The bale plucker is the initial stage for opening raw material in blow room, used for plucking bales of various grades of cotton and or man made fibre. Cotton bales placed in the round circle, the carriage rotates above the bales with a high revoluting beater and grid section in the carriage, the carriage plucks the bales. For every circle of the carriage will lower its position according to pre-set the distance. Such keeps the plucking continously and upto the lowest position. The plucked materials will sucked by the air ventilator in the next machne of the line with through put upto 800 kgs/hr.
Ring size 5195mmdia and height as 4200mm weight apprx 1650kgs and a loading capacity of 2500kgs diametre of rails5195* height 4200mm.
Aeromech clearer rollar cleaner cleans thoroughly the fluf from the rolars and collects in the chamber provided by a unique suction device. The fluff coolected can be easily removed from the chamber. The clearer rollar comes out on the other side completely leaned automatically.The guide is adjustable to fit on different diametre of clearer rollar of different makes of spinning machines. Saves 85% of cleaning time and labour. Low power consumption with high efficiency. Transportability to any where with affixed trolly wheels. Aeromech clearer rollar cleaner is made out of quality materials and sturdy design to with stand long and trouble-free working.
800*550*825mm and an apprx weight 200 kgs l 700*w 450* h 725 mm.
Aeromechanic BALE OPENER working width 1200mm is the latest in the series and is most flexible for every type of raw material and application, Large mixing chamber ensures thorough mixing of individual tufts, Evener rollar incorporating lifting lattice performs tufts opening and blending, Feed conveyor virtually unrestricted length of 2.5mtr to 10.0 mtrs for maximum pre mixing of bale materials and easily for contamination. It offers agentle procesing and a uniform degree of Opening, Blending and Cleaning with a high technological progress and cost effective through put upto 800kgs/hr.
6200*1700*2700 as standard Lot Size an Weight apprx 7200kgs and L 6100*W 1600*H 2600MM
Features:
1. HATACHI circuit board
2. 80%parts import and assemble
3. Test report PC print
4. High accuracy and digitized level adjusting 99 steps
5. Segments led monitor identifies the exact position
6. Touch panel and 7.4"color LCD
7. Detection ability:0.8-2.5mm .
6399 Textile Machinery Equipments Suppliers
Short on time? Let Textile Machinery Equipments sellers contact you.
Achieves better tegwa and higher whiteness
Good absorption properties with softer feel
Better and consistent dyeing and printing results
Lower dosage level give lower bod, cod value in processed water
Achieves desired tegwa with excellent absorption
Better whiteness and softer feel
Chemistry for economics
Lower dosage
Replace mercerization aid / wetting agent, by 1-2 gpl ran-sc-1095 (dc)
Physical properties
Product/appearance/stability/phdosage/pack size:
Non-ionic, bio-degradable, eco-friendly/light
Yellowish/viscous liquid stable over wide
Range of/ph 6-7/6-10 gpl for cotton,
3 û 6 gpl for spun fabric (pet/co blends)/
65 kg
Note: dosage given on weight of fabric
Preparation of ran-sc-1095 (dc) dilution
Shake the carboy of ran-sc-1095 (dc) before use for uniform product mix.
Weigh the required quantity of ran-sc-1095 (dc).
Add hot water (55 û 60¦c) in 1:4 (25% soln.) or 1:10 (10% soln.) proportion under
Stirring continuously to make a uniform dilution without any particulate matter.
Note: this is a new development, please consult us before use. After studying existing recipe, we can suggest recipe and procedure for optimum performance as per your requirement.
sgd-980 model is a high speed fancy yarn crocket machine. The machine first knits cloth with warp and weft yarn, then cuts the warp yarn to form the final yarn. Otherwise it knits warp and weft yarn to straightly kit belt yarn. Sgd-980 machine is suitable to knit various kind of yarns, both natural fibers(wool, silk, cotton, linen, etc.) and synthetic fibers (polyester, acrylic etc.) this entire material can be dyed before or after knitting, in accordance with its mattress. The finished yarn is of flat shape.
sgd-980 model is a high speed fancy yarn crocket machine controls the device by changing inlay methods to produce all king of various pattern yarns. The machine speed is controlled by a frequency converter, starting at slow speed with stepless changes, fast breaking to low speed according to meet the test production demand. The machine is divided into three main sections.
