TL-10KW's parameters and quotation rotor diameter£¨m£©7speed adjustment wayelectromagnetism plus drift blade materialintensive fiberglassstop wayelectromagnetism plus manual operation blade quantity3generator typepermanent magnetism of three-phase current rated speed(m/s)12rated power10KW start up wind speed(m/s)4max power15KW work speed(m/s)4-35rated rotor speed(r/min£©220 security wind speed(m/s)45work voltageDC120V-500V start up force moment(n/m)7.5weight of main body£¨kg)1200.
Generator Rating 50KW 59 rpm 50HZ/60HZ Windward way: upwind mode & down wind mode (recommend type is downwind mode) Induction motor: 55KW 1500RPM provided by SIEMENS(CHINA) Gear box type: level helical Service factor: 2.1 Weight: 3000kgs Blades Material: Fiberglass reinforced polyester Rotor diameter: 13.8m Swept area: 150m2 Weight: 240kgs Controller: Mitsubishi PLC Schneider contactor GPRS/ADSL remote control Touch screen interface . IP65 cabin Protection Mode High speed shaft brake--failure type brake Low speed shaft brake--disk brake Yawing brake--disk brake Operational Data Start-up wind speed: 2.5m/s Rated wind speed : 12.5m/s Cut-out wind speed: 20m/s Survival wind speed: 45m/s Tower Tower type:24m free standing tower Material: Hot dip galvanized steel Weight: 4200kgs. Plywood Cases And Weave Bag.
Parameter Rated power(W) : 10000 Rated voltage(DCV) : 240 Rated current(DCA) : 42 Rotor diameter(m) : 8.0 Blade material : GFRP Rotation direction : Clockwise Start-up wind speed(m/s) : 2.5 Rated wind speed(m/s) : 10 Cut-out wind speed(m/s) : 16 Survival wind speed(m/s) : 45 Net weight(T) : 1.0 Wind turbine type : Upwind Rated Rotating speed(RPM) : 180 Blades No. : 3 Hydraulic tower height (m) : 12 Yaw mechanism : Electrical Annual yield(kwh) : 24000 Yaw mode : Auto/manual Efficiency : 0.85 Wind turbine tilt-angle : 6¡ã Protection mode : Yaw -Hydraulic brake -Dumpload. Plywood cases and weave bag.
Model S-600 Rated voltage dcv : 24 Rated current dca: 25 Rated power w : 600 Start-up wind speed m/s : 2.5 Rated wind speed m/s : 9.5 Security wind speed m/s : 45 Protection mode :Dump load Generator type : Pmg Rotor diameter m : 1.6 Blades quantity pcs : 3pcs Nacelle material : Carbon reinforced fiberglass Blades material : Carbon reinforced fiberglass Designed life time year :15 Warranty(year) : 2. Plywood cases and weave bag.
Power: 600w Rotor diameter: 2.5m Blades quantity: 3 pcs Blades material: frp (composite material) Rated speed: 400r/min Rated output power: 600w Max output power: 750w Output voltage: dc24v/ac220v Start wind speed:3m/s Rated wind speed:8m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Speed regulation: yaw& magnetic resistance Charge control: aic (automatic intelligent control) Wind turbine type: pmg (on constant magnets) Working temperature: from -40 to +60 c Annual average energy production: 1500kwh Recommended accumulators: 300ah Accumulators full charge time: about 8 hours Tower type: pull wire tubular tower or standarding alone tower(optinal) Tower height:6m (optional) weight: 40kgs (without tower) Can supply power for: color tv, lighting, electric fan and charger. Packing is by plywood box.
Power: 1KW Rotor diameter: 2.8m Blades quantity: 3 pcs Blades material: FRP (composite material) Rated speed: 360r/min Rated output power: 1000W Max output power: 1500W Output voltage: DC48V/AC220V Start wind speed:3m/s Rated wind speed:8m/s Working wind speed: 3-25m/s Security wind speed: 40m/s Speed regulation: yaw& magnetic resistance Charge control: AIC (automatic intelligent control) Windturbinetype: PMG (onconstantmagnets) Working temperature: from -40 to +60 C Annual average energy production: 2500kWh Recommended accumulators: 600Ah Accumulators full charge time: about 8 hours Tower type: pull wire tubular tower or cone tower(optinal) Tower height:6m (optional) Weight: 45kgs (without tower) Can Supply Power For: water pump, TV, Washer, Illumine, Fanner, Charge. Packing is by plywood box.
