mullite refractory ceramic, boron, boric acid and derivates.
Round bar is a steel bar with a smooth surface which is used for construction that does not need high-strength reinforced concrete Works
Approx. 900kg scrap permanent magnet stepper motor
400 450 500hb Wear Resistant Plates Durostat Hardox
Aluminium Composite Panels, we have B1, B2 and A2 classes of production and have also been certified by SGS. Also our ACP coatings are under guarantee of HYDO as we use Hyro coated Aluminium Sheets on our products.
Aluminium Composite Panels, we have B1, B2 and A2 classes of production and have also been certified by SGS. Also our ACP coatings are under guarantee of HYDO as we use Hyro coated Aluminium Sheets on our products.
Product description, including the following details - Steel Rebar a. Name of product - rebar b. Price of product - USD 440-450 / ton c. Product origin - Turkey d. Key Specifications/Special Features : Steel Grade: ASTM A615 GR40,GR60,GR75 - BS 4449:97, GR460 or BS 4449:05 B500B Standard : ASTM, BS, DIN, JIS Type : Carbon Steel Bar Application: Structural Steel Bar Technique: Hot Rolled e. Harmonization System (HS) Code : - f. Minimum Order Size : 500 tonnes
Size: 8mm to 40mm Steel Grade: ASTM A615 GR40,GR60,GR75 - BS 4449:97, GR460 or BS 4449:05 B500B Standard: ASTM, BS, DIN, JIS Type: Carbon Steel Bar Application: Structural Steel Bar Technique: Hot Rolled Shipment: FOB /CIF Origin : Turkey Payment term: TT or Cash (30% upon signing the contract 70% upon shipping documents ) Min Order: 100 Ton Price : 450 USD / ton Packaging : Bulk or Container Anyway, we are able to customise all kinds of steel bars