Main technology parameters
operational breadth: 762mm(30 inch)
gauge needles per inch: 15, 18, 20(according to customer need)
weft bar: 2-6 bars
stitch density: 5-20s/cm
link chain: 12-50 sections
main shaft speed: max. 1500r/min
the girth of rack frame: 170cm
whole machine power: 1.5kw
no. Of yarn bobbin: 260 pieces
seat distance of yarn bobbin: 200mm
main machine(l x w x h): 1750 x 1950 x 1750mm
winding section(l x w x h): 3000 x 2800 x 2400mm
yarn frame(l x w x h): 4200 x 1880 x 2750mm
Sgd2180 type multifunctional numerical controlled compound twisting machine is the new generation twisting machine which researched and produced by our company. It is suitable for twisting two or three single yarns and doubling and then making after twist to produce into ply yarn which is needed. Lt is widely used for computer embroidery, ready-made clothes, shoes and cases, fishing net, knitting and other industries.
Main technology parameters
spindle numbers: up:360, down:180
spindle speed : 6000r/min
spindle distance: 180mm
winding capacity: 750g
twist directions: sz or zs
doubling yarns number: 2 or 3 roots
size: 180spindles, l18930 x w940 x h2200mm
weight : about 3000kg
SGD-260 Band crochet machine can manufacture laces, elastic and non-elastic bands, medical bandages and fancy lace. The product range can be used in clothes, shoe lace, and medicine.
Gauges come into 15, 18 and 20 or according to customer's request.Automatic lubrication for link chain system allows the machine to run quietly and smoothly at high speed.
Main technology parameters
Technical data:
Operation breadth: 762mm(30inch)
Gauge: 15, 18, 20
Weft bars: 2--6 bars
Standard equipment:
Control device: 1 set
Operating motor(1.5hp): 1 unit
Rubber feeder system: 2 set
Width-wise device(260mm): 1 set
Standard accessories:
Bearded needle(g2): 400pcs
Weft guide tubes: 100pcs
Tube for width bandage: 10pcs
Block needle: 5pcs
Dropper: 400pcs
Tool: 1set/3set
Creel for 260 bobbins(max.#20cm): 1 set
Beam holder: 1 set
Dimensions and weights:
Net weight of machine: 750kg
Net weight of creel: 235kg
Crate of machine: 2800 x 1240 x 1900 mm
SGD-940 Lace crochet machine is designed for kinds of laces, it can produce curtain lace,Upholstery braid, special laces and etc.
The lace crochet machine adopt two groups of cam gear, it make the machine can produce various kinds of laces.
SGD-940 Lace crochet machine adopt frequency inverter to adjust the speed, so it can control the machine speed more conveniently. and the machine equipped self-lubrication device.
Main technology parameters
Operational breadth: 762mm (30 inches)
Gauge needles per inch: 10
Weft bar: 8 bars
Special pattern bar: 3 bars
Creel: with 260 bobbin seats
Main shaft speed: 246r/min
Motor speed: 960 r/min
Motor power: 1.5kw
Inverter: 1 unit
Auto stop motion device: 1 set
Weft feeder system: 2 sets
Machine size: 2000 x 800 x 2150 mm
Creel size: 2080 x 2800 x 1150 mm
SGD-980 Fancy yarn crochet machine is a high Speed fancy Yarn crocket Machine. The machine first knits cloth with warp and weft yarn, then cuts the warp yarn to form the final yarn. Otherwise it knits warp and weft yarn to straightly kit belt yarn. SGD-980 machine is suitable to knit various kind of yarns,like feather yarns, centipede yarns, both natural fibers(wool, silk, cotton, linen, etc.) and synthetic fibers (polyester, acrylic etc.) This entire material can be dyed before or after knitting, in accordance with its mattress. The finished yarn is of flat shape.
