Main technical parameters
Optional breadth: 135,190,210,230,260,280,340,360CM
Weft insertion rate: most 2280 meter per minute
Speed: design highest rev 1000RPM (The actual speed determined in accordance with fabric specifications)
most cam opening 10 pieces
Installed power: 1.5¡«3.5KW
Range of weft density: 5¡«60 thread per cm.
Main technical parameters
Optional breadth: 135,190,210,230,260,280,340,360CM
Weft insertion rate: most 2280 meter per minute
Speed: design highest rev 1200RPM (The actual speed determined in accordance with fabric specifications)
Number of heddle frame:most dobby 16 pieces.
Installed power: 1.5¡«4.5KW
Range of weft density: 5¡«100 thread per cm.
HJ851 model is a professional model of improvement and innovation, from let-off, open, coiling, transmission system to the whole machine stability have to be to optimize the overall improvement, with high-speed stability in continuous operation capability, with good performance to weaving light and medium density fabric, the products is adapt to a wide range. This model can match electronic weft storage device, cam openings devices, dobby opening device.
HJ-408 is a high density ultrafine heavy water jet loom, adapt to a wide range, especially in high density, high weight, ultrafine fabric, also with high speed, high efficiency, extremely stability operation capability. This model can match machine weft storage device, electronic weft storage device, multi-jet, cam openings devices, dobby opening device.
[Weaving Range]
This model air jet loom can weave various nature, manmade, synthetic fiber and blended spinning fiber.
[Characteristic]
1. Suitable for high speed and large reed width
Use strong box wall board on both sides, beating supper by using rocking shaft MID-supporter. Wide weaving range and also make the small noise and less vibration at high-speed operation.
Rocking shaft is fullness steel which using min-support. This motion improves rigidity of the beating. They ensure smooth and powerful beating even at high speed.
The rush start system delivers high-power torque at starting, enabling increased beating power for first pick, eliminating stop marks, and contributing to high quality production.
2. Digitalized automatic control system
Computer controlling system: There is on I-board in the machine; It can display the loom data such as the running condition, weaving technology data and trouble reasons. All These information can be copied to other looms by memory cards.
Memory card: Through digital memory card or central computer, all electrical setting caneasiliy storage or transfer duplicate to other JA10 air jet looms. Electrical setting including: Weft yarn colors, fabric structure, warp yarn tension, weft yarn density, etc. Software can be upgrading through memory card.
Fast fabric drop: Use fast interlock locking apparatus, it is easy to change cloth roller, cloth rolling diameter can reach 600mm, and fabric also can be drop while air jet loom running.
3. Weft insertion system:
Adopts main nozzle & sub nozzle & profile reed. The solenoid valves were controlled by CPU, which ensures the even air pressure during the weft insertion. When in ultra-high speed or wide reeds, the customers can choose main nozzle & auxiliary nozzle insertion style. It can accelerate the weft yarns under law air pressure, so it avoids weft yarn hurt and keeps it running stably.
Sub-gas shielded close to sub nozzle, gas supply distance is short, more suitable for high speed and also power consumption.
Using two feelers, making detection or normal weft short or weft bend, as a matter of course, but they also detect filling blow-off or long weft, and never overlook any mis-insertion, the heads are dirt resistant, ensuring a high reliability.
New weft-brake device: This device decreases the peak tension, and avoid the breaking and loosing of weft.
Vibration model pooling system: Ensure the accumulator release the weft smoothly when the loom is weaving fibrous yarn and wool yarn.
4. Widely shedding system
Completely modularized design, customers can choose various shedding device according to different requirement.? Crank shedding for plain fabrics: Max. 6 heald frames; Cam shedding device for plain, twill and satin fabrics: Max. 10 heald frames; Positive or negative electronic dobby, wide weaving range, computer controls the fabric design changing: Max. 16 heald frames.
5. Excellent anti-stop-mark system:
Main motor start mode options: The rush start system delivers high-power torque at starting, enabling increased beating power for first pick, eliminating stop marks, and contributing to high quality production.
Cloth-fell auto adjustment: Warp let-off immediately once loom stops, avoid the reed which is slowly reversing touch the cloth-fell, and debar the occasion for stop mark. When restart, it comes back to the tension set before and insert at normal cloth-fell.
Adjustment for let-off capacity: The let-off capacity can be set freely according to different stop reason and stop time, this can prevent stop marks.
