We are manufacturer in Istanbul, Turkey. Our products are respiratory therapy devices; CPAP, AUTOCPAP, BiLEVEL (bipap), BiLEVEL ST, VTAPÃ?(Volume Target Auto Pressure)(AVAPS), ASV (Adaptive Servo Ventilator) with respaps brand. The world health organization released a statement that bilevel, bilevel st, vtap and asv devices are used in the treatment of covid-19. If you need, we can deliver the products to you with the best prices and fast delivery option.
They are compact cooling units used in cold weather, suitable for any environment, not looking for a special team for installation, designed for open and closed environments with plug and play features. The Monoblock series combines the latest cooling technologies with traditional effective solutions. They can work in extreme weather conditions with minimum maintenance requirements. High performance provides low ecological refrigerant charge and low noise emission rate in hermetic cooling circuit. We produce monoblock machines with air-cooled standard, water-cooled and how much cooled.
Cooling capacity Ambient temperature 35¦c , 10500watt ( 9000 kcal/h ) Unit height width lenght Monoblock 190 1350 1800 Air flow (m¦/h) 2040 A/c unit 62, 2 Mounting kit 25 Refrigerant r 134a Power supply 12 vdc - 47 a 24 vdc - 33 a
Type minibus Certification CE Size 15-20 seats Place of origin tr;trprovince201009143 Brand name SAFRAN Model number symphony TS 800 Cooling capacity 9 kw - 7700 kcal/h Refrigerant R134A Compressor cylinder displacement 138 cc Condenser air flow 5700 m3/h Condenser fan pcs 2 pcs axial fan Evaporator air flow 3000 m3/h Evaporator fan pcs 3 pcs blower fan Unit size cond 1250x880x207mm evap 1160x390x160 mm Total weight 55 kg Power input voltage/current 12/24 vdc - 50/25 a.
VENCO energy recovery units (VER), are designed to have high efficiency by using rotary type heat exchangers. The efficiency of VER units is about 80% and this value is higher than the efficiency of VHR units (aluminum plate heat exchangers) at least 25%. By the way, the supply air temperature will be too close to the room temperature and it would not be necessary to use additional heater. Rotary type heat exchangers transfer the humidity as well as the heat. By the way, humidity will be transferred to the supply air from the fresh air in winter. And it is transferred to the exhaust air in the summer time. It helps to keep the humidify level close to the comfort conditions. 7 standard models, with TSEK certification and CE marked in compliance with applicable directives, Indoor air quality with synthetic filters, The design, providing fast and easy installation and maintenance, Low noise level and working on required capacity by using direct driven fan with 3 speeds, The excellent sound and heat isolation, due to fully insulated cabinet, all standard models are available in stock, Please contact us for non-standard capacities.
VENCO Heat Recovery Units (VHR SC) are designed for saving energy and also improving indoor air quality. High Efficiency plug fans are used in these units. VHR SC Units provide the facilities of air-conditioning applications (residential, commercial and industrial areas) by using the plate type heat exchangers that recover the heat. The heat is transferred from warm air to cold air by the exchangers with high conductivity, efficiency and performance. The unit could be equipped with the accessories; Duct Type Electrical Heater, Hot water Coil, Silencer, High Efficiency Filter, By-Pass Kit, Carbon dioxide or Air Quality Sensor. HS Code is 841950000000
Heat Pump Heat Recovery Ventilation Units with heat pump, designed for saving energy and also improving indoor air quality. VHR DX Units provide heat recovery and well conditioned fresh air by air to air plate type exchangers and heat pump. 30 ¦C fresh air in the summer time and 12¦C fresh air in the winter time can be obtained by usual heat recovery units, but these results are not comfortable. You can obtain 20¦C fresh air in the winter time with high efficiency heat pump. Cartoon Box and Pallet
Venco Duct Type Electrical Heaters are used to heat the fresh air or to reheat the supply air in ventilation systems. Moreover, it is used to increase the supply air temperature with heat recovery units. All electrical Heaters have TSEK and GOST-R certification and CE marked in compliance with applicable directives. Venco duct type electrical heaters are classified as VRE and VCE models. VRE models are rectangular duct type heaters and produced with the dimensions as required. VCE models are circular duct type electrical heaters and produced at a dimension of standard spiral duct diameter. All duct type electrical heaters can be connected to the duct system without any accessory. Cartoon box, pallet
Ambient temperature 35¦c 7558 watt ( 6500 kcal/h ) Dimensions (mm.)unit height width lenght Evaporator 200 350 1090 Condenser 160 800 1230 Weights (kg.)mounting kit 14 A/c unit 46, 7 Other informationsair flow (m¦/h) 1200 Refrigerant r 134a Power supply 12 vdc - 55a
Electrical and heatin are optinal. All our frigorific units are under atp certification. Ambient temperature 30¦c , k
Venco heat recovery units (vhr) are designed for saving energy and also improving indoor air quality. Vhr units provide the facilities of air-conditioning applications (residential, commercial and industrial areas) by using the plate type heat exchangers that recover the heat. The heat is transferred from warm air to cold air by the exchangers with high conductivity, efficiency and performance. The unit could be equipped with the accessories; duct type electrical heater, hot water coil, silencer, high efficiency filter, by-pass kit, carbon dioxide or air quality sensor. Cartoon box and pallet
Specialized for telecommunication sector, roof top, ducted, VRV.
