KENSAN Pallet washers are generally used in the washing system to increase the sieving efficiency and to break the clay in the material. It works before the washing sieves, to the sand outlet of the washing sieve and in front of the dewatering. It is used to separate the soil, clay and other unwanted materials in the stone or sand. It can be used in both coarse and fine materials. It is produced as a double row. Spiral leaves and washing arms are arranged on the pipe in the most appropriate way. It is made in a bolted system, it is very easy and simple to disassemble and replace. Our bedding system is external and does not come into contact with water. In our drive system, the motor, reducer and belt pulley are coupled.
The materials are rubbed & dragged and the water flowed in the opposite direction inside of curved body which is made in the shape of a channel through the rotation of rubber covered shaft. The thin mud floating in the water is precipitated in the pool on the either side of this channel and the through the dirty water lost material are minimized. Screw washers are produced as single and double helical shafts are widely used machines to wash the materials between 0-10mm sizes.
KENSAN Bucket Helical Washers are machines designed for cleaning and dewatering mines and sands between 0.25 â?? 10 mm with high capacity and high quality. The fine material in the material washed in the bucket section is recycled to the system thanks to the helices and the leakage rate remains at a minimum level. High washing and cleaning capacity Ability to obtain products with low humidity Easy access to parts for maintenance and repair Adjustable speed speed Long life bearing system Low spare parts and maintenance costs
Structure Size : 90 - 200 (Contact us for different types of needs.) Rated Power : 0.55 - 30 kW Pole Number : 2 - 4 - 6 - 8 -10 - 12 - 16 Protection Class : IP55 (Contact us for higher protection classes.) Voltage : 380 V (Contact us for different voltages.) Frequency : 50 Hz (Contact us for different frequencies and speed control devices.) Build Type : B3 (Contact us for different structure types.) Mechanical Structure : Body and covers are cast iron, Legs are ductile iron. Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.) Insulation Class : F (Contact us for different insulation classes.) Working Regime : S1 (Contact us for S2..S10 operating regimes.) Ambient temperature : 40 C (Contact us for higher ambient temperatures.) Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)
Structure Size : 160 Rated Power : 1.25 - 6 kW Pole Number : 16 - 4 Protection Class : IP23 Voltage : 380 V (Contact us for different voltages.) Frequency : 50 Hz (Contact us for different frequencies and speed control devices.) Build Type : A4 - B3 - B9 Mechanical Structure : Body cast iron Cooling Type : IC 410 (Cooling by forced cooling fan) Insulation Class : F (Contact us for different insulation classes.) Working Regime : S3 - S5 Ambient temperature : 40 C (Contact us for higher ambient temperatures.) Motor Protection : On request, a thermistor can be installed and a motor protection relay can be provided.
Structure Size : 90 - 355 Rated Power : 0.55 - 400 kW Pole Number : 2 - 4 - 6 - 8 -10 - 12 - 16 Protection Class : IP55 (up to 280 types), IP65 (315 types and above) (Contact us for higher protection classes.) Voltage : 380 V (Contact us for different voltages.) Frequency : 50 Hz (Contact us for different frequencies and speed control devices.) Build Type : B3 (Contact us for different structure types.) Mechanical Structure : Body and covers are cast iron, legs are ductile iron Cooling Type : IC 411 (Contact us for different cooling types and for forced cooling.) Insulation Class : F / H (Contact us for different insulation classes.) Working Regime : S1 (Contact us for S2..S10 operating regimes.) Ambient temperature : 40 C (Contact us for higher ambient temperatures.) Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)
Structure Size : 132 to 200 Rated Moment : Up to 400 Nm Pole Number: 4 - 6 Protection Class : IP55 Rated Voltage : Up to 1000 V Frequency - Build Type : Flanged Mechanical Structure : Cast iron body and ductile iron cover Cooling Type - Insulation Class : H Working Regime : S2 Ambient temperature - Motor Protection : Thermal protection with PTC R&D support : KOSGEB / R&D and Innovation Support Program Mass production support: Ankara Development Agency / Export Focused Development Program in Advanced Technologies with TR51 / 14 / aLTEK / 0070 project number
Structure Size : 225 - 355 Rated Power : 45 - 315 kW Pole Number : 2 - 4 Protection Class : IP23 Voltage : 380 V (Contact us for different voltages.) Frequency : 50 Hz (Contact us for different frequencies and speed control devices.) Build Type : B3 (Contact us for different structure types.) Mechanical Structure : Body and covers are cast iron, legs are ductile iron Cooling Type : It is supplied by the air that the propeller at the back of the engine circulates inside the body. (Internal Cooling) Insulation Class : F / H Working Regime : S1 Ambient temperature : 40 C Motor Protection : Thermistor and Motor Protection Relay
Structure Size : 132-315 Rated Power : 2.2-160 kW Pole Number : 4 - 6 - 8 Protection Class : IP55 Voltage : 380 V Frequency : 50 Hz Build Type : B3 - B5 - B3 / B5 Mechanical Structure : Body and covers are cast iron, legs are ductile iron Cooling Type : IC 411 Insulation Class : A - E - B - F - H Working Regime : S3- 100-60-40-25% Ambient temperature : 40 C (Contact us for higher ambient temperatures.) Motor Protection : Thermistor and motor protection relay for over 250 types (Applicable to smaller types.)