SGD-980 Fancy yarn crochet machine is a high Speed fancy Yarn crocket Machine controls the device by changing inlay methods to produce all king of various pattern yarns. The machine speed is controlled by a frequency converter, starting at slow speed with stepless changes, fast breaking to low speed according to meet the test production demand. The machine is divided into three main sections.
Main technology parameters
Operational breadth: 762mm(30 inch)
Gauge needles per inch: 15, 18, 20(according to customer need)
Weft bars: 2-6 bars
Weft density: 5-20s/cm
Link chain: 12-50 sections
Main shaft speed: max. 1500r/min
The girth of rack frame: 170cm
Whole machine power: 1.5kw
No. Of yarn bobbin: 260 pieces
Seat distance of yarn bobbin: 200mm
Main machine(l x w x h): 1750 x 1950 x 1750mm
Winding section(l x w x h): 3000 x 2800 x 2400mm
Creel size(l x w x h): 2100 x 1880 x 2750mm
This machine is designed for cutting tubular and flat fabric.
If you intend to get up to maximize your fabric cutting capacity with one operator, this is the right machine for your request.
Once you set the desired cut length the operation runs automatically till it reaches the programmed quantity. This machine can be optionally designed for cutting holes for spout.
The stacking is done manually. An automatic stacking unit is available optionally.
If you will be cutting circular fabric there will be an optional cam system, which prevents the mouth of the fabric from welding at the process of cutting.
Main technical parameters:
Model jc4/16
Heads4
Number of spindle16
Max. R.P.M horn gear360
Motor power0.75
Input voltage380v
Machine size(mm)(l*w*h)1.2*1.3*1.45
Bobbin size(mm)(d*h)48*140
Jc-980 elastic ribbon machine is improved and designed for the production of various types of ribbons and specially designed multi-functional machine for belt, which is on the basis of absorbing taiwan's chi-chang 980 ribbon machine. Can be woven cord, with sweaters and shirts with lace, such as knitwear. Can set 6 or 8 lines of the weft board, and is broader in the pattern of changes .In the mechanical design optimized to achieve rapid, quiet, easy operation, and other functions. Combined spending by board, 15g, 18g chains are current, linkers do not have to spend all mill. It can change various moulds according to the buyers demands. Lubrication device used on automatic lubrication, easy maintain, no artificial lubrication, reduce labor intensity and improve operational status of machinery, reduce wear and tear, make the machine much quieter and balance.
This is a multi purpose machine called as 5 in 1 machine and you can print so called as transfer printing on various products as mentioned above. We also have special package prices ( costing less ). We also supply badge and id card printing machines which are also very usefull in corporate orders.
Cleaning out impurities and loosening fibers , pressing into pieces by centrifugal force generated by high speed rotation of thorn roller.This machine can remove the dust.It¡¯s used to process every kind of cloth piece, recycle cotton and waste material.
This cleaning machine is designed by the advantages of worldwide famours machines and advanced experiences.It has been proved that it has good quality, high output and low consumption.And this machine¡¯s structure is compact and easy to control.Also it has advantages that good quality to clean our impurities and safety produce as so on.
2.Main technical parameters:
1)output: 100 -120kg /h
2)diameter of thorn roller:Ø 250 mm
3) the speed of rotating of thorn roller: the first 1900round/min
The second, the third and the fouth 2000round/min
4)dust basket: diameter: 500mm , mesh: Ø2
5) motor:the first y 132m£4£¬7.5kw one set
The second, the third, the fouth y132s£4£¬5.5kw three sets
6)thorn bar size: 1.09¡Á75¡ã¡Á7 tooth/ 25.4mm
7)axletree: thorn roller 1308k 8pcs
Dust basket 6205-2rs 8pcs 6206-2rs 8pcs
Interpose chain wheel 6005-2rs 4pcs
Tighten chain wheel 6205-2rs 2pcs
8)the size of host machine(lenth*width*height): 6150¡Á1720¡Á 1160 mm
9) the weight of whole machine:¡Ö 2000kg
