Features l For flat wire staples 6-14mm, 7.6mm cable staples 10-14mm, brad nails 10-14mm and pin 14mm. l Durable all-steel construction l Heavy duty for multi-purpose use Quick jam release button Impact power adjustment Big caliber grip for comfort operation and easy squeeze Double blister Packing qty: 12pcs/inner box; 24pcs/carton N.W.: 20kgs; G.W.: 21kgs; Volume: 1.7cuft
Features Load two size of fine staples 24/6-8mm, 26/6-8mm. Light duty Easy carry Sliding card Packing qty: 10pcs/inner box; 40pcs/carton N.W.: 15kgs; G.W.: 16.5kgs; Volume: 1.34cuft
For flat wire staples 6-10mm Easy loading Simple and durable operation Ergonomically designed rubber grip Four-way grip Easy jam clearing Precision locked rear loading Double blister Packing qty: 10pcs/inner box; 20pcs/carton N.W.: 21.5kgs; G.W.: 22.5kgs; Volume: 1.7cuft
wire roller ú¦The wire roller (DL series) is the commonly used component for the wire passing, and it is used in the wire passing position of the coil winding machine and the textile machinery as well. The porcelain ring is trapped out of the bearing, it will rotate by the thread and wire passing on the surface of the ring. Thus the sliding friction has been converted to the static friction. But at the start and stop, in order to overcome the inertia, there will be a partial sliding friction. The difference between the usage of wire roller and ceramic ring is: there is a sliding friction between thread, wire and the surface of the ceramic ring, so it is applied for the smaller angle of the wire, lower pressure and other such kind of less demanding occasions. The wire roller is mainly used of static friction (part sliding friction); it is applied for the bigger angle of the wire, a certain pressure and other such kind of higher occasions. Recently, as improved processing technology, ceramic rings can also be used for important occasions, further illustration will be provided when orders. The surface polish degree of the porcelain ring reaches Ra0.2; the beating during rotation is under 0.15. We select the 99% AL2O3 as the material with the hardness of HRa88 and the density of 3.85. There are three types of the wire roller---wire roller (DL series), ceramic roller (NT-2 series) and the wire jump preventer (NT series). Two nylon sidewalls have been put to the both side of the ceramic ring and the bearing, it combines one wire roller. Two ceramic sidewalls have been put to the both side of the ceramic ring and bearing, there is a reverse hook or a ball to prevent the thread jumping out above the ring. The roller which is without the ceramic sidewalls is called ceramic roller. wire roller ú¦The wire roller (DL series) is the commonly used component for the wire passing, and it is used in the wire passing position of the coil winding machine and the textile machinery as well. The porcelain ring is trapped out of the bearing, it will rotate by the thread and wire passing on the surface of the ring. Thus the sliding friction has been converted to the static friction. But at the start and stop, in order to overcome the inertia, there will be a partial sliding friction. The difference between the usage of wire roller and ceramic ring is: there is a sliding friction between thread, wire and the surface of the ceramic ring, so it is applied for the smaller angle of the wire, lower pressure and other such kind of less demanding occasions. The wire roller is mainly used of static friction (part sliding friction); it is applied for the bigger angle of the wire, a certain pressure and other such kind of higher occasions. Recently, as improved processing technology, ceramic rings can also be used for important occasions, further illustration will be provided when orders. The surface polish degree of the porcelain ring reaches Ra0.2; the beating during rotation is under 0.15. We select the 99% AL2O3 as the material with the hardness of HRa88 and the density of 3.85. There are three types of the wire roller---wire roller (DL series), ceramic roller (NT-2 series) and the wire jump preventer (NT series). Two nylon sidewalls have been put to the both side of the ceramic ring and the bearing, it combines one wire roller. Two ceramic sidewalls have been put to the both side of the ceramic ring and bearing, there is a reverse hook or a ball to prevent the thread jumping out above the ring. The roller which is without the ceramic sidewalls is called ceramic roller.
ruby nozzle ú¦This product is assembled by the stainless steel main part and the processed stones. It has been widely used in various types of CNC automatic winding machine.The nozzle is installed at the end of the mechanical hand of the winding machine, the enameled wire will go through it and do the winding job under the guidance of its processing. It is not only the indispensable component of the winding machine, but also the key components which are used for ensure the quality of processed products. The main function of the nozzle is the protection of the enameled wire insulation layer. The ruby material has the characteristics of extremely hard and wear-resistant, we do the precision grinding and polishing by using sophisticated equipment under these characteristics, coupled with advanced technology, the roughness of bore, surface and R place will be reached over Ra0.025, therefore the rate of damage will be extremely low. We do the fine mosaic with the good toughness characteristics of the stainless steel. Advantages: good toughness, low friction coefficient of the ruby head, long life. Apply: applicable to fine coil and coil processing of thread . Processing Limit: d1 í¦ 0.2 mm D1 í¦ 0.7 mm ruby nozzle ú¦This product is assembled by the stainless steel main part and the processed stones. It has been widely used in various types of CNC automatic winding machine.The nozzle is installed at the end of the mechanical hand of the winding machine, the enameled wire will go through it and do the winding job under the guidance of its processing. It is not only the indispensable component of the winding machine, but also the key components which are used for ensure the quality of processed products. The main function of the nozzle is the protection of the enameled wire insulation layer. The ruby material has the characteristics of extremely hard and wear-resistant, we do the precision grinding and polishing by using sophisticated equipment under these characteristics, coupled with advanced technology, the roughness of bore, surface and R place will be reached over Ra0.025, therefore the rate of damage will be extremely low. We do the fine mosaic with the good toughness characteristics of the stainless steel. Advantages: good toughness, low friction coefficient of the ruby head, long life. Apply: applicable to fine coil and coil processing of thread . Processing Limit: d1 í¦ 0.2 mm D1 í¦ 0.7 mm
Tungsten carbide nozzle ú¦this product is made by the precision machining with the tungsten carbide materials (superhard alloy). The hardness reached over hra90 degree while the anti-bending degree reached over 2300n/mm. We do the precision grinding and surface treatment to achieve ra0.1 of the bore roughness and the ra0.025 of the r place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle. Advantages: high hardness, rigid and impact resistance. Tungsten carbide nozzle ú¦this product is made by the precision machining with the tungsten carbide materials (superhard alloy). The hardness reached over hra90 degree while the anti-bending degree reached over 2300n/mm. We do the precision grinding and surface treatment to achieve ra0.1 of the bore roughness and the ra0.025 of the r place of both ends. There is a scientific curvature radius design in the both entrance. This design can ensure a smooth transit of the thread. Due to the overall materials processing, and no elevation in the bore, the phenomenon of easy-bending and plugging has been improved comparing with the ruby nozzle. Advantages: high hardness, rigid and impact resistance.
