USA Titanium Rod Suppliers and Manufacturers

Titanium Bar GR7 has excellent strength, hardness, lightweight, high-temperature resistance, low-temperature resistance, good mechanical processing performance, excellent corrosion resistance, non-magnetic and non-toxic, and good heat transfer performance. At the same time, it has memory and superconductivity. The composition of Titanium Bar GR5 is Ti-6Al-4V, which belongs to (α+β) type titanium alloy, with good comprehensive mechanical and mechanical properties. It has excellent corrosion resistance, small density, high specific strength, good toughness and weldability, and has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. The titanium round bar is mainly used in aerospace structures, engine parts, ships, medical implants and equipment, hydraulic and instrumentation pipes, cryogenic vessels, heat exchangers that require high strength. It is also used in a variety of chemical process equipment and ship and fuselage applications where corrosion resistance is required. Titanium Filler Rod is a hollow filter tube made of titanium powder by high temperature sintering. It is mainly used for titanium rod filters. It is non-toxic, non-magnetic, non-shedding, and has good bio-melting properties. Therefore, it is widely used in liquid-solid separation in food, beverage, pharmaceutical, chemical and other industries. It is especially suitable for decarbonization filtration in large infusion and injection production lines in the pharmaceutical industry. https://www.yunchtitanium.com/titanium-bar-1

Our company exports titanium pipes, plates, rods, and wires

Titanium bar/rod Grade: gr1, gr2, gr5, gr7, gr9, gr12, gr16, gr17 etc. Size: dia - 0.315” to 7.87”; Standard: astmb348, ams4928, astm f67, astm f136, h7 tolerance is available. Titanium wire / welded wire: Grade: gr1, gr2, gr5(ti-6al-4v), gr7, gr12, Wire size: dia (0.0012”-0.236”) × straight length/ spool/ coil; Grade: erti1, erti2,  erti3, erti4,  erti5, erti7,  erti9, erti12,  erti23, Welded wire size: dia (0.002”-0.4”)× straight length/ spool/ coil Standard: astm b863, aws a5.16; According to the different production process, the titanium wire can be divided into the hot drawing titanium wire and the cold titanium wire. The titanium welding wires we supply can only be round cross section and drawn from titanium wire rods, they are made as filler metal for welding applications by arc, mig, tig procedures.

Titanium bars & rods.

Titanium bars, sheets, rods.

Titanium is a very good metal material with high strength, low density, high hardness, high melting point and corrosion resistance. High purity titanium has good plasticity and is an ideal metal 3D printing material. 3d titanium wire is widely used in aerospace, aviation, military, light industry, chemical, 3D printing, welding, textile, electronics, superconducting, medical and petrochemical industries. As a kind of lightweight and corrosion-resistant structural material, titanium and titanium alloy have low density, high specific strength, good corrosion resistance, non-toxic and non-magnetic, low thermal conductivity, weldability and good biocompatibility. It has broad application prospects in aerospace, marine engineering, chemical, electric power, construction, automotive, medical, sporting goods and other fields. Titanium 6Al4V wire can be used in industrial welding wire, medical, sports goods, glasses, earrings, headwear, plating hangers, 3D printing, etc. Nickel Titanium Wire is used in super elastic memory alloy mobile phone antennas, fishing hooks, fishing rods, children's toy antennas, optical frames, Bluetooth headsets, ear hooks, medical equipment, etc.. With the development of the times, it began to be gradually used in women's clothing ring. We also have titanium tubing price. https://www.yunchtitanium.com/titanium-wire--1

Icumsa 45 sugar, nano titanium, all types of thermal coal, metallurgical coal and pet coke, all types of used industrial mfg. equipment..

* 531,780 lbs. of titanium alloy slabs. Chemistries indicate alloys 4 Aluminum -2.5 Vanadium and 3 Aluminum -2.5 Vanadium. 3 commercially pure titanium slabs with a slight amount of Niobium, - totaling 55,840 lbs. 2 commercially pure titanium slabs with a slight amount of vanadium, totaling 44,120 lbs.

Titanium exhaust tubing is characterized by its lightweight, high strength, corrosion resistance and heat resistance. The density of titanium alloy is only 60% of steel, but the strength is even better. At the same strength, the titanium exhaust tubing is lighter than stainless steel, suitable for race cars and motorcycles owners who pursue the ultimate lightweight modification. Titanium Seamless Tube is a long strip of tubing made of titanium alloy with a hollow section and no seams around it. It was originally used primarily for the manufacture of aircraft engine compressor components and structural components for rockets, missiles and high-speed aircraft. Since the mid-1960s, it has been gradually applied to electrodes in the electrolysis industry, condensers in power stations, heaters for oil refining and seawater desalination, and environmental pollution control devices. The titanium welding pipe is obtained by welding a titanium or titanium alloy coiled strip or a wide-width sheet into a tubular shape by crimping. It has been widely used in electric power, seawater desalination, water treatment equipment, air conditioning equipment and other industries, but in the petrochemical industry, the use of titanium welded pipes is still being promoted.