One-off insertion: No need beat when restart, directly insert weft, this can prevent stop bar on heavy twill fabrics.
6. Stable cloth-fell
Adopts top-mounted temple which increases the advance acclivitous angle for weaving and guide bar which is arranged close to the cloth-fell, therefore, all the double fabrics, triplet fabric, jacquard fabrics and high-density fabrics can get stable cloth-fell.
2sets per 40¡¯GP with pallet.
6401 Textile Machinery Equipments Suppliers
Short on time? Let Textile Machinery Equipments sellers contact you.
Item Main Technical Parameter
1.Nominal reed width(cm ):190, 210.230.260.280.
2.Working reed width:reduce 0~40cm from nominal width
3.Yarn range:Cotton and man-made fiber yarn: 500tex(1.2Ne)~5tex (120Ne)/Slub & worsted:680tex(1.5Nm)~0tex(100Nm)/Filament: 10dte(9Td)~1650dte(1500Td)
4.Working speed: 380~450 rpm
5.Insertion rate:1200m/min
6.Weft Weft selector: 4~8 colors high speed electronic selector
7.Accumulator:FPD electronic accumulator
8.Weft cutter:Mechanical
9.Power:Super direct motor
10.Shedding:Electronic dobby (20 shafts max) or electronic jacquard
11.Beating:Conjugated cams with double drive on both sides
12.Insertion:Driven by conjugated cams
13.Let-off:Continuous alternative current servo electronic let-off
14.Flange dia:¦Õ 800mm. ¦Õ 1000mm
15.Take-up:Continuous alternative current servo electronic take-up
16.Cloth roller dia:¦Õ 550mm
17.Pick density:5~120 picks /cm
18.Selvage: Mechanical
19.Selvage cutter: Mechanical
20.Temple:LH & RH independent temples
21.Lubrication:Bathoil & pressure oil
22.Warp yarn stop motion: 6 line electronic contact stop motion
23.Weft yarn stop motion: electronic high-sensitive piezoelectricity inspection
24.Stop display:The panel shows the reason, function 4-color stop lights showing
25.Automatic point stop/auto pick-finding/cloth-fell/auto-compensation/auto warp tension adjustment/auto inspection/auto reposition/ auto fault showing.
26.Controlling:Functional CPU controlling system
27.Display:Big LCD screen showing bidirectional communication, button operation,instant adjustment/parameter setting programming.
Reed Width: 190cm 210cm 4sets per 40¡¯GP with pallet
Reed Width: 230cm 3sets per 40¡¯GP with pallet
Reed Width: mare than 230cm 2sets per 40¡¯GP with pallet
HST series terry rapier loom is innovative design after the assimilation and absorption of imported advanced technology from Japan HIRAIWA and other international advanced machines. There are three series and six types terry looms with various specifications, it is a guarantee for meeting all kinds all kinds of the customers' demands.
Robust frame structure, compact composition and series modularity in design, result in this machine being the first choice of customers.
Specifications
Model:RFHST30
Mian reed width:240cm,260cm
Designing speed: 370rpm
Economical speed: 300~330rpm
Weft insertion: Camd rive, left & right rapier tape transfer, handing over in the central.
Beating:Conjugated cam drive
Ground warp let-off:Tension Sensor&Servo motor drive(Ground beam diameter:800mm)
Pile warp let-off:Tension Sensor&Converter motor(Pile beam diameter:1000mm)
Shedding:Electronic dobby/Electronic Jacquard
Take-up:Electro-magnetic mechanical(Roller diameter max: 550mm)
Looping:Positive cam&double broaches(Loop length:0~20mm).
Display:10.4 inch big LCD screen/5.7 inch LCD touching screen.
Model:RFHST40
Mian reed width:240cm,260cm
Designing speed: 370rpm
Economical speed: 300~330rpm
Weft insertion: Camd rive, left & right rapier tape transfer, handing over in the central.
Beating:Conjugated cam drive
Ground warp let-off:Tension Sensor&Servo motor drive(Ground beam diameter:800mm)
Pile warp let-off:Tension Sensor + Servo motor drive(Pile beam diameter:1000mm)
Shedding:Electronic dobby/Electronic Jacquard
Take-up:Servo control system(Roller diameter max: 550mm)
Looping:Positive cam&double broaches(Loop length:0~20mm).
Display:10.4 inch big LCD screen/5.7 inch LCD touching screen.