Punching dies
Hss twist drills Manufacturing process:roll forged or fully ground Material: f4341, 4341, 9341, m2, m7, m35, m42, w9mo3cr4v, w4mo3cr4v Point angle: 118degree or 118/ 135 degree (split point) Finish: bright, black oxide, black & gold, polished, coffee, ti-coated Diameter: 0.2-100mm Shank: straight shank, taper shank, hex shank, reduced shank Flute: n or va (parabolic) Suitable for cast iron, carbon steel, alloy steel, stainless steel, non-ferrous metals under 32 hrc. Standard: din338, din1897, din340, din1869, din341, din345, din1870, ansi
Sds-plus shank electric hammer drill bit Dia. 4.0-30.0mm, total length: 110-1000mm Fits hammer drills with sds-plus chucking and 2-slot chucking system. It can be used with electric hammer of bosch co., aeg. Co., black & decker co., hilti co., phillips co., hitachi co., and makita co., the shank is round with dual-arc and dual-key way.
Body drills Material application chart Finish range of applications details Black oxidethin sheet metal 135¡ãsplit-point is for quick penetration and reducedwalking Popular for pop rivet drilling applications Use for drilling any thin sheet metal
Wire jump prevente The wire jump preventer (wire roller-nt series) is used for a radical change of direction and adequate guidance and prevent the wire jumping during the winding process. The precision ceramics circle inside has an ultra-fine polishing degree ra0.2. There is a high-speed bearing in this porcelain circle which can control the sliding distance between enameled wire and the circle under 0.2mm, protect the film and assure the beating of the enameled wire in a very small scope to stabilized the tension.
Chain saw alloy plate At, 10in~14in, 0.050 20pc/40pc/20pc
Chain saw alloy plate Guide apply to the stihl chain saw-sld, 36in, 0.063 10pc/20pc
Chain saw alloy plate Poh, 30in, 0.058 20/pcs, 40/pcs
Chain saw alloy plate Guide apply to the stihl chain saw 20in 0.063 20pc/40pc
Motor shaft Products: worm shafts, gears for electrical tools, gears for pneumatic tools, motor gear shafts, gears box, reduction gears, transmission gears, gears for hydraulic pumps, auto and motorcycle engine gears and gears for auto and electrical cars.
Hardware tools Standard the weight follow your requeste
Flat anchorage We are leading prestressing company and manufacturing various prestressing products 1set
Color Assessment Cabinet is draw a design,produce, inspected and tested under the same conditions. It is aimed at correcting the color deviation of goods so as to enhance the their market competitiveness. Its use is highlighted when it comes to testing the color deviation of goods at night on a rainy day. D65 --- International-standard Artificial Daylight TL84 --- Applicable to stores in Europe, Japan and China CWF (Cool White Fluorescent) F-light ---- Comparison referential light source, Applicable to family/hotel UV ---- Ultraviolet light source U30 (Warm White Fluorescent)
The three-rings and Medium-speed micro powder grinder is using the latest technological advances in grinding equipment, the three-rings and medium-speed micro powder grinder is widely used in grinding barite, limestone, kaolin, ceram, and slag, etc. Three-rings and medium-speed micro powder grinder is not different from other micro powder grinder. The three-rings and the rolling pressure ration of Medium-speed micro powder grinder is 1.2 times higher than that of the raymond grinder under the same power condition and the production output is raised to substantial degree . When a certain degree of wear of roller and ring of the Three-rings and Medium-speed micro powder is effected, The three-rings and Medium-speed micro powder is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, The stable output and fineness of the three-rings and Medium-speed micro powder are ensured. Models:HGM60;HGM80;HGM100 Model: HGM60 Diameter (mm): 600 Piece of roller : 15 Feed size (mm): í_10 Fineness of power (mm): 0.005 - 0.045 Capacity (kg/h): 350 - 2500 Total power (Kw): 37 Weight of main frame (with motor) (t): 5.2 Model: HGM80 Diameter (mm): 800 Piece of roller : 21 Feed size (mm): í_10 Fineness of power (mm): 0.005 - 0.045 Capacity (kg/h): 600 - 4000 Total power (Kw): 55 Weight of main frame (with motor) (t): 7 Model: HGM100 Diameter (mm): 1000 Piece of roller : 27 Feed size (mm): í_10 Fineness of power (mm): 0.005 - 0.045 Capacity (kg/h): 900 - 6000 Total power (Kw): 90 Weight of main frame (with motor) (t): 9.5 Notice: Any change of technical data shall not be advised additionally. Container, nude packs or in bulk
