Fnad Electrical Appliance Plant, established is located in Ningbo, China. It is 2km away from Geely Automobile Industrial Park. It is a science and technology enterprise integrating with R&D, manufacture, trade and service. The Plant has focused on motor protection for more than years. It is specialized in applications of single-chip microcomputer technology in the fields of industrial control, power electronics and automobile electronics. Our main products include motor protectors, phase failure protectors, phase sequence protectors, volt-ammeters, surge protector, temperature controllers, etc. we have an in-depth study in prevention of occurrence of phase failure, phase sequence, overload, under-load, overvoltage, under-voltage, three-phase imbalance, over-current and similar abnormalities in customersâ?? equipments and provide such solutions as prevention, alarming and equipment protection. It supports major elevator plants, thermal power plants, automobile plants, crane factories, textile mills, refrigerating plants and chemical plants and provides solutions for them. Some products have passed CE certification and ROSH environmental certification of European Union. We endeavor to make the company to be listed in Hong Kong in 2020. Welcome to visit and communicate with us. -
Fnad Electrical Appliance Plant, established is located in Ningbo, China. It is 2km away from Geely Automobile Industrial Park. It is a science and technology enterprise integrating with R&D, manufacture, trade and service. The Plant has focused on motor protection for more than years. It is specialized in applications of single-chip microcomputer technology in the fields of industrial control, power electronics and automobile electronics. Our main products include motor protectors, phase failure protectors, phase sequence protectors, volt-ammeters, surge protector, temperature controllers, etc. we have an in-depth study in prevention of occurrence of phase failure, phase sequence, overload, under-load, overvoltage, under-voltage, three-phase imbalance, over-current and similar abnormalities in customersâ?? equipments and provide such solutions as prevention, alarming and equipment protection. It supports major elevator plants, thermal power plants, automobile plants, crane factories, textile mills, refrigerating plants and chemical plants and provides solutions for them. Some products have passed CE certification and ROSH environmental certification of European Union. We endeavor to make the company to be listed in Hong Kong in 2020. Welcome to visit and communicate with us. -
Key Specifications/Special Features Product Parameters Model LY1-B100 Uc 385V DC In 60kA Imax 100kA Up â?¤2.5kV Poles 4P Installation 35mm Din rail installation Fuse or switch matched 32A Response time
Model Number:HL90/HL80/HL60/HL40/HL91/HL81/HL61 Brand Name:Ziasiot Origin:China (mainland) Key Specifications/Special Features: DescriptionIntelligent digital indicator is usually used to work with pressure sensor whose signal type can be mV/V,4-20mA,0-10V,0-5V,etc.,it adopts relay output control and outputs through current or voltage transmitter, RS485communication, RS232 communication etc. This series adopts switching mode power supply, and the anti- interference grade can reach 4800V group pulse. Characteristic: High measuring accuracy,strong anti-interference Small size ,light weight Diverse control output Fast response Simultaneous pressure&temperature display available Applications: Chemical fiber industry Injection molding industry Rubber industry
B series humidity controller with completed FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows humidity curve by automatically. User can adjust humidity value very easily to use dial, and a LED indicator to show the relay status. Function & Feature ·DIN(48X48mm) Humidity Controller ·Built-in digital filter reduce interfere ·Self calibration technology, keep stabilization ·Switching power supply and low consumption. ·Use large capacity relay
B series temperature controller with completed FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. user can adjust temperature value very easily to use dial, and a LED indicator to show the relay status. Function & Feature ·DIN(48X48mm) Temperature Controller ·Control accuracy 1 ·Built-in digital filter reduce interfere ·Self calibration technology, keep stabilization ·Switching power supply and low consumption. ·Use large capacity relay
Intelligent humidity controller with completed FUZZY algorithm provides very precise of temperature monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows humidity curve by automatically. Display unit can show environment humidity as per configure by user. The user also can adjust environment condition very easily. Function & Feature ·DIN rail mounting Humidity Controller ·Indication and control accuracy 0.1??, high measurement ·Heat/Fan control and PID control mode ·All settings except time maintained permanently in non-volatile memory until changed by user ·Built-in digital filter reduce interfere ·Self calibration technology, keep stabilization ·LED display show the data, prevent dazzle, highly visible display ·Simple 3-Button user interface ·Switching power supply and low consumption. ·Use large capacity relay