Model:RFHST45
Mian reed width:240cm,260cm
Designing speed: 370rpm
Economical speed: 300~330rpm
Weft insertion: Camd rive, left & right rapier tape transfer, handing over in the central.
Beating:Conjugated cam drive
Ground warp let-off:Tension Sensor&Servo motor drive(Ground beam diameter:800mm)
Pile warp let-off:Tension Sensor + Servo motor drive(Pile beam diameter:1000mm)
Shedding:Electronic dobby/Electronic Jacquard
Take-up:Servo control system(Roller diameter max: 550mm)
Looping:Servo motor control(Loop length:0~20mm).
Display:10.4 inch big LCD screen/5.7 inch LCD touching screen
Reed Width: 190cm 210cm 4sets per 40¡¯HQ with pallet
Reed Width: 230cm 3sets per 40¡¯ HQ with pallet
Reed Width: mare than 230cm 2sets per 40¡¯ HQ with pallet.
Product Description
RFTL60 terry rapier loom adopts electronic let-off and take-up, servomotor-looping system, has advanced electronic controlling capability, loop formation can be changed freely from 3~7 picks, and weft density can be changed automatically while the loom is running.
This model loom not only can weave common terry fabric, but also can weave up and down loop, high and low loop, wave-pile patterns, single cover loop and other top grade terry towel. Direct motor is an option for this model looms with the advantages of convenient maintenance and saving power. This type loom fills the blank of top grade terry loom in China, and reaches the international advanced level.
High speed, perfect performance. Dynamic loop formation controlled by sley movement can ensure weaving super quality terry towels, and form the superstandard of loop pattern.
Specification:
1.Reed width: 200, 220, 240, 260, 290, 360cm Width reduction: up to 80 cm.
2.Spun yarns: 500tex (1.2Ne)~5tex (120Ne)
3.Filament yarns: 10dte(9td )~1650dte(1500Td)
4. Pratical speed: 350~450rpm
5.Weft insertion rates: up to 1350m/min
6.Colour selection: 8-colour electronic weft selector.
7.Weft feeder: FDP electronic accumulator
8.Driving control: rated three-phase 7.5kw motor, Electro-magnetic brake-cloth unit./Direct drive: fast reactive permanent super motor with low power consumption
9.Shedding motion: High-speed electronic dobby with max. 20 shafts.
Reed Width: 190cm 210cm 4sets per 40¡¯GP with pallet
Reed Width: 230cm 3sets per 40¡¯GP with pallet
Reed Width: mare than 230cm 2sets per 40¡¯GP with pallet.
GA731 rapier loom can weave all kinds of nature fiber, rayon and synthetic filament. It is the most suitable to weave all kinds of fabrics involved the fields of furnishings, upholster, tour, civil engineering, industry, such as wool fabric, linen, silk, cotton, chemical fiber, sunscreen fabric, jute, glass fiber, flat yarn, jacquard, leno weaving, etc.
Main Technical Parameters
>>Reed width: 150, 190, 210, 230, 260, 280, 320, 360, 380, 460(cm)
>>Speed: 150cm: 320~430 RPM
190cm: 312~430 RPM
280cm: 232~320 RPM
320cm: 224~300 RPM
380cm: 195~280 RPM
>>Insertion rate: 1000m/minute ~ 1200m/minute
>>Weft density: Mechanical take up: 3~68 picks/cm
>>Electronic take up: 3~120 picks/cm
>>Shedding device: Mechanical Dobby/ Electronic Dobby (20 shafts Max)
>>Electronic Jacquard
>>Let-off: Mechanical /Electronic
>>Take-up: Mechanical /Electronic
>>Beating: Conjugated cams with double drive on both sides
>>Weft insertion: Slay driven by conjugated cam
>>Weft beam: Single / Double
>>Flange diameter: 800mm /1000mm (selectable
>>Cloth roller: Diameter 550mm
>>Power: Total consume< 4.6kw
>>Control: CPU controlling system
>>Weft selection: Electronic weft selector
>>Function: Pick auto-finding, mark prevention.
Reed Width: 190cm 210cm 4sets per 40GP with pallet
Reed Width: 230cm 3sets per 40¡¯GP with pallet
Reed Width: mare than 230cm 2sets per 40¡¯GP with pallet.
