Milling machines.
Tumbler screening machines, fine powder sieving machines, ultra-fine powder screening machines, ultrasonic tumbler sieving mahines.
Machinery.
Machine.
Reinforcing cutting machine.
Automation systems for PVC profile extrusion, scada PLC solutions, turnkey PVC automation systems.
Bag closing and bag making, big bag machines, grain dryers, grain storage systems, elevators componenent systems, full automatic packaging systems, iternational suppliers for iternational contractors and tenders, pellet dies and roll shells, recyle machines.
Hydrolytic rock drill machinery and equipment.
Cathodic protection systems.
Papier mache, jewellery.
Membrane - vacuum presses with additional air pressure, membrane vacuum presses, CNC routers, roller presses, post forming machine, edge-banding machines, trimmers.
Colum and boom welding automation systems, welding rotator automation systems, fit up module centering systems, welding positioner systems, frame welding automation systems, longitudinal welding automation, oscillation systems, chain type positioner, transport trolleys & fixtures, tank storage welding automation, robotic welding automation, plasma welding automation.Clearing agent, transportation & shipping
30kgs toner powder capacity. 3 different toner powder tank - min 10 kgs each tank capasity.Lift system for The transport of toner powder. Mixer / spiral(carrier).Heavy metal body painted with anti-electrostatic paint. Power button - start/stop / emergency buttons. Control panel - 15 process entrance. Resistance - moisture meter. Inside and outside the cabin humidity and temperature meter .Changes in internal and external moisture balance. Always keep fresh toner powder without waiting for a change in chemistry due to the toner powder does not. Refill toner powder and dust pollution during the filtration and vacuum system prevents falling with a strong vacuum effect, toner dust particulates are sucked creating a better and cleaner environment. Temperature control panel - air and room temperature stabilization. Resistance system to keep a constant temperature and inside of the machine temperature. 2.10 x 90 x 90 cm
- Due to circulational cooling system the pressing process is done faster. - There are rails and locks installed on the machine in order to put on silicon membrane and to work with natural veneer. - There is an automatic film fixation mechanism, that helps save time preparing before the pressing. Also it helps prevent defects on the pressed pieces, that may arise as a consistence of wrong replacement of the film on the worktable. - Press head lifters are designed to prevent swashes of the head of the machine. -Air dispersion system provides a proportional dispersion of the air inside the machine while pressing, so the air temperature in each corner of the machine is the same. -After recent modifications the quality of covering of wood pieces with PVC has risen. -The machine is extremely easy for use, so it can be used even by low-qualified workers. -There is one machine better than this one- it is membrane-vacuum press with additional air pressure. Vacuum 40 m3/hour The dimensions of the machine 2800 x 1600 mm x 1500 mm Total power 27,5 Kw The dimension of the worktable 1400 x 2500 mm The area of the worktable used 1200 x 2300 mm The time required for pressing process (up to material) 2-20 min. Circulational cooling system The system of automaic fixing of PVC or similar materials. Automatic vacuum system Weight 600 кg
Edge-banding machine EXPERT - 4600 Technical characteristics Voltage/frequency 380 V /50 Hz Amperage 22 A Width of edge band 0.4 - 3 mm Width of the worked wood pieces 10-50 mm Feeding speed 10-20 meters/min. Total power 12,4 Kw Pressure in the machine 6 atm Air consumption 240 lt/min Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg The sawing unit (cleans butt ends of the wood pieces before working-optional feature) 2 x 4,5 Kw 5,5 hp 60 hz Speed of sawing unit 4750-5250 dev/dk Head& End saw cutting unit 2 x 0,55Kw / 18000 Rpm Milling unit speed 2 x 0,55 Kw / 18000 Rpm Back channel opening 1,1 Kw / 2800 Rpm Polishing motor 2 x 0,18 Kw / 1400 Rpm WHY EXPERT 4600 Standard equipment All the operations taking place and all the arrangements made on the machine are shown on the electronic PLC monitor. Wide table designed for wide edge-band coils Pneumatic