2 units of tunnel kiln and transfer line
Machine type - k-550k-100 Production 5 layered10 layered Inside diameter 25 100 mm20-100 mm Cutting length1000 3000 mm1000 4000 mm Total motor power6 kw6 kw Numbeer of blades1 unit1 unit Air pressure 6 ba6 bar Width thickness 1, 5-6 mm1, 5 -5 mm Production speed25 meter/minute25 meter/minute Speed controlelectronicelectronic
Mechanical Model Panther 100 Machine Round Baler & wrapper Machine Weight 5500 kg Length 8600 mm Width 2200 mm Height 2600 mm Wheels Dimension 400/60-15.5 Number of Wheels 2 Number Axel Single Axel Vehicle connection Single point from front Bale Dimension 550*630 mm Bale weight 70-120 kg Capacity 60 Bales/h Chamber working system Gear to Gear with chain Compaction system Roller with rubbber belt Hydraulic Unit Two different hydraulic unit with cooling fan Net or Film binding system Pneumatic 700 mm wide Wrapping System Double wrapping arm with 375 mm Film roll Electrical Required Power 10kw Required Volt 380 volt (3 phase) Operating System Electronic Control System PTO Optional
Since 1969 "Tameki" brand has continued its efforts to comply with European Standards and continues its production ISO 9001: 2015 quality management system, 2014/31 and 2014/32 EU Type Approvals , CE and OIML conformity certificates. The service department of our company continues its uninterrupted service - maintenance and calibration services within the framework of 24/7 customer satisfaction principles with its large vehicle fleet, fully equipped and trained expert staff. Our R&D department, which we have developed in order to provide better service to our customers, is getting closer to its goals every day and carries out its research in line with your expectations. With the policy of "always the best product" and "best service" adopted as a principle since its establishment."Tamaeki" brand symbolizes trust and quality at home and abroad.
Since 1969 "Tameki" brand has continued its efforts to comply with European Standards and continues its production ISO 9001: 2015 quality management system, 2014/31 and 2014/32 EU Type Approvals , CE and OIML conformity certificates. The service department of our company continues its uninterrupted service - maintenance and calibration services within the framework of 24/7 customer satisfaction principles with its large vehicle fleet, fully equipped and trained expert staff. Our R&D department, which we have developed in order to provide better service to our customers, is getting closer to its goals every day and carries out its research in line with your expectations. With the policy of "always the best product" and "best service" adopted as a principle since its establishment."Tam�§eki" brand symbolizes trust and quality at home and abroad.
We are Sia mechatronic, producing Paper core, edge board making machines since 2004. We are an experienced company with a great team which have global production experience. Our main office is located in Adana/Turkey, other remote offices in Istanbul/Turkey and many sales executive on the field. We are proud to inform you about our machines. For more information please contact with us! In addition, We have the ability to manufacture all kinds of paper machines and custom-made machines. Minimum Edge 20mm Maximum Edge 150mm Maximum Pipe Wall Thickness 8mm Minimum Cut to Length (20 m/min) 400mm Maximum Cut-to-Length 6000mm Maximum Cut-to-Length Speed 80 m/min Knife Cutting System Servo-motor Maximum Number of Layers 15 Pieces
Minimum pipe diameter 8mm (ID) Maximum Pipe Diameter 600mm (OD) Maximum Pipe Wall Thickness 18mm Minimum Cut to Length 150mm Maximum Cut-to-Length 6000mm Maximum Pipe Cutting Speed 30 m/min Maximum Number of Blades 10 units Maximum Number of Layers 35 Pieces PAPER BOBIN STAND 45 degree paper roll stand. Max 5-50 layers, or customized the layers. Paper roll distance 180 mm. Paper roll center adapter. Wheeled chassis. Chassis fixing screwes. PAPER GLUE STAND Pneumatic glue pump 150 Lt/min. Electrical glue pump 150 Lt/min.(Optionally) Electrical glue heater resistance with oil.(5 KW 3 phase) Mechanic paper breake Mechanic glue scraper PRE FORMING STAND Min.diameter: 10 mm Max diameter: 600 mm Min-thickness: 0,5 mm Max-thickness: 30 mm Rewinding noses: Two noses single belt Speed of adjust and control: Inverter Power input: 3x380V SERVO CUTTING STAND 6 Blades Pipe Cutting System with Servo Cutting Motor: 0,75 Kw (6 Pieces) Full Electronic Servo Controlled Length Cutting System Servo motor controlled blade cutting movement Min: 130 mm Max: 6000 mm Cutting Length Min: 0,5 mm Max: 15 mm Cutting Thickness Min: 20 mm Max: 250 mm Inner Tube Drawing Feature Smooth Cutting + - 2 mm Production Speed Min: Max: 30 meters / minute BELT CONEYOR STAND Belt motor 0.37 kw. Belt length 3000 mm. Belt width 300 mm. Belt motor with speed control. COLOR PAINTING STAND 1-Roll motor 0.37 kw. 2-Roll length 300 mm. 3-Printing width 300 mm. 4-Roll motor with speed control.
Max Paper Width: 850mm Max Speed: 250-300 Strokes/min Control System: Servo Motor Electric Power: 5 KW Net Weight: 2100 Kg Packed dimension: 3.15*1.8*1.9(L*W*H) speed: 180-250strokes/min PLC (Mitsubishi, Japan) Transducer (Mitsubishi, Japan) Servo motor (Mitsubishi, Japan)
Model WZFQ 1600A Precision ±0.2mm Max. width of unwinding : 1600mm Max. diameter of unwinding :  1600mm (Inner core 3 6) Min. width of slitting : 50mm Max. diameter of rewinding 1000mm/ 1200mm(option) Speed 350m/min Total power 20-35kw Suitable power supply 380v/50hz Weight (approx.) 3000kg Overall dimension (L W H )(mm) 3800 2400 2200
SIZE : 2 , 4 , 8 , 12 OZ High speed 130-150 cup / min Paper thickness : 210-380gsm Top Diameter : 92mm - 65mm Cup Height : 170mm - 60mm Bottom Diameter : 65mm - 50mm Power Requirement : 380V/220V, 50Hz, 3ph --with open cam --automtaic lubraction --PLC control, Touch screen operate --Cup stacker
A.C. 400 - Automatic Edge And Corner Cutting Machine It cuts PVC and aluminum profiles serially. It has a full electropneumatic system. It has an electromechanical system. It cuts at any angle. It has a special stopper for 45 30 22.515 0 angles. Cuts both PVC and aluminum profiles Fully electro-pneumatic system Electro-mechanical system Cuts at all angles Has a special stopper for 45 30 22.5 15 0 angles Adjustable saw advance speed 400 mm diamond saw diameter Stops automatically when the top cover is opened There is a right and left conveyor system Low energy and air consumption Technicial Specifications Voltage 380 â?? 220 V Frequency 50-60 Hz Total power 1,5 Kw Air pressure 6 Bar Air Consumption 8 lt/min Dimensions (mm) 720 x 20 x 1280 Weight (Kg) 155
C.K. 401 - Automatic Glazing Bead Saw Machine It makes 45 degree cutting of PVC lath profiles and removing the nail area. It has a full electropneumatic system. The working system is automatic and the horizontal advance speed can be adjusted. It makes serial and precise cuts. Makes 45 degree cutting (without notches and faults) Full electro-pneumatic system Full automatic Adjustable horizontal advance speed Makes serial and precise cuts Multi-system (Adaptable for all profile brands and types) Metering conveyor for long materials (profiles) Low energy and air consumption Technicial Specifications Voltage 220 â?? 380 V Frequency 50-60 Hz Total power 1,5 Kw Air pressure 8 Bar Air Consumption 8 lt/min Dimensions (mm) 500 x 1000 x 1120 Weight (Kg) 135
1.Polipropilen ( PP ) 2.Polikarbonat ( PC ) 3.Polietilen ( PE ) Alak Younluklu Polietilen (AYPE) 4.Yksek Younluklu Polietilen (YYPE) 5.Polivinil Klor (PVC) 6.Polistiren (PS) 7.Akrilonitril Butadien Stiren (ABS) 8.Polislfon.
pvcpipeline , pprcpipeline , sprinklerpipeline , coiledpipeline , drippingpipeline , gardenpipehose , medicalpipeline , wickproductionline , cableproductionline , softpvc , filamentline , braidedhoseproductionline , spiralhoseproductionline , siliconehoseline , extruder , pvc , pipe , pvcpipe , plasticpipeline , line , pprc , sprinkler , coiled , dripping , garden , hose , medical , medicalhose , wickproduction , wick , cableproduction , cable , soft , filament , braidedhose , braid , spiralhose , spiral , siliconhose , spiralhoseproduction , extrudermachine
Rotor Lenght - 635mm, The Rotor Diametr - 250mm, The Rotor Speed - 80-100rpm, Drive Motor Power - 30kw Pgr/red, Ph Pgr Set, Number Of Stationary Knives, Number Of Rotary Knives, Knife Material - Din 1.2379, Screw Drive 2,2kw Cooling Coil And Shreider Elektric Components safety
Size: 1100*600*230 cm Speed range: 0-12 pcs/minute Fabric working width: min 30cm x4 bant - max 80cm x2 bant It detects towel's cutting point exactly by sensors. It is able to count the amounts It is able to produce 600 amounts per hour of towels for standard dimension which is 50*100cm Machine can stitch min 30*30cm - max 100*180 towels
Size: 340*460*290cm Fabric working width: min-25cm max-280cm Speed range: 0-80 meter/min Operator panel 5 self automatic controlled independent blades within machine
Machines for towel cutting and stitching. Machine ablo to stitch 20 meter/minutes speed means 3 stitches per cm Size: 250*435*257
ZIM A2000 machine can make concrete pipe, square culvert and other concrete materials between 800mm-2000mm diameter and 2000mm-3500mm lenght. In this machines mortar stocking and filling operations are done by mortar conveyor band with bunker. Materials which produced in this machine are transferred to drying area via crane. Our machine is making production on steel pallets. Produced material is carried to drying area with outer mould. After discharging the ready material to drying area, outer mold is movingto main machine for new production. Our Machine is working with hydraulic press and vibration systems. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. Special designed strong chassi of the machine enables long live producing without errors. Vibration table is made on high precision CNC machines.
Gravel (Stone chips) obtained by breaking in various sizes are collected from 4 pieces of dosage silos into a collector band in desired amount through the bands. The speeds of the feeding belts which are located underneath of 4 pieces dosing silos can be set from the of frequency control panel. Materials are moved into a mixer through these bands, moisturized by adding water and then obtained a homogenous and compressible mechanical material. Mixed and moistened material collected in loading silo through a band. There are 2 pieces of pneumatically controlled covers in loading silos in order to load the trucks fast.