Batching machine ( with direct centre drive system ) :
Features:
1) . Direct Centre Drive System & Surface Contact Peripheral Drive Roller with Pneumatically Controlled Arm
" A" frame fabric is unwound from non-contact centre drive system and wound by peripheral drive roller with pneumatically controlled arm, especially ideal for checking delicate or heavy duty fabrics.
2) . Fabric Input, Output Synchronized- for Tensionless Roll Up
Speed is controlled by an adjustable light accumulation rollers for automatic fabric synchronisation.
3) . Full Width Fabric Inspection - with 60 Degree Fixed Angle Inspection Screen
Fabric can be checked under the aid of different viewing and lighting options.
4) . Accurate Fabric Length Measuring
Fabric roll length can be taken by industrial standard measuring systems with digital readouts to give consistent fabric roll assessments.
5) . Stable Running & Easy Operation
The whole machine is controlled by PLC and the machine can be easily operated with optional Touch Screen.
6) . Simple Fabric Control
With Bow/ Banana Roller to eliminate fabric creasing and roll distortions.
7) . Stretch Fabric Control - with Scroll Roller System and Optional De-curling System
Fabric control at all times to generate consistent roll width and edge output.
8) . Versatile Fabric Input and Output Options - Synchronize with Other Production Operations
Optional systems are available for different fabric input and output presentations, continuous fabric input and plait input or output.
9) . Data Collection and Analysis System ( 4-point System) - Optional
100% fabric inspection with software for accurate fabric roll analysis and printout.
10) . Sampling - Optional
Fabric sample can be taken by automatic linear cutter and the rest fabric can be stitched by automatic sewing machine for on going checking.
Brand:
JINGYI--JY as one of the leading weaving machine manufacturers in the world, we have a long history specialized in designing and manufacturing needle looms and crochet machines.Our Textile Machinery includes Ribbon loom,Hook weaving machine,Computer Jacquard needle loom,Whole yarn machine,Lace machine,Rope machine,Ironing machine,Packaging machine and we also sale spare parts for needle loom,such as MULLER/KY/NFJ ect.
Function:
Optimally and flexibly used in the weaving of various kinds of zipper tapes.
Feature:
1. Machine in various widths are designed
2. High speed/endurable/low depreciation/better performance/high yield
3. Automatic lubrication device and automatic tension feeding system provide effective control over high quality fabric, saving time and labor for the user
4. Convertible machine parts supported with various devices to provide wider range of fabrics
5. Reliable and efficient after-sales service
6. Whole-plant equipment export and technology transfer.
Technical Parameter:
Model:10/2712/16
Weaving Head:1012
Width of Weaving Head: 2716
Roller: Single Roller
Number of Frame:16
Weft Density: 3.5 ~ 36.7/cm ( 8.9 ~ 93/inch )
Pattern Chain Cycle Cam
Motor: 2HP.
Brand:
JINGYI--JY as one of the leading weaving machine manufacturers in the world, we have a long history specialized in designing and manufacturing needle looms and crochet machines.Our Textile Machinery includes Ribbon loom,Hook weaving machine,Computer Jacquard needle loom,Whole yarn machine,Lace machine,Rope machine,Ironing machine,Packaging machine and we also sale spare parts for needle loom,such as MULLER/KY/NFJ ect.
Function:
Optimally and flexibly used in the weaving of various kinds of elastic and non-elastic tapes and etc.
Feature:
1. Machine in various widths are designed
2. High speed/endurable/low depreciation/better performance/high yield
3. Automatic lubrication device and automatic tension feeding system provide effective control over high quality fabric, saving time and labor for the user
4. Convertible machine parts supported with various devices to provide wider range of fabrics
5. Reliable and efficient after-sales service
6. Whole-plant equipment export and technology transfer
Technical Parameter:
Model:10/25 8/30 8/35 6/45 6/55 4/65 4/80 4/55 2/80 2/110 2/130 2/160 2/210
Roller:Single or Double Roller
Frames:16 or 14
Weft Density 3.5 ~ 36.7 / cm ( 8.9 ~ 93 / inch )
Pattern Chain Cycle: 1 : 8 1 : 48
Motor:2HP
Standard export wooden case.Or according to the different requirements of customers deal with packaging details.
Brand:
JINGYI--JY as one of the leading weaving machine manufacturers in the world, we have a long history specialized in designing and manufacturing needle looms and crochet machines.Our Textile Machinery includes Ribbon loom,Hook weaving machine,Computer Jacquard needle loom,Whole yarn machine,Lace machine,Rope machine,Ironing machine,Packaging machine and we also sale spare parts for needle loom,such as MULLER/KY/NFJ ect.
