KUKI With ultrasonic frequency 20K,machine can according different style making welding mouth,Up and down lift motor control,Operation more easy With half automatic working .special steel amplifier,solid and durable.
This textile waste recycling machine uses high speed centrifugal force when operating to get rid of impurities in cotton and loosen the cotton at the same time. This machine is mainly used to process all kinds of lint cotton, cloth clips, cloth corner, waste yarn, etc. 1. Overall dimensions: 4420mm*1500mm*1150mm 2. Output: 100-120kg/h 3. Capacity of removing impurities: 6%-10% 4. Cylinder diameter: 400mm 5. Cylinder rotation speed: 1st roller:1420rpm/min 2nd roller and 3rd roller: 1800rpm/min 6. Chain: t=19.5mm 7. Motor power: 11kw+7.5kw+5.5kw
This textile waste machine is mainly used to process all kinds of waste cotton, clips, leftover, waste yarn, thread, flock and flax. This machine is SBT630 opening machine combined with model 1390 cotton recycling machine, which makes better fiber. Overall dimensions: 12000mm*2300mm*1600mm Weight: 14 tons Output: 200-300kg/h Motor power: 30kw+22kw for opening machine 15kw+11kw+7.5kw+7.5kw+7.5kw+7.5kw
Vertical and automatic hydraulic baling machine for raw cotton This baling machine is designed as per our customers' requirements, having the features of high automation, labor cost and time saving. It is mainly used in the package of raw cotton, waste cotton in the cotton mill and ginning plant. It is also can be used for packing some scraps and other soft goods. This machine is easy to operate with automatically hydraulic packing device. Overall dimensions:1440mm*690mm*4200mm Machine weight: 2600kg Packing size: 1000mm*500mm*800mm( can be changed) Packing weight: 60-130 kg Rated working pressure: 12Mpa Packing pressure: 10Mpa Motor power: 7.5kw The stroke of oil cylinder: 1400mm
This machine is mainly used in pressing finished cotton after processing by cotton waste recycling machine. It also can be used in pressing cotton craps, clips, threads, car interior material, flax and papers. Overall dimensions: 1150mm*850mm*2250mm Weight :750kg Baling size: 1000mm*500mm*1000mm Baling weight: 80-120kg Motor power: 4kw-5.5kw
This textile waste recycling machine uses high-speed centrifugal force when operating to get rid of impurities in cotton and at the same time loosen the lint cotton. This machine is mainly to process all kinds of lint cotton, old quilt, cotton clips, landing cotton and flock etc. Main technical parameters: Output:100-120kg/h Capacity of removing impurities:6%-10% Diameter of cylinder:250mm Rotation speed of cylinder: 1900 rpm/min 5 .Diameter of pressure cotton roll: 1400mm*985mm 6. Fan: 1.1kw 7. Rotation speed of fan: 2900rpm/min 8 chain: t=19.5mm 9. Model of taker-in: 5610*1.09*6 teeth/inch Bearing of taker-in: 111308 dust cage double chain wheel:205 11. Motor equipped: 7.5kw and 5.5kw four grade 12. Overall dimensions: Length: 3380mm width: 1500mm height: 1150mm
This textile waste recycling machine uses high-speed centrifugal force when operating to get rid of impurities in cotton and at the same time loosen the lint cotton. This machine is mainly to process all kinds of lint cotton, old quilt, cotton clips, landing cotton and flock etc.
This textile waste recycling machine uses high-speed centrifugal force when operating to get rid of impurities in cotton and at the same time loosen the lint cotton. This machine is mainly to process all kinds of lint cotton, old quilt, cotton clips, landing cotton and flock etc. Dimensions:7540mm*1500mm*1150mm Output:100-120kg/h Cylinder diameter: 600mm for opener, 250mm for recycling machine Motor power: 18.5kw+7.5kw+5.5kw+5.5kw+5.5kw+4kw+4kw
Vertical and automatic hydraulic baling machine for raw cotton This baling machine is designed as per our customers' requirements, having the features of high automation, labor cost and time saving. It is mainly used in the package of raw cotton, waste cotton in the cotton mill and ginning plant. It is also can be used for packing some scraps and other soft goods. This machine is easy to operate with automatically hydraulic packing device. Overall dimensions:1440mm*690mm*4200mm Machine weight: 2600kg Packing size: 1000mm*500mm*800mm( can be changed) Packing weight: 60-130 kg Rated working pressure: 12Mpa Packing pressure: 10Mpa Motor power: 7.5kw The stroke of oil cylinder: 1400mm
Product Detail (1) Adopts Germany "Heusch" shears and blade.  (2) Adopts metal detectors, accurate measurement for metals in the cloth and protection the service life of shears.  (3) Deviation rectifying device is equipped in front of the machine, saving labour force and time and increasing efficiency.  (4) Hydraulic transmission, more stable , high-speed operation.  (5) The innovation of air suction technology, can drain shearing wool clean and fast.
Working width: 2000mm  2200mm  2500mm   Diameter of polishing roller: Ï?370mm Heating type: electrothermal tube Temperature polishing of roller: 5~250°C±5°C Delivery speed: 5~16m/min,inverters to adjust speed. Rotary speed of front polishing roller: 915r/min Rotary speed of rear polishing roller: 880r/min Heating power: 2x49.2KW(2000mm)2x52.2KW(2200mm)   Total power: 121.4KW(2000mm) 127.4KW(2200mm) 137.9KW(2500mm)
MB331X7036 Φ70 mm(36 raising rollers) is suitable for goral fabric, bottom cloth of fake leather, warp knitted industry.  MB331X7024 Φ70 mm(24 raising rollers) is suitable for blanket and woolen industry Product Details (1)Adopts quick-exchange belt and cleaning device, multifunctional expanding device, and 8 pieces of spare belts. (2)The belt are completely loosen when machine keeps off, easier to clean broken fabric, safe and high efficient. (3)Adopts blast cooling on electronical cabinet, avoid dust and waste getting in.  Critical components of World Famous Brand make stable quality and good performance Package & Delivery (1) We use export standard package, wooden case to delivery machines, adopt necessary measures on moisturep roof and anti-corrosion from air and sea.   â??â??â??â??â??â??
3kg yarn dyeing machine Parameters Technical functional requirements 1ã?�It is suitable for pre treating , dyeing and finishing of cheese, large package cheeseï¼?loose fibersï¼?top, flat belt and so on; 2ã?�Three 1kg cheese for once high temperature dyeing; 3ã?�Computer control heating,cooling, and constant temperature; 4ã?�Surfaces can be dealt with high temperature resistant stainless steel metallic paint,Interior can be dealt with Acid Cleaning Passion; 5ã?�Equipped with automatic valve . Main cylinder with liquid level controller , safety interlocking mechanism , and security protection can be set 80â??; 6ã?�Mechanical seal with silicone seal rubber of type O and PTFE gasket;
20-80g yarn or fabric dyeing machine Introduction Huaxia company designs a new generation beam cloth cheese tester with the advantages of double-cylinder dyeing machine. As a four-cylinder cheese dyeing machine with four cups in each cylinder, this tester is applicable to simultaneous dyeing for textile fabrics with weight with 20-80g and different bath rates. It will complete cycling of dye liquor without water pump with injection pressure adjustable. It allows dyeing, washing, reduction of washing, and neutralization, soft, dyestuff test and so on. Dyeing fabric and yarn: Fabric,Yarn,Acrylic,Polyester,Fiber,Cotton,Rayon,Knitted fabric,woven fabrics.
This machine is the preparative machine for rebar connection in construction work. Its main function is to forging the end part of rebar to raise the rebar area and therefore enlarge the strength of rebar end. Parameter: Upset forging machine: Mode: bdc-auto 1 Suitable rebar coupler: 16-40mm Voltage: 380v/3 phase Nom. Upset force: 2000kn Dimensions(mm):1300*680*1400 Weight: 850kg Hydraulic pump: Mode: xb6.3/80 Nom. Oil pressure : 80-90mpa Nom. Flow: 10.00l/min Power of main motor: 7.5kw Dimensions(mm): 800*550*900 Weight: 150kg
This machine is used to cut the thread for rebar end after cold forging.And it can also be used for thread rolling as well as bolt length above 500mm,unlimited length bolts. Parameter: Rebar diameter range:16-40mm Output speed reducer: 62r/min Electric motor power: 5.5KW Water pump motor power: 0.15KW Cutting head movement distance: 150mm or unlimited Out dimension(mm):1700*1000*1400mm Weight: 1200kg
BRAND : LEONARDO QUANTITY : 8 PCS WIDTH : 360 CM YOC : 2004 JACQUARD : STAUBLI CX870 - 2688 FULL - JC5 ACCESSORIES 4 WEFT FEEDER 1,5 WARP BEAM 1,5 CLOTH ROLLER HARNESS ON LOOMS WITHOUT GANTRY HARNESS ARE NEW. LOOMS ARE RUNNING AND EXCELLENT CONDITION.