Application area; especially operating theatres, pharmaceutical industry, chemical industry, food production, electronic industry and research laboratories. Sensitive applications in aforementioned application areas require a ventilation system suitable for conditions specified in standards.Gonka laminar flow extract systems reduce microorganism contaminants and particulate concentrations in air to the minimum level in accordance with the standards. Hepa filters which clean filtrated air before going into operating room. Mounting situated in ceiling of the operating theatre in such a way that it should locate over operating table. Stainless steel air distribution box, hepa filters, transparent air distributor (laminarizator) and pendant operating table lighting connection. Easy maintenance and disinfection because of transparent air distributor's being pulled down. Operating theatre lighting system made up of airproof construction. A laminar, vertical air flow from transparent air distributor through operating table prevents turbulent air flow in conventional air systems and offers a high level cleanliness class around the operating table during the operati The system which remove particulates and microbes from operation part due to laminar flow. Special design for operation theatres which require especially high level sterilization in accordance with din 1946. Differential pressure sensors. Easy connection differential pressure sensors and leakage testing. Easy installation to all kinds of ceilings. Depends model
Air handling unit (ahu) 8 different models which provide required humidity and temperature by conditioning air volume in wide ranges. Standard series Application area: business centers, schools, hospitals, factories, hotels and restaurants. 8 different models which provide required humidity and temperature by conditioning air volume in the range of 3000m¦/h and 100.000 m¦/h. The framework which is formed by combination of aluminum frames, which are connected specially, with plastic and aluminum comers. Boards which are made up of double skilled galvanized iron in a standard way. Polyurethane insulated panels, which are 30 mm in thickness, for thermal and acoustic insulation in a standard way. Standard accessories; Filter chambers; chamber design which provides easy mounting and de-mounting in filters and filters with different productivity levels on demand. Heating and cooling coils; seamless cooper tubes. In heating coils, 4 options: warm water, vapor, hot water, electrically heated; in cooling coils, 2 options: chilled water and dx (direct expansion). Dampers; rigid aluminum frame in multi airfoil structure which is the least resistant against airflow. Rubber gaskets which reduce air leakage through blades to the minimum level. Fans; statically and dynamically balanced aspirators and ventilators in double inlet belt driven centrifugal type. Forward curved fans in systems with low, medium and high duct pressures, . Optional accessories; Gonka vapor humidifier, standard vapor cylinder, immersion electrodes, stainless vapor distributor and microprocessor control unit. Mufflers which are made up of coulisses to provide required sound holding capacity. Plate heat exchanger or heat recovery wheel for recovery of the heat emitted with exhaust air. Electrical board. Frequency converter Depends on the size, model and chambers
Gonka packaged hygienic air conditioning units have been designed for meeting the special requirements of clean rooms Application area; gonka packaged hygienic air conditioning units have been designed for meeting the special requirements of modern operating theatres, clean rooms in pharmacy, agriculture, food and aeronautics industries. Highly efficient filtration of supply and extract air. Maximum function control: room temperature and relative humidity control throughout the year. Meeting fresh air that surgical operations require Quiet and non-vibrating operation that operating theatres require. An independent system which is under direct control of authorized health staff. Pressure control in aseptic and septic surgical operations. Continuous control of room temperature and humidity. Quiet and non-vibrating operation. Replacing the old installation in available places and generally, because their sizes are small, occupying less room than any time before, however available air canal and water installation could be, easy erection in any type of health institutions. Depends model
Application area; hotels, offices, business centers, restaurants, hospitals. Gonka screw compressor water cooled liquid chillers, with its models in the range of high efficiency and high capacity, are ideal for cooling operations related to comfort and industrial purposes. R22 , r134a or r407c options. Compressors; self hermetic screw compressors. Compressors changing between 1 and 4 according to cooling capacity. Condenser; highly efficient, easily used and maintained, double mirrored finned copper piped shell- tube condenser. Evaporator; shell- tube evaporator whose cooling liquid side and water side have one-circuit, multiple transitional, two mirrored construction. Cooling circuit; cooling circuit and circuit elements entirely independent for every compressor. Electrical screen and control board; board including switch and micro-processor based controller unit and control cards as well as elements such as systemic control elements and fuse, contactor, thermal magnetic switch and relay. Micro-processor based control system; full control over all the cooling circuits. Connections on board through simplified device failure follow-up and easily recognized electrical diagram. Low noise level. Multiple compressor, multiple cyclical, high efficiency. %25-%100 modulating capacity control in every compressor. Tough construction and long life. Easy handling, installation and service. Compatible with available bms systems. Meeting consumer requirements in the most suitable way through broad accessory and option alternatives. Newly improved use of screw compressor with high cop value. Rational control. Depends model