Function:
Optimally and flexibly used in the weaving of various kinds of elastic and non-elastic tapes and etc.
Durable, high speed, mute, easy operation, convenient maintenance and etc.
Feature:
1. Machine in various widths are designed
2. High speed/endurable/low depreciation/better performance/high yield
3. Automatic lubrication device and automatic tension feeding system provide effective control over high quality fabric, saving time and labor for the user
4. Convertible machine parts supported with various devices to provide wider range of fabrics
5. Reliable and efficient after-sales service
6. Whole-plant equipment export and technology transfer
Technical Data:
Working Width:30inch(762mm)
Number of Needle Per Inch:14/15/20 per inch
Number of Weft Bar:3 Bars
Motor:1.5HP
Double Rubber Feeding Device
Special Device
Creel: 260 Spindle Position,2
Creel: 260 Spindle Position +4Beam Creels
Swing Frame
Item Packing Meas.(CM) :Machine 178,105,176
Creel 250,40,45.
Brand:
JINGYI--JY as one of the leading weaving machine manufacturers in the world, we have a long history specialized in designing and manufacturing needle looms and crochet machines.Our Textile Machinery includes Ribbon loom,Hook weaving machine,Computer Jacquard needle loom,Whole yarn machine,Lace machine,Rope machine,Ironing machine,Packaging machine and we also sale spare parts for needle loom,such as MULLER/KY/NFJ ect.
Product name: Electric Jacquard Needle Looms/Computer Jacquard Needle Loom
Function:
Optimally and flexibly used in the weaving of various kinds of elastic and non-elastic jacquard tapes and etc. Equipped with take- off roller made of rubber or metal on require.
Feature:
1. Machine in various widths are designed
2. High speed/endurable/low depreciation/better performance/high yield
3. Automatic lubrication device and automatic tension feeding system provide effective control over high quality fabric, saving time and labor for the user
4. Convertible machine parts supported with various devices to provide wider range of fabrics
5. Reliable and efficient after-sales service
6. Whole-plant equipment export and technology transfer
Brand:
JINGYI--JY as one of the leading weaving machine manufacturers in the world, we have a long history specialized in designing and manufacturing needle looms and crochet machines.Our Textile Machinery includes Ribbon loom,Hook weaving machine,Computer Jacquard needle loom,Whole yarn machine,Lace machine,Rope machine,Ironing machine,Packaging machine and we also sale spare parts for needle loom,such as MULLER/KY/NFJ ect.
Function:
Optimally and flexibly used in the warping of various kinds of nylon, Faber, cotton yarn and etc.
Feature:
1. High speed/endurabl/simple operation/better performance/high yield
2. Automatic lubrication device and automatic tension feeding system provide effective control over high quality fabric, saving time and labor for the user
3. Convertible machine parts supported with various devices to provide wider range of fabrics
4. Reliable and efficient after-sales service
5. Whole-plant equipment export and technology transfer.
Technical Parameter:
Diameter of the application beam is below 400mm, diameter of inside hole is 17mm or 20mm, inside length is 300mm.
Speed Adjustment:Frequency control 0 ~350r/min.(Line Speed0~390m/min)
Set Length :Use the counter to set any warp length according to the requirement, this measure can reduce the loss of warp.
Width and Density adjustment:Adopt 4 pieces of W-reed; adjust width and the left and right device randomly.
Motor:2HP/4P/380V3Phase.
Speed of tying : Depending on the condition of warps minimum 60 knots to maximum 600 knots per minute.
Range : 30 Din. 4000 Din. 110’s to 4 x 6’s counts cotton.
Connection of Mains : Lightening plug 220 V. 15 Amp.
Voltage : 24.V Dc (Operator safe)
Drive : Timing PullyBell Drive (Free service)
Movement Advanced: As per counts of density of wraps, it is adjustable with a push on one lever only. Thus, it can be knotted easily with the finest warps with high density.
Type of Yarn : Spun, Cotton, Nylon, Filament, Silk, Twist Yarns, Worsted and mixed yarns also blends.
