TMI 1.1.200326iii
Product Description
The Full automatic textile rubber cots take off machine is newly developed for take off the rubber cots from the roller bearing, It is a new generation of cots take off machine.
The Full automatic textile rubber cots take off machine is mainly used in spinning mill to carry out take off the rubber cots from the roller bearing. This machine is a fully automatic machine, which greatly saves labor. It's excellent take off quality helps in improving manufacturing efficiency & saves time and cost of operation.
The Full automatic textile rubber cots take off machine has an automatic feeding. It automatically takes off the rubber cots from the roller bearing & the products are of a high precision take off.
Technical Specifications
Feeder power: 0.35 Kw
Production: 300-400 Sets / hour
Air pressure: 5 Kg or more
Function: fully automatic take off aluminium bushing rubber cots, double layer rubber cots onto the roller bearings.
TMI 1.1.200326i
Product Description
The Full automatic textile rubber cots grinding machine is new developed for grinding rubber cots, it is a new generation of cots grinding machine.
The Full automatic textile rubber cots grinding machine is mainly used in a spinning mill to carry out grinding of rubber cots. This machine is a fully automated machine, which greatly saves labor, provides excellent grinding quality to improve manufacturing efficiency & save the time and cost of operation.
The Full automatic textile rubber cots grinding machine has an automatic feeding. The processing of rubber cots is of a high precision grinding & end surface level off is smooth.
Technical Specifications
Grinding wheel motor power: 2.2 Kw
Rotating motor power: 180 W
Displacement motor power: 180 W
Dust collection fan power: 750 W
Feeder power: 0.3 Kw, 220 V
Air pressure: 5 kg or more
Production: about 300-360 PCS/H
TMI 20.4.200416
Product Description
High speed air jet loom is with the rigidity of machine frame and top beam further strengthened. The whole machine is of a desired stability, beating system & is better optimised. Structure is further improved. Beating may be done with four or six-shedding levers. With the six-shedding lever, the warp yarn has longer opening hours, as a result, this high speed air jet loom will be better for weft yarn insertion. Especially suitable for wider fabric weaving, so it extends the weaving scope on our high speed air jet loom
Technical Specifications
Reed Width: 150 cm, 170 cm, 190 cm, 210 cm, 230 cm, 260 cm, 280 cm, 320 cm, 340 cm, 9000px
Drive: New designed motor; Electromagnetic brake; But on control
Weft selection: 1,2,4 or 6 colors
Weft insertion: The main and auxiliary nozzles are electronically controlled
Beating: Solid beating shaft with multiple foot stand, Four crank shedding beating
Let-off: Electric let off, 800 mm beam pipe
Take-up: Electric take up, Max rolling 600 mm
Heald frame: 6-16 Pcs on low price by Tsudakoma tech weaving air jet loom
Shedding: crank shedding/positive cam shedding/electronic dobby shedding
Air supplying: Centralised air compressor
Speed: 500~1000rpm
Power: 2.8kw,3.0kw,3.8kw,4.5kw
Weft density: 5-60 picks/inch
Yarn account: 10-60S
Cutting: Mechanical
Selvedge: Closed selvedge with tuck-in device
Wires: 10000 pieces
Dropper: 10000 pieces
Reed: 1 piece
Back rest: Double back rest,removable back rest seat on the back of high speed air jet loom
Electric control box: Touchable screen; Controlled by computer; parameter setting and controlling, auto diagnosis
Stopping device: 4 color LED lights, cracked ends: 6 line droppers, broken picks, two weft feeler, Leno edge apparatus, near switch, Capture side of weft yarn, sensor
Gears in main box: T tooth with QT700 material
Belt: Brand: Chinese, excellent quality, longer life
Gear shaft: 45# steel with High frequency quenching process
Oil seal: CTY GERMANY
Oil nipple: Taiwan
Crossbeam: Triangular steel, weaving steadily
Lifting: Solid supporting, Thickened pipe,imported bearings
Painting: Polishing, sandblasting, baking finish
Iron castings: Weight of the high speed air jet loom, iron castings are increased
TMI 21.5.200416
Product Description
This can be compared with almost all other advanced version of modern water jet looms ranging from let off system, shedding section, take-up section, drive system and more. It is suitable for super high speed and steady working, excellent performance in weaving high density cloth winder workable range of yarn and fabric. The optional single-pump double nozzle electronic measuring & storage system, two-pump two nozzle electronic measuring& storage system,tappet shedding device, dobby shedding device can be mounted on this
Technical Specifications
let off/take up: Electronic or mechanical
shedding: plain or cam or dobby
feeder type: Electronic or mechanical
Reed width: 150 cm, 170 cm, 190 cm, 210 cm, 230 cm, 260 cm, 280 cm, 340 cm, 9500 px
Filling insertion rate: 2,280m/min max.
Head frame:
Tappet shedding: 2, 4, 6, 8, 10 12pcs max.
â??Dobby shedding: 16pcs max.
Power: 2.2kw 3.8kw
Weft density: 5~60picks/cm
Rotational speed: 1,200rpm max.
Brand of pump, plunger, bush, transmission etc are optional.
TMI 45.48.4.200429 - Multifunctional Suction Blower Bridge Type Ironing Table
Product Details
Mufti functional suction type hot blast Bridge station electronically controlled pneumatic operation, simulated human body structure design reasonable ironing table according to the human level down automatically, the other with a unique suction blower unit. In the middle of the ironing table applies to all types of clothing, finished ironing on the exhaust, throttle control die conversion foot switch controls the main motor, saving energy according to user requirements, configure iron hanger is Aurora lighthouse.
Operating principle:
The ironing table using multi-blade centrifugal impeller, suction, low noise, dehumidifiers styling effect using quality materials, melt suction dehumidifiers to wave inone, tops, perforated moulding and self-absorption using blast high-speed motor by hand ironing station, multi blade centrifugal fan wheel, automatic dehumidifier has reasonable structure design steam ironing table.
Equipment Features:
1.Self-priming suction blast of hot air scouring counter tops, hot and cold spotting gun, scouring ironing can be synchronised, time-saving station comes
2.Suction blast ironing table comes with lighting facilities and ironing saving devices, easy and flexible, lightweight and extremely.
3.Suction blast ironing table configuration efficient steam separator device and the Italian original electric steam iron.
4.Full computer control, suction, blowing fast switching, simple operation, automatic water, soft drinks automatic separation system.
5.Using imported sponges, crisp and permeability is good. Luxury fashion exterior design, manufacture beautiful, economical and practical, superior performance, is the ideal Equipment to replace imports of similar products.
Product Usage:
It is suitable for all kinds of fabrics and semi finished products, iron, cotton, wool, synthetic and blended fabrics, the fabric flat after ironing, very wide, can not afford to light, shaping effect, does not damage the weave, the production of shirts, fashion, sheep sweaters, suits and other clothing necessary ironing equipment.
6401 Textile Machinery Equipments Suppliers
Short on time? Let Textile Machinery Equipments sellers contact you.
TMI 60.1.1.200402 - DISK BALE PLUCKER Spinning Machinery
Product Description
Disk bale plucker is suitable for the plucking of all classes of raw cotton, cotton chemical fiber and middle-long fiber shorter than 76mm. Itâ??s the first procedure of the machine and consists of pulley, central axis, expansion tube and ground rail, etc., and this model can be used in double.
For a large number of raw material varieties with great differences, this model helps improve the number of mixed bale and reduces the mixing units & working quality.
Disk plucker is an important machine in blowing-carding line. It is applicable for kinds of raw cotton. Cotton content chemical fiber, middle and long chemical fiber, generally two set of plucker are put into production in parallel. Plucking beater go down interval and rotate with carriage to pluck cotton sequence. Cotton plucked is transported to the next machine via duct.
Disk plucker adopts a saw-toothed beaters ,which are divided into 3 groups,and fixed from inside. From inside to outside according to the tooth setting from thin to thick so as to get fibers minor and uniform,thus itâ??s advantageous to the blending and cleaning of next process.
â??