TABER 5750 Abrasion Tester Standards: ASTM D3884 ? ASTM D1175 ? ASTM D1044 ? ASTM D4060 ? TAPPI T476 ? ISO 9352 ? ISO 5470-1 ? JIS K7204 ? JIS A1453? JIS K6902 ? JIS L1096 ? JIS K6964 ? DIN 52347 ? DIN 53109 ? DIN 53754 ? DIN 53799 TABER 5750 Abrasion Tester with CE certificate, also CE safety signs TABER 5750 Abrasion Tester Applications: TABER 5750 abrasion tester make performance test of any size or shape of any sample for abrasion tests with a contoured surface and the polishing surface characteristics of the product, highly desirable (such as: computer mouse and other computer or IT products plastic paint wear tests, used for plastics, auto parts, rubber, leather and textile, electroplating, free removal of components, paint products, printing, design, and other products. TABER 5750 abrasion testing machine Features: Used to evaluate the wear resistance, scratch resistance (single or multiple scratches) and color transfer of (usually abrasion discoloration or abrasion fastness) and so on. Dry abrasion test, wet abrasion test can be carried out. Abrasion Tester includes a host 5750, three disc-shaped weights 250g, 10 CS-10 and H-18 5 grinding rubber, 50 S-14 sandpaper and wear depth measurement etc. Linear abrasion tester detailed parameters: 11 kinds of optional moving distance Moving away from standard 0.2 ", 0.5", 0.61 ", 0.75" 1.0 ", 1.5", 2.0 ", 2.5", 3.0 ", 3.5" and 4.0 " It can be customized special mobile distance." Adjustable back and forth moving speed of 2 to 75 / min. Wherein 2, 15, 25, 30, 40 and 60 back and forth / min six speeds, it has six preset buttons on the operation panel The number of revolutions: Can be set up to transfer 999,999 (Note grinding rubber during this time may need to be replaced) Alternatively load Standard load range is from 350g to 2100g (250g weight generally random configuration of three weights.) • Variety of optional weight Abrasion Tester has five selectable moving distances: Moving away from standard 0.5 ", 1", 2 "3" and 4 " It can be customized special mobile distance Adjustable back and forth moving speed of 2 to 75 / min. Wherein 2, 15, 25, 30, 40 and 60 back and forth / min six speeds, it has six preset buttons on the operation panel TABER 5750 wear testing machine main features: Simulate real conditions of use: You can set the moving distance, speed, rpm, load and other parameters Choose a variety of different media and wear parts. (Optional sample fixing table and other optional accessories, with the scratch, the extent of damage was measured and resistances to alcohol testing, measuring coin scratch resistance and the like.) Ensure the stability and accuracy of the test: Grinding its general size and shape as the end of a pencil eraser head are made of high quality wear materials. Ensure the stability for test. Laser guided placement test samples to ensure the accuracy of the test. more view on http://www.abrasiontesters.com/taber-5750-abrasion-tester.html
Hexapod Tumbler Tester Standards of Hexapod Tumbler Tester: The Hexapod Tumbler Tester is a popular apparatus used in the evaluation of the appearance retention of carpets. Product information of Hexapod Tumbler Tester: Widely used in the evaluation of the appearance retention of carpets Can test with underlay underneath the carpet Provides a rapid method of test - completion within one working day Test Method of Hexapod Tumbler Tester: Specimens of carpet are fastened to a flexible backing sheet with double-sided adhesive tape. This assembly is fitted on the inside surface of the drum and can easily be removed at any stage for inspection of the specimens under test. If required, an underlay may be fitted beneath the carpet for direct comparison with normal use. The drive to the drum incorporates a reversing mechanism to give more realistic pile disturbance, and the required number of revolutions may be preset on a revolution counter. The 3.8kg tumbler has six polyurethane stud feet. The carpet specimens are treated for 2,000 revolutions, which takes approximately one hour. They are then taken out of the drum on their backing sheet and cleaned using an upright vacuum cleaner simulating practical usage. The specimens are replaced and the treatment repeated, normally six times, giving a total of 12,000 revolutions. After the final vacuum cleaning, the change in appearance is assessed against an appropriate set of ISO reference scales. _ Drum liner Technical Parameters:
VGOTECH GSM ROUND CUTTER – GSM cutter is used for determining GSM of knitted, woven and non-woven fabrics. It is used to prepare the sample for calculating the GSM (Gram per Square) of fabric. With lock system for total safety. with 4Nos Imported Blades and 2Nos. Rubber Pads Specimen Area : 100 Cm2Specimen Diameter : 113 Mm (Approx)Type Of Cut : Standard box size: 10x10x9inch, weight-5kgs