Mechanical features and functions£º
1. Take the needle component manufacturing process in Japan, with high stability, wear resistance
2. No drum full computer control
3. Delta Air movement and control of electronic yarn Road
4. Stepper motor control density and textile yarn tension
5. Double pick, double lift Zhenda with, can be woven with Y
6. Automatic alarm system, showing needle, break, and electronic fault latch
7. Super multi-color design, up to two background 5 Jacquard (16 colors)
8. UPS uninterruptible power system protection with memory, instant memory power can be maintained weaving programs and actions, calls to finish weaving
9. Weaving through the keyboard, LCD display setting completed
10. Needle oil mist evenly and reduce fabric oil.
Packed with wooden cases, gross weight: 350kgs, net weight: 300kgs.
1. This model is suitable for different kinds of textile, non-woven material, industrial materials precise cutting. If equipped with the auto-feeder, it can ensure continuous and automatic cutting process with batch of production.
2. With upper and nether exhaust system, it ensure the cutting process clean without pollution.
Technical Parameter
Laser type : CO2 laser generator
Laser power : 40W, 70W, 100W, 150W Optional
Cutting area : 1600mm*3000mm each head working area 2500mm*10000mm,The four heads can cut simultaneously
Cutting table : Vacuum absorb conveyor working table
Cutting (No-load) speed : 0-36000mm/min
Repeating location : 0.2mm
Cooling system : Professional constant temperature water chiller for laser cutting machine
Moving system : Servo system, safety alarm system, embed offline control system
Laser power adjustment : Following laser power adjustment
Power supply : AC220V, 5%/50Hz
Format support : AI, BMP, PLT, DXF, DST etc,can meet demand for most of garment CAD design output in time
Standard collocation : Up exhaust filtration system, assisted air-compressor
Select collocation : Outside exhaust pipe, auto feeder system CCD Camera Mark device
*Cutting area and laser cutting power can be customized according to requirement.*.
Working range Polyster yarn
Reed width (cm) Nominal:150, 170, 190 , 210, 230 260, 280 330 360
Useful reeding width:reduct 0-60cm
Filling selection 1 color 2 color at will
Weft density rang 6-60pick/cm
Motor 3.5kw, 4.6kw selected according to the certain model
Shedding Plain type 2-8pcs heald frame
Positive cam machine, 4-10pcs heald frame
Dobby(mechanical), upper negative dobby or electronic dobby, 2-16 heald frame (according to customer¡¯s demands)
Let-off Electronic let off-elo
Mechanical let-off
Flange diameter:800mm
Take-up Mechanical take-up
Electronic take-up
Upper and down temple(according to the varity of fabric)
Waste filling removel Mechanical take-up 3 roller
Cutter Mechanical cutter
Operation Start ¨c driven by rush start motor.Stop by electromagnetic brake at prgrammed position
Arrange, run, forward inching, reverse inching, programmed position stop after
One cycle reverse rotation.
Beating Crank beating, sword beating system oil bath lubrication system.
Filling insertion : Single pump (plunger type spring pressure system)
Double nozzle (needle type ceramic ) stbilizer system
Feeler ¨c ir feeler or opf feeler, using optical cable.
Yarn package stand Floor mounted horizontal stand for ¨c 4 package.(2 colour )
Catch cord Spindle twisting system.
Temple Top mounted, 2 barrel type with 2 ring each.
Water suction Slit tube suction (blower type ).
This series machine are new and improved models,desighed to increase overall machine architecture to expand the beams supporting area,machine stabilty.
Models can be matching pairs of single pump spray dual punp,dual jet ,double pump ,three jet ,e-free jet weft selection ,cam shedding ,dobby shedding .
2.
water jet loom Main technical parameters
Oprional rate:Maximum 2280m/minute
Number of heald frame piece:
a)Plain loom up to 8
b)cam openings loom 2,4,6,8,10 film
c)a maximum of 16 Dobby Loom
Installed power:3.5kw,4.6kw
Weft density range:6-60pick/cm
Speed:the designed maximum speed 1200rpm/min(actual speed according to the fabric sizing)
For yarn type:
(1)nylon filament(2)nylon with wire-free pulp(3)multi-resin raw silk(4)Multiple lipid retractable wire(5)Multiple lipid rayon(6)multi-resin hard twist yarn(7)Multiple lipid extension wire (8)Multiple lipid-free pulp with silk(9)elastic fiber yarn (10)lmitation silk cotton.
Export standard packing.
6401 Textile Machinery Equipments Suppliers
Short on time? Let Textile Machinery Equipments sellers contact you.