Intelligent humidity controller with completed FUZZY algorithm provides very precise of temperature monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows humidity curve by automatically. Display unit can show environment humidity as per configure by user. The user also can adjust environment condition very easily. Function & Feature ·DIN rail mounting Humidity Controller ·Indication and control accuracy 0.1, high measurement ·Heat/Fan control and PID control mode ·All settings except time maintained permanently in non-volatile memory until changed by user ·Built-in digital filter reduce interfere ·Self calibration technology, keep stabilization ·LED display show the data, prevent dazzle, highly visible display ·Simple 4-Button user interface ·Switching power supply and low consumption. ·Use large capacity relay
Blue Jay Electronic provide temperature & humidity logger solution, build on our temp. & RH controller can control environment condition and record the temp. vibration. The time interval is set by programming can be from 1 second to 2 hours. Use EEPROM s which can store up to 40,000 measurements. This could be one measurement every 30 seconds for 11 days for example. The control function with completed FUZZY algorithm provides very precise of temperature & humidity monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. Display unit can show environment temperature and humidity as per configure by user. The user also can adjust environment condition very easily. Function & Feature ·DIN(48X48mm) or panel mounting ·High measurement indication and control accuracy 0.5?? and 3% RH ·Heat/Cool control and PID control mode ·All settings except time maintained permanently in non-volatile memory until changed by user ·Built-in digital filter reduce interfere ·Self calibration technology, keep stabilization ·Two line LED display show the data Independent, prevent dazzle, highly visible display ·Simple 4-Button user interface ·Switching power supply and low consumption ·Use large capacity relay ·RS 485 interface, easy to get raw data
Intelligent humidity controller with completed FUZZY algorithm provides very precise of temperature monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows humidity curve by automatically. Display unit can show environment humidity as per configure by user. The user also can adjust environment condition very easily. Function & Feature ·DIN(48X48mm) Humidity Controller ·Indication and control accuracy 0.1??, high measurement ·Heat/Fan control and PID control mode ·All settings except time maintained permanently in non-volatile memory until changed by user ·Built-in digital filter reduce interfere ·Self calibration technology, keep stabilization ·LED display show the data, prevent dazzle, highly visible display ·Simple 4-Button user interface ·Switching power supply and low consumption. ·Use large capacity relay
Blue Jay Electronic provide temperature & humidity logger solution, build on our temp. & RH controller can control environment condition and record the temp. vibration. The time interval is set by programming can be from 1 second to 2 hours. Use EEPROM s which can store up to 40,000 measurements. This could be one measurement every 30 seconds for 11 days for example. The control function with completed FUZZY algorithm provides very precise of temperature & humidity monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature curve by automatically. Display unit can show environment temperature and humidity as per configure by user. The user also can adjust environment condition very easily. Function & Feature DIN(48X48mm) or panel mounting High measurement indication and control accuracy 0.5â?? and 3% RH Heat/Cool control and PID control mode All settings except time maintained permanently in non-volatile memory until changed by user Built-in digital filter reduce interfere Self calibration technology, keep stabilization Two line LED display show the data Independent, prevent dazzle, highly visible display Simple 4-Button user interface Switching power supply and low consumption Use large capacity relay RS 485 interface, easy to get raw data
Intelligent temperature & humidity controller with completed FUZZY algorithm provides very precise of temperature monitor. FUZZY algorithm control fan or heater to maintain sensible & latent capacity follows temperature/humidity curve by automatically. Display unit can show environment temperature and humidity as per configure by user. The user also can adjust environment condition very easily. Function & Feature ·DIN(48X48mm) Controller ·Indication and control accuracy 0.1, high measurement ·Heat/Cool control and PID control mode ·All settings except time maintained permanently in non-volatile memory until changed by user ·Built-in digital filter reduce interfere ·Self calibration technology, keep stabilization ·LED display show the data, prevent dazzle, highly visible display ·Simple 4-Button user interface ·Switching power supply and low consumption. ·Use large capacity relay
Ozone aging test chamber use ozone generator to produce high concentrations of ozone, can be used for non-metallic materials, organic materials (coatings, rubber, plastics, paints, pigments, etc.) aging test under ozone conditions. Chamber structure and features 1, internal material adopts high quality mirror stainless steel for ozone resistance. 2, insulation material: high-density glass fiber 3, use long axial fan motor and high and low temperature resistant aluminum alloy wing type wind turbines to force vertical air circulation. 4, chamber door adopts double layer high and low temperature resistant silicone seal ensure the airtight test area. 5, chamber bottom has high quality caster for convenient move. 6, observation window uses multilayer hollow tempered glass. 7, exhaust system: exhaust the high concentration ozone from the test chamber to avoid to poison. 8, optional: built-in 360 degree rotation sample holder, including 3 sets static tensile fixture and 3 sets dynamic tensile fixture.
Xenon aging test chamber can simulate the full sunlight spectrum of xenon arc lamp to reproduce the destructive light waves in different environments, to provide the appropriate environmental simulation and accelerated test for scientific research, product development and quality control. Main feature: 1, ventilation system: automatic controlled by temperature controller, and inner chamber cooled by refrigerating system 2, back panel thermometer: adopt wired transmission technology, which highly improve the control accuracy. 3, temperature sensor: pt100 platinum resistance thermocouple. 4, equip with intelligent temperature and humidity controller, with pid adjustment and rapid self-turning. It can set several parameters to do cyclic test, directly digital temperature display for easy reading. 5, multiple protective devices: over temperature protection, water leakage alarm, over pressure of compressor, electricity leakage protection, alarm and auto power offer protection. In order to protect xenon light, the light will turn off automatically once open the door.
Uv aging test chamber uses a fluorescent uv lamp as a light source to accelerate the weatherability test of the material by simulating uv radiation and condensation in natural sunlight to obtain the result of weatherability of the material. Applications 1. Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature. 2. To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation. 3. Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects.
Thermal shock test chamber used to test the extent of the structure of materials or composite materials in an instant extremely high temperature and low temperature in a continuous environment in order to test chemical changes or physical damage in the shortest possible time caused by thermal expansion and contraction. Main parameters: Test method Pneumatic operated door switch 3 chambers Inner dimension (w*d*h) 500*450*450mm External dimension (w*d*h) 1380*1370*1980mm Temperature range -40 ~ +80 High temperature chamber pre-heating range 60 ~ 100 Heating speed +60+100 about 10 minutes Low temperature chamber pre-cooling range -65 ~ 0 Cooling speed Ambient -65 about 65 minutes Temperature deviation ±3 Thermal recovery time Within 5 minutes External material Antirust processing cold-rolled steel sheet Internal material Sus#304 stainless steel Thermal insulation material Polyurethane foam and fiberglass Coolant R404a / r23 Cooling method Air cooling Pressure 0.2 - 0.5mpa Power supply Three phase, 380v, 50hz Features: 1.Perfect appearance and easy to operate. 2.Japan lcd english microcomputer temperature controller, with high memory capacity, can save 100 programs, max 9999 cycles, each cycle max time 999hrs. 3.Three chamber structures, high temperature chamber, low temperature chamber and test chamber, control automatically, stay and switch time adjustable. 4.Perfect protection alarm functions: short-circuits, leakage, over temperature of work chamber; compressor over pressure, over load, short water?¦ 5.Control interface will display alarm reason and provide check methods, machine has emergency stop button. 6.Cold and hot shock temperature recover within 5 minutes, which complies with mtl, iec, jis, gjb and other international standards. 7.With rs-232c communication port for connecting pc to control, record and save test report.
Solar/poe charge controller + gigabit poe injector Model : bc-4024-g56d 1. Input : 1.1 input voltage: poe : 36vdc ~ 57vdc Solar : 30v ~ 45v Battery : 24v 2. Output : 2.1 output voltage & current: Output : 56v poe(front) / 24v load(rear) Max. Current : 0.63a poe(front) / 10a load(rear) 3. Charger : 3.1 poe charge current : 0.85a (max) For load first, only the balance used to charging. Only work with battery connected. 3.2 poe input watts : 30w(min) 3.3 poe input compliant to 802.3at, all 4 pairs available, giga. 3.4 solar charge current : 40a(max) 28.4, 0.3v vin.
Magnetic Pointer Rail Thermometer is used to measure the temperature of rail. rail thermometer is not only dedicated to measure the temperature of the railway rails, but also can measure the air temperature and the surface temperature of other objects.
Control device.
Electronic instrumentation controls.