Wind/solar hybrid system power: 360W LED lamp power: 30w Wind turbine power: 300W Solar panel power: 60W System DC voltage: 24V Recommended accumulators: 200AH System working time: 8-10 hour per day, continue 3 days Charge control: wind hybrid controller. Solar Panel Parameter Solar panel combination: 60w/24v 1pcs Wp max £¨W£©: 30w Vmp(V): 17.2 Imp£¨A): 2.33 Voc(V): 21.3 Isc(A): 1.92 Size(mm): 668*545*35 Weight(KGS): 4.3. Packing is by plywood box.
LED lamp power: 112W Wind turbine power: 1KW Solar panel power: 80W System DC voltage: 24V Recommended accumulators: 600AH System working time: 8-10 hour per day, continue 3 days Charge control: wind solar hybrid controller Wind Turbine Parameter Wind turbine type:PMG (on constant magnets) Rotor diameter:2.8m Blades quantity: 3 pcs Blades material:FRP (composite material) Rated speed: 360r/min Start wind speed:3m/s Rated wind speed:8m/s Working wind speed: 3-25m/s Security wind speed : 40m/s Speed regulation: yaw& magnetic resistance Tower type and height:8 meter cone tower Weight(without tower):48kgs. Pacing is by plywood box.
Rated Power : 30KW Shaft Power : 34.5KW Rated Wind Speed : 10m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.48 Rotor Diameter : 12m Blade Length : 5.58m Tip Chord : 230mm Max Chord : 783mm Material : FRP Weight(Kg/pcs) : 112 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 248mm
Rated Power : 50KW Shaft Power : 55KW Rated Wind Speed : 10.5m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.45. Rotor Diameter : 15.2m Blade Length : 7.2m Tip Chord : 289mm Max Chord : 979mm Material : FRP Weight(Kg/pcs) : 208. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 434mm.
Rated Power : 100KW Shaft Power : 120KW Rated Wind Speed : 12m/s Cut-in Wind speed : 3m/s Cut-out Wind speed : 25m/s Max Cp : 0.43 Rotor Diameter : 19.1m Blade Length : 9.2m Tip Chord : 120mm Max Chord : 1070mm Material : FRP Weight(Kg/pcs) : 278 Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Bolt Circle Dia : 360mm.
Rated Power : 10KW Shaft Power : 11KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46 Rotor Diameter : 8m Blade Length : 3.9m Tip Chord : 250mm Max Chord : 397mm Material : FRP Weight(Kg/pcs) : 25.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Rated Power : 5KW Shaft Power : 6KW Rated Wind Speed : 10m/s Cut-in Wind speed : 2m/s Cut-out Wind speed : 25m/s Max Cp : 0.46. Rotor Diameter : 6.4m Blade Length : 3.1m Tip Chord : 255mm Max Chord : 360mm Material : FRP Weight(Kg/pcs) : 19.5. Direction : Clockwise Orientation : Upwind Configuration : Horizontal Survival Speed : 52.5m/s Standard : AWEA/IEC Design Life : 20years Root Joint : 6-M12.
Model: 3kw H4.6-3000w wind generator is adopted permanent magnetic material, cuprum alloy, and aerometal and designed with 4 technical patents. With advanced controlling system, hummer wind turbine can connect to local grid. Off- the off-grid wind turbine is matched with 25pcs batteries in series, Our wind turbines have been awarded ce, and exported to 70 countries and regions Technical parameter Rated power(w) 3000 Maximum output power(w) 4500 Charging voltage (v) dc 180v Blade quantity 3 Rotor blade material grp Rotor blade diameter(m) 4.8 Start-up wind speed (m/s) 2.5 Rated wind speed (m/s) 10 Rated rotating rate (r/min) 400 Wind energy utilizing ratio (cp) 0.4 Generator output single-phase Frequency conversion ac Rated charging current (a) 16 The maximum charging current (in a short time )(a) 28 Output ac frequency (hz) 0~360 Generator efficiency >0.8 Wireless tower diameter(mm) 397* 137*12000 (2pcs) Guy tower diameter(mm) 140*3000*4 (4pcs) Tower height(m) 12m The weight of generator(kg) 60kg Battery 12v 150ah/200ah 15pcs. Package material size (m++++ g.W(kg) Plywood container 1.05 533.2
Model: 500w H2.7-500w wind turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials. All of the wind generators are matched with wind-solar hybrid inverter controller, which can connect solar panel within 250w simultaneously. The off-grid wind turbine is matched with 2pcs 12vdc batteries in series, and on-grid system can connect to state grid. Our products are well used in: Housing Telecommunications station Tv transfer station Monitoring station (military, hydrology, observatory) Water-pumping station Techinal parameter of hummer h2.7-500w: Rated power(w) 500 Maximum output power(w) 1000 Charging voltage (v) dc24v Blade quantity 3 Blade material grp(glass fiber reinforced plastic) Blade diameter(m) 2.7 Start-up wind speed (m/s) 3 Rated wind speed(m/s) 7 Rated rotating rate(r/min) 600 Wind energy utilizing ratio(cp) 0.48 Generator output single-phase frequency conversion ac Output ac frequency(hz) 0~300 Rated charging current(a) 15 The maximum charging current (in a short time )(a) 25 Generator efficiency>0.78 Tower height(m) 6 Generator weight (kg) 6.5 Battery 12v 150ah/200ah:2pcs. N.W is 312kg, contain 3 plywood containers.