Structure Size : 100 - 315 Rated Power : 3 - 370 kW / 4 - 503 HP Pole Number : 2 - 4 Protection Class : Please contact for IP23 (TS3209 EN60034-5) -IP55. Voltage : 380V (500V or contact us for different voltages.) Frequency : 50 Hz (60 Hz or contact us for different frequencies.) Build Type - Mechanical Structure : Steel Body, cast iron covers Cooling Type : Internally cooled / TEFC Insulation Class : F / H Working Regime : S1 Ambient temperature : 40 C Motor Protection : Thermistor and Phase Protection Relay
Structure Size : 80-200 Rated Power : 0.20 -15 kW Pole Number : 2 - 4 - 6 -10 Protection Class : IP55 Voltage : 380 V (Contact us for different voltages.) Frequency : 50 Hz (Contact us for different frequencies.) Build Type : Foot Mechanical Structure : Body, caps and feet ductile iron Cooling Type : IC 410 (Uncooled) Insulation Class : F (Contact us for different insulation classes.) Working Regime : S1 Ambient temperature : 40 C Motor Protection : Thermistor and motor protection relay for 132 Type and above (Applicable to smaller types.)
Washers.
Electric motors (ac three phase). general purpose industrial motors, vibration motors, vertical hollow shaft motors, slip ring motors, boat motors, brake motors, custom design motors, electric motor spare parts.
Razor alternatives for spare parts
Razor alternatives for spare parts
Razor alternatives for spare parts
Metal Clad Switchgears SETAS Metal Clad Switchgears are switching and control cubicles manufactured between 1 kV 40.5 kV comply with IEC 62271-200 standards. SMC series Metal Clad Switchgears are defined with following features according to IEC 62271-200 standards. 3mm sheet steels LSC 2B class Loss of Service Continuity Pm Partition Class AFLR Internal Arc Classification 4 earthed accessible compartments Maximum personnel safety with 31.5 kA/ 1 s internal arc test. Safety electrical and mechanical Interlocking systems. Withdrawable type Vacuum / SF6 Circuit Breaker for fast and easy servicing General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lightening Impulse withstand Voltage : 40185 kV Rated Frequency : 50/60 Hz Rated Current ( natural ventilation ) : 6303150 A Short Circuit withstand Current : 1631.5 kA ( 3 s ) Internal Arc withstand Current : 1631.5 kA ( 1 s ).
3115 1582 00 - Driver
Please see our catalog on our website.
Using as a alternative spare part for relevant machine. As Razor Spare Parts, we provide our business partners and buyers in the best way by offering many back services besides production. Our products can used easily for relevant machines and easy to operate. High guality production and with using life, Razor Spare Parts products separate other firm and companies. With the first-class productions of our target products in the spare part area, we offer services with the highest quality products as well as our competitors for atlas copco, furukawa and ingersoll rand spare parts We have services for part and the whole product. We are taking strong steps to strengthen our position in the industry and to be in the international market by offering service and solution suggestions to our customers and business partners for many products, especially atlas coppo, in hydraulic breakers and rock drilling equipment. Rotation_bushing_55025361, Rotation_bushing_55025361_TR, Rotation_bushing_55025361_sandvik, 55025361, 55025361_turkey, 55025361_TR, 55025361_best_price, 55025361_high_quality, 55025361_cheaper, 55025361_sandvik, 55025361_spare_part, 55025361_mining_machine, 55025361_drilling_machine, 55025361_razor_spare_part, 55025361_razorsparepart, drilling_blasting, sandvik_spare_parts mining_machine_spare_parts drilling_equipment hydraulic_drill_spare_parts , razor_spare_parts