There is a layer of oxidized film on the surface of titanium plate GR7, which is equivalent to a good long-term wear-resistant hair separating agent. The use of titanium plate saves the separating agent, makes the plate peeling easily, and eliminates the pre-treatment process. The plate is half lighter than the copper board. The service life of titanium plate is more than 3 times that of copper plate, which can reach 10 to 20 years according to operating conditions. The titanium plate GR7 can increase production capacity and reduce the production cost of electrolytic copper, so that it has better economic benefits. Grade 5 titanium alloy also known as Ti6Al4V, Ti-6Al-4V or Ti 6-4titanium alloy, is the most commonly used alloy. It has excellent specific strength, excellent corrosion resistance and fracture toughness, as well as good weldability and ability to withstand extreme temperatures, and can be strengthened by heat treatment. The alloy was originally developed for the aerospace market and is widely used in aerospace structural components. Because of its very good biocompatibility, it is also widely recognized in the medical industry. Typical applications include aero-engine components, fuselage components, marine equipment, offshore oil and gas equipment, power generation, chemical industry, automotive moving parts, medical equipment, surgical implants, sports equipment. Titanium Sheet Grade 5 has excellent corrosion resistance, small density, high specific strength and good toughness and weldability. It has been successfully applied in aerospace, petrochemical, shipbuilding, automotive, pharmaceutical and other sectors. We also have ti6al4v eli and ti6al4v. https://www.yunchtitanium.com/titanium-sheet-1

Titanium products for the automotive, aerospace, and steel industries and other industrial industries that make products from titanium and titanium alloys. we are also a supplier of titanium powders that are used in plastic and rubber formulations, to manufacture components for all industries/oem's.We also sell advanced materials for their intellectual properties, along with their trade secrets, tied to our brands, which include raw materials to support the brands.

I am representing a company that has 20,000 tons of Titanium mined and out of the ground in Mexico. The company had mined this for a Chinese company which did not honor its contract. The company is willing to sell this product at a discount. There is additional product in the ground waiting to be extracted. The next step needs to be a call between the buyer and seller

Titanium fastener Titanium bolt titanium screw titanium nut titanium thread rod Specification of titanium fastener are as follows : Gr2 and gr5 titanium bolt, screw, nuts and thread rod from m1 to m24 Grade:gr2, ti-6al-4v (gr5), gr7 Standard: din7, din912, din933, din84, din85, din963, din7991, din912, din931, iso7380 etc. A: mini screw and bolts : m1.0 to m4 as per customer’s required length or din standard. B: usual screws, bolts and nuts: m4 to m24 or bigger C: ti thread rod: m1.0 to m24 of length 1000mm. D: u.S. Titanium can produce as per customer’s drawing and special requirements. E: titanium fasteners and parts for racing motorcycles and racing bicycles. U.S. Titanium supplies large volume fasteners to chemical industries, distributor, racing bicycles and racing motorcycle industry. Titanium bolts, screws, nuts and washers can be american , metric(m0.8-m24 or bigger), and imperial standard, also can as per drawing.

U.S. Titanium clad copper bar / tube / wire U.S. Titanium’s products of cladding copper with titanium and zirconium are as follow: 1) titanium clad copper rod 2) zirconium clad copper rod 3) titaniun clad copper wire 4) titanium(zirconium) clad copper round rod 5) titanium (zirconium) clad copper rectangle bars 6) titanium clad copper tube

U.S. Titanium casting Gr2, gr5(ti-6al-4v) etc. Astm b367 , bms 7-310, bms 7-310, asme sb367, etc. Technique: Lost-wax investment casting, lost-foam investment casting, which are capable of complicated shapes and small features, high precision and good surfaces. Equipment: wax injection machines, desiccant rooms, dewax machines, vacuum mel towers, sinter kiln and ultrasonic inspection machines etc. Size : as per clients, drawings and requirements , from 5g to 30kg. Process: wax injecting, slurrying , dewaxing , sintering, casting and furbishing.

U.S. Titanium machining part According to drawing or sample Gr2, gr5(ti-6al-4v), gr7, gr12 etc. According to drawing

Brazilian Pellet Feed / High Grade Of Titanium BRAZILIAN IRON ORE PELLET FEED Loading Port : Salvador Bahia ( East region of Brazil ) Availability : Approximately two (2) million tons of Iron Ore Pellet Feed (hematite) according the below specifications. The quantity is available for immediate shipping . Element Guaranteed Typical Fe 58.00% minimum 58.80% Fe2O3 77.00% minimum 80.90% FeO 3.60% maximum 2.60% V2O5 0.55% maximum 0.43% SiO2 4.00% maximum 3.30% Al2O3 2.00% maximum 1.85% TiO2 7.50% maximum 6.60% CaO 0.70% maximum 0.55% Na2O 2.00% maximum 1.45% K2O 0.05% maximum 0.01% MgO 2.00% maximum 1.50% Mn 0.20% maximum 0.16% Cr2O3 0.05% maximum 0.02% S 0.05% maximum 0.02% Si 1.87% maximum 1.54% Al 1.06% maximum 0.98% P 0.01% maximum 0.01% LOI 0.30% maximum 0.25% Moisture (H20) 10.00% maximum 8.00% Size < 0.15mm70% 100%

U.S. Titanium wire / welded wire Grade: gr1, gr2, gr5(ti-6al-4v), gr7, gr12, Wire size: dia (0.0012”-0.236”) × straight length/ spool/ coil; Grade: erti1, erti2,  erti3, erti4,  erti5, erti7,  erti9, erti12,  erti23, Welded wire size: dia (0.002”-0.4”)× straight length/ spool/ coil Standard: astm b863, aws a5.16;