Product information Model: 2kw H-3.8-2kw small wind turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials. All of the wind generators are matched with wind-solar hybrid inverter controller, which can connect solar panel within 1000w simultaneously. Please contact us for the detail. The off-grid small wind turbine generator is matched with 10pcs 12vdc batteries in series, and on-grid system can connect to state grid. Fuse parameters of batteries and solar panels are 500v, 30a. Application Well used in: Housing Telecommunications station Tv transfer station Monitoring station (military, hydrology, observatory) Water-pumping station Technical parameter Rated power(w) 2000 Maximum output power++w++ 3200 Charging voltage (v) dc 120v Blade quantity 3 Rotor blade material grp Rotor blade diameter++m++ 3.8 Start-up wind speed (m/s) 3.0 Rated wind speed (m/s) 9.0 Rated rotating rate (r/min) 450 Wind energy utilizing ratio (cp) 0.45 Generator output single-phase Frequency conversion ac Rated charging current (a) 15 The maximum charging current (in a short time )(a) 28 Output ac frequency (hz) 0~370 Generator efficiency >0.8 Tower diameter(mm) ++118x4 Tower height(m) 10 The weight of generator(kg) 25 Battery 12v 150ah/200ah 10pcs
Product information Model: hummer wind turbine 2kw H-3.8-2kw wind turbine which features high efficiency and low rated wind speed introducing several patented technologies and some special materials. Application Well used in: Housing Telecommunications station Tv transfer station Monitoring station (military, hydrology, observatory) Water-pumping station Technical parameter Rated power(w) 2000 Maximum output power (w) 3200 Charging voltage (v) dc 120v Blade quantity 3 Rotor blade material grp Rotor blade diameter(m) 3.8 Start-up wind speed (m/s) 3.0 Rated wind speed (m/s) 9.0 Rated rotating rate (r/min) 450 Wind energy utilizing ratio (cp) 0.45 Generator output single-phase Frequency conversion ac Rated charging current (a) 15 The maximum charging current (in a short time )(a) 28 Output ac frequency (hz) 0-370 Generator efficiency >0.8 Tower diameter(mm)114*2000*5 Tower height(m) 10 The weight of generator(kg) 25 Battery 12v 150ah/200ah 10pcs Plywood container.
HMS 1 & HMS 2 (not junk scrap) Turbine, Transformers, Boiler System Many Machinery (made of steel) Copper, Copper Wire (line), Steel Pipes H-Beam, I-Beam, Angle Bars, Many Spare Parts 6 Facility Buildings, 2 Storage Steel Tanks (AAA- Construction/Demolition Company Engineer’s estimate volume).
The air vent turbine ventilator operates by utilizing the velocity energy of the wind to induce airflow by centrifugal action. The centrifugal force caused by the spinning vanes creates a region of low-pressure area, which draws air out through the air vent turbine ventilator. Air drawn out by the ATCO air vent turbine ventilator is continuously replaces by fresh air from the outside. The slightest breeze will cause the ATCO air vent turbine ventilator to spin and even after the breeze has stopped, the flywheel effect of the rotor cage will use its stored energy to continuously remove air giving rise to ventilation. Suction is maintained even at low wind velocities.
Model: ZH2KW Rated Power: 2000 Watts Maximum Power: ~ 2500 Watts Type: 3 Blade Upwind Rotor Diameter: 3.6 m (12 ft.) Start-up Wind Speed: 2.5 m/s(5.6 mph) Cut-in Wind Speed: 3m/s (6.7mph) Rated Wind Speed: 10 m/s(22mph) Cut-Out Wind Speed: None Furling Wind Speed: 18 m/s (40mph) Max. Design Wind Speed: 50 m/s (112mph) Blade Pitch Control: None, Fixed Pitch Over speed Protection: Auto Furl Gearbox: None, Direct Drive Temperature Range: -40 to +60 Deg. C (-40 to +140 Deg. F) Generator: Permanent Magnet Alternator Output Form: 48 VDC Nominal .