cutter designed to cut bands up to 3mm. Optionally the machine can be equipped by personal computer system. PLC monitor is easy to use. All the functions can be entered quickly and comfortably. Its modern style, absense of errors and easy usage make the machine a convincing equipment that meets the requirements of the customers. SCRATCHING GROUP It is a pneumatic scratching unit consisting of independent upper and lower radial scratchers.The arrangements of thin-thick pvc band from 0.4mm to 2mm are made automatically. BACK CHANNEL CUTTING UNIT t is the unit that is equipped with a jumping saw system that cuts a channel on the bottom sides of the wood pieces worked on the machine. The channel beginning and end arrangements are made on the PLC touchscreen. POLISHING GROUP It consists of two independent motors of 15000 rpm, that perform polishing work. SAFETY SYSTEMS In case when electric phases or air are not provided properly to electrical, electronic or pneumatic equipment of the machine, the safety systems start to work. Safety controls check the feeding line and the breakdown signal is given on the PLC touchscreen. Installation, technical service and personell education These procedures are performed by technical representatives of our company, the way, hotel and other costs of these services are covered by the buyer side. Working height 850 mm Width 920 mm Length 4600 mm Height 1600 mm Weight 2000 Kg
Echnical specifications A design that does not necessitate any additional appliance. A design that does not necessitate vacuum chamber owing to the dripping method filling specialty. Ink tanks are not stable on the machine. Micro processor control. Low energy consumption. 2x16 lcd screen. Electronic signaling system (buzzer). Full digital control of refilling. Full digital control of setting adjusments(the sensitivity of the needles, the timing and speed of refilling, the period of vacuuming and cleaning etc. ) Dimensions:270x300x280 mm. Weight:7 kgs Voltage:220 v-230 v Ekinox ex color 0602 has 7 motor in it. Adjustment of all motor settings is possible. Automatic servicing system. The machine shows the defective system in the machine at the opening by testing all the components. Automatic signaling system when the cartridge is filled. Sensitive needles that control ink level. Desired ink quantity can be filled with filling via clips. Every new cartridge model can be filled via additional clips and sensitive needles. All color and black sponge filled cartridges can be filled. Automatic identification of the level of ink within all sponge filled cartridges. Adjustable balance settings through vacuuming in color cartridges. Easy cleaning - even when there is color contamination in cartridges. A digital counter recording how many filling operations have been performed. For the cartridges that cannot be filled through nozzles, the sensitive needles or filling via clips unit can be used instead. Easy maintanence; defected, broken or over used motors, sensitive needles, tubes, cradle, bottles can easily be changed.
Ink-jet derlin refill&vacuum machine This derlin refills and vacuums HP 23/41/78 type of inkjet cartridge. Derlin Machines are used for the purpose of refilling & vacuuming ink through the nozzles of the cartridge Derlin Machines are not only used for refill machines but also for refilling/vacuuming by hand Derlin Machines are more durable than the plastic refill & vacuum clips, because of their mecanism and raw material
This derlin refills and vacuums lexmark 16/17 type of inkjet cartridge. Derlin machines Derlin machines are used for the purpose of refilling & vacuuming ink through the nozzles of the cartridge Derlin machines are not only used for refill machines but also for refilling/vacuuming by hand Derlin machines are more durable than the plastic refill & vacuum clips, because of their mecanism and raw material
Derlin ink-jet cartridge refill machine This derlin refills and vacuums lexmark 1970 type of inkjet cartridge. Derlin machines Derlin machines are used for the purpose of refilling & vacuuming ink through the nozzles of the cartridge Derlin machines are not only used for refill machines but also for refilling/vacuuming by hand Derlin machines are more durable than the plastic refill & vacuum clips, because of their mecanism and raw material
Crushing And Screening Plants
