8m lockable pneumatic telescopic mast Description Item : NR90309180 18m lockable pneumatic telescopic mast 15kg payloads/3.3m retracted height/ 9 sections/ mast weight 130kg approx.
Description part : MLT-4200-2000 (order : 020101) Gasoline Generator Mobile Light Tower 4.2m Pneumatic Telescopic Mast with inner cables 2.8KW Gasoline Generator Set, Electric start. 4x500W halogen lamps mast extend/retract automatic by electric air compressor
Description 21m pneumatic telescopic mast mounted mobile trailer tower system Part : MTMT-21000 (order : 040103) 21m lockable pneumatic telescopic mast, 100kg payloads Mobile Trailer Hydraulic tilting system
JXDH-6503C is a new compact (1RU only) chassis and cost-effective QAM modulator, JXDH-6503C has 1 modules, 1 1000Mbps IP inputs, 1 SPF input, the RF output supports 16QAM~256QAM modes. The JXDH-6503C has very convenient management interface, the user can complete all operation access through the Ethernet port on device.
Applicable fiber SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655), others(including G.657) Cladding diameter 80 -150m Coating diameter 160 -900 Typical splice loss SM 0.02dB, MM 0.01dB, DS 0.04dB, NZDS 0.04dB Return loss
Technical Specifications1 Wavelength (nm) 1310/1550 Dynamic range (dB)2 38/36, 32/30 Pulse width (ns) 5,20,40,80,160,320,640,1280,2560,5120,10240,20480 Event blind zone (m)3 2m Attