Aluminium composite panels consists of a thermoplastic polyethylene core that is sandwiched between to outer flat aluminium panels. The polyethylene core is bonded between the two aluminium sheets providing a very lightweight, flat, smooth and strong rigid sheet. The aluminium composite sheets can be coated with a number of coatings from pvdf or polyester paint depending on the customer requirement or process. Aluminium composites can also be produced in a wide range of colours including metallic’s and patterns that resemble woods and marbles. Pvdf and polyester aluminium composites can be found in a range of applications from building claddings to signage as a replacement to heavier and expensive substrates. Plastic wrap
Aluminium composite panels consists of a thermoplastic polyethylene core that is sandwiched between to outer flat aluminium panels. The polyethylene core is bonded between the two aluminium sheets providing a very lightweight, flat, smooth and strong rigid sheet. The aluminium composite sheets can be coated with a number of coatings from pvdf or polyester paint depending on the customer requirement or process. Aluminium composites can also be produced in a wide range of colours including metallic’s and patterns that resemble woods and marbles. Pvdf and polyester aluminium composites can be found in a range of applications from building claddings to signage as a replacement to heavier and expensive substrates. Plastic wrap
Aluminum Profile , Extrusion , Ekstrüzyon , Alüminyum , Profil
Selcuk Metal Group Semtal, Turkey. Our company exports aluminum profiles, gasket/door and window seal for door and window products to many countries.
-PE100 Pipes- Our PE 100 pipes are produced from 100% non-recycled Polyethylene 100 raw material. Types due to pressure resistance: -PN4-Dia.(mm) -PN5-Dia. (mm) -PN6-Dia.(mm) -PN8-Dia.(mm) 90 63 50 40 110 75 63 50 125 90 75 63 140 110 90 75 160 125 110 90 180 140 125 110 200 160 140 125 225 180 160 140 250 200 180 160 225 200 180 250 225 200 250 225 250 -PN 12,5-Dia.(mm) -PN20-Dia.(mm) -PN25- Dia.(mm) 25 20 20 40 25 25 50 40 40 63 50 50 75 63 63 90 75 75 110 90 90 125 110 110 140 125 125 180 140 140 200 180 180 225 200 200 250 225 225 250 250 *Mote:PN4, PN5, PN6, PN8 pipes are packed in 6m. or 12m. coils. PN10 , PN12,5 , PN20, PN25 pipes are packed in 100m. coils.
The pipe is manufactured from 100% virgin unplasticized polyvinyl chloride compound (PVC-U). No re-worked material is used. The pipe is produced under an ISO 9001-2000 Quality System. Duzgunler Plastic pipes are produced in a range of pressure ratings 4, 6, 10 and 16 Bar. Duzgunler Plastic pipes are produced in a range of nominal pressure (PN) at 20°C. The appropriate derating factors should be applied for working pressures when subjected to higher temperatures. The nominal outside diameters and nominal wall thickness are based on an overall service (design) coefficient C=2,5 from 50 mm.to 90 mm. and C= 2 from 110 to 355. Duzgunler Plastic pipe is used in a wide range of applications, such as: * Irrigation systems main/sub-mains. * Chemical industrial processes. * Pressurized water supply (city town, industrial, home, commercial.) * Drainage/sewage applications. * General services, domestic water, A/C drainage. * Ducting, electrical, telecommunication. * Industrial process plants oil/gas/petrochemical. * Desalination processes, brine disposal, mineral water Features of Duzgunler Plastic U-PVC pipes: * Fully compliant with TS 274 EN 1452 and ISO standards. * Resistant to a wide range of chemicals and corrosion. * High Impact Resistance * Quality assured and tested to the strict specifications of the standard for dimension compliance, impact resistance, burst pressure, flattening & joint tightness. * Smooth internal bore for low friction losses. * Compatible with the full range of PVC-U Pressure fittings. * Long service life under a wide range of conditions. * Will not support combustion. There are 4 types according to their pressure resistance: PN4 PN6 PN10 Pn16 Available Diameters (mm) : 50 63 75 90 110 125 140 160 200 225 250 280 315 355 400 Technical Features: Raw Material: U-PVC Standard: TS 274 EN 1452 Dimension: Pipes produced in ranging from Ø 50 mm. dia. up to Ø 400 mm. dia. Normally supplied in 6 m length Others can be supplied on request. Connection: rubber ring joint for all size Technical Features: -Gravity: 1350 < p < 1460 kg/m² -Opaque: max. % 0,2 -Deformation heat: 80 C -Resistance to diklormetan: Resistant -Quantity of vinilcloridmonome: less than 1ppm -Resistance of int. Pressure: Two times of nom pressure -Resistance to stroke: TIR < % 10 Unpacked.
EN-GJS-400-15 EN-GJS-500-7 EN-GJS-600-3
Our fabricated LED stainless steel channel letters with illuminated acrylic faces to provide outstanding low-light visibility, Get the exact combination of daylight and nightlight colors you want with a broad selection of translucent acrylic in letter heights from 6'' to 36''. Choose from polycarbonate or stainless steel backing with the brilliance of integrated LED's.
Aluminium bars, rod, tube, flat, angle, bus bars.
Aluminium profiling.
Composite panel and aluminum profiles.
Aluminum profile, aluminum extrusion.
Aluminium profiles & accessories.Export
Aluminyum, fiber.
Valves.
Hydraulic control valves.Export
Aluminum, solar panels.
Terma Specially designed a cross-flow technicallowing Terma higherhear output and homogeneous heatdistribution in the room. This technic comprises "doubleheat transfer systems" which occurs between the sections as a pre-heat area and than air flows through thelouvreswhere the air is furter heated by conduction and than returns to the room as hot air with higher speed and higher temperatures. Natural convection rate in radiiatherm terma is about %73-%75 of the total hot airgenerated by the radiator. http://www.radiatherm.com/ Optionally
Copper, aluminum, petrochemical plastic raw materials, petroleum etc.
Aluminum, aluminum radiator, heater, aluminum profile.