Technical Specifications
Production (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Rotating Speed in r/min: 740 r/min
Knife out of Rib / Blade extension from grid in mm: 2.5 - 7.5 mm
Crab Slewing Speed in r/min: 0.59 - 2.96 r/min
Ground Rail External Diameter in mm: 5192 mm
Total Height in mm: 4155 mm
General Power in Kw: 4.17 Kw
Net weight in Kg: Around 1600 Kg
TMI 70.1.1.200403 - DISK BALE PLUCKER New Spinning Machinery
Product Description
Disk plucker is an important equipment in blowing-carding joint machinery. It is suitable for each kind of raw cotton, cotton content chemical fiber, middle and long chemical fiber. Generally two set's of plucker are put into production in parallel. Plucking beater goes down the interval and rotates with carriage to pluck cotton in sequence. Cotton is plucked & transported to the next machine via duct. It Consists of a Flexible pipe, Carriage frame, Outer wall, Beater wall, Beater, Rail, Inner wall & Ring.
Technical Specifications
Production Output (kg/h): 800 - 1000 kg
Loading Capacity / Cotton Piling Weight in kg: 2000 Kg Each (Around 2 sets)
Outer Wall Diameter in mm: 4760 mm
Inner Wall Diameter in mm: 1300 mm
Speed of Carriage in r/min: 1.6 - 2.2 r/min
Beater Speed in r/min: 740 r/min
Blade extension from grid in mm: 2.5 - 7.5 mm
Rail Diameter in mm: 5132 mm
Total Height in mm: 3864 mm
Power in Kw: 4.1 Kw
Weight in Kg: Around 1600 Kg
Product Description
Reciprocating bale plucker is one of the first process of Blow room & carding Department. It is suitable for each kind of cotton, chemical & viscose fibre length less than 76mm. The pluck arm, mounted with two beaters, can lift and revolve 180 . The pluck arm is moved to and back to pluck fibre above bale. The fibre plucked are sucked into the front feeder by air current through transport duct for further process.
Technical Specifications
Beater Width: 1720 mm (Special) & 2300 mm (Normal)
Production Kg/h: 1000 Kg/h & 1500 Kg/h
Basic Pile Weight: 6000 Kg & 7500 kg
Length of Floor Space: Basic Type 22.03 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n
Bales Arrangement Length: Basic Type 15.9 m (8 Sections of Air ducts) can be Increased or Decreased by 2.5 m x n
â??Intermittent Dropping of Beater: 0.5 ~ 10 mm/time Frequency Control Usually 1 ~ 3 mm/time
Calender Roller Dia.�¦130 mm Both Sides; Middle �¦116 mm
Carriage Reciprocating Speed: 16.4 m/min (max); Generally 10 m/min
Installed Power: 8.6 Kw & 10.6 Kw
Overall size: 22030*5212*3082 & 22030*6648*3082
Net weight: 6000 Kg & 6500 Kg
TMI 60.5.1.200412 - FINE OPENER Spinning Machinery
Product Description
Fine Opener is suitable for further opening and impurities removing of all classes of raw cotton, cotton chemical fiber and the middle to long chemical fibers shorter than 76mm. It mainly consists of cotton store and feeding construction that features strong opening and good effect of impurity removing.
Technical Specifications
Machine Type: TMI 60.5.1.200412a
Production: 800 Kg/h
Width: 1060 mm
Beater type: Hedgehog
Beater diameter mm: 610
Beater rotating speed r/mm: 480
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(L WH): 1810 X 1650 X 3875(including Condenser)
Machine weight: 1800
Machine Type: TMI 60.5.1.200412b
Production: 600 Kg/h
Width: 1060 mm
Beater type: Card wire roller
Beater diameter mm: 600
Beater rotating speed r/mm: 540
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(LÃ??WÃ??H): 1810Ã??1650Ã??3875(including Condenser)
Machine weight: 1800
Machine Type: TMI 60.5.1.200412c
Production: 600 Kg/h
Width: 1060 mm
Beater type: Sawblade
Beater diameter mm: 600
Beater rotating speed r/mm: 600
Hopper roller diameter mm: 76
Hopper roller rotating speed r/mm: 35-39.45
Grate Bar Type: Triangle grid bar
Adjusting type: Hand wheel out of machine
General Power kw: 3.55
Size(L X W X H): 1810 X 1650 X 3875(including Condenser)
Machine weight: 1800