Industrial Carpet Dehumidifier Machine Diepanzer dehumidifiers have a maximum dehumidification capacity of 21 liters per day at an evacuated air flow of 260 m�³ / hour. Semi-professional construction and carpet dryer machine has a digital hygrostat and humidity control panel to facilitate use and save electricity.Diepanzer dehumidifier machines have a solid metal housing. In addition, thanks to the wheels located at the bottom, it allows it to be moved to a different place quickly and easily.There is a practical mechanism on the back of the carpet dehumidifier machine for attaching the safe power cable. Industrial Carpet Dehumidifier Machine Performance Features: Rotation compressor Hot gas defrost mode Digital hygrostat and humidity control Warning lights Easily accessible air filter, easy to clean Single stage fan Connection option for external condensate drain Portability: there are wheels under the device that can move in all directions
DUCTS ATEX CERTIFIED; It is used for mining ventilation in mining and ore areas. It is manufactured up to 200 mm 500 mm. ATEX certified for strong against fire resistance. DUCTS ANTISTATIC; It is used for mining ventilation problems in mining and similar works. It is manufactured up to 200 mm 2500 mm. High quality with antistatic properties.
Beo Mini Chiller Chillers Eco Series ; It is particularly low capacity cooling needs series products manufactured in mind. Water Cooling Group at our manufacturing producers starting at 1 Hp product manufacturing is do I lower capacity, which is also unnecessary energy consumption during use in initial investment costs and needs. Beo Mini Chiller Water Cooling Group Eco Series without compromising the quality of the water chillers as well as our other first class are manufactured with equipment. The 1/4 HP (780 kcal) The aim of our production starting from the ground, while the initial investment costs and most importantly A ++ energy efficiency with our compressors and equipment to save energy is to. Beo Mini Eco Series Chiller Chillers Our product is the ideal solution for low-capacity water cooling. BEMC14: Beom Mini Chiller Water Cooling Group Eco 1/4 Hp - 780Kcal / h 220 V AC BEMC13 Beon 1/3 Hp Mini Chiller Water Cooling Group Eco - 970Kcal / h 220 V AC BEMC38 Beon 3/8 Hp Mini Chiller Water Cooling Group Eco -1.300Kcal / h 220 V AC BEMC34 Beon 3/4 Hp Mini Chiller Water Cooling Group Eco -1.800Kcal / h 220 V AC Beon Mini Chiller Water Cooling Group Eco Series General Features Water Tank PVC ABS Digital thermostat CFC Free R134a gas Ultra quiet compressor Equipment in CE standards Electrostatic Painted rust and scratch-resistant cabinet Thanks to the portability feature Portable Ergonomic design saves space Water flow warning system Water flow control system Beon Mini Chiller Water Cooling Group Uses Eco Series Hanging the cooling jaw and the fixed spot welding machines and transformers In the seam welding machine transformer cooling jaw and The cooling of the oil hydraulic press the cooling of the wire erosion machine use water to cool the bread production acid with acid the temperature in the coating property of maintaining the desired temperature
Category: Air Cooled Water Chillers, Chiller Systems Product Code: BHS eco-CH series Capacity: 11 kW - 156 kW between 30 different models BEO Water Cooling Chiller , our systems modular transport with the advantages of being given, installation, maintenance and repair applications providing convenience. In hardware exchanger stainless plate with minimum power loss, maximum performance is obtained rapid cooling and heating . All used in the production of chromium-nickel body 304 and fasteners and copper nickel alloy condenser sea conditions with many years of durability it shows. High and low gas pressure protection, the water flow control and sensor system is placed under freezing full protection. Usage areas Beon Heat Pump Chiller Groups ; The heat pump (heating, cooling) feature is used in every field requiring hot and cold water to be conditioned. A suitable energy level ++ Ultra Quiet compressor system through eliminating noise pollution. Boutique Hotels Comfort Purposes Businesses Industrial Machinery, Equipment Cooling of the mold The need for cooling machines such as the Punto Source Plastic Injection Molding Industry Wire EDM Machines Fan coil systems It is used in many areas such as smoothly. 11kW - ?156 kW capacity range of 30 different models Beon There is Midi Eco Chiller Group Our manufacturing. Low capacity and high capacity for Your Needs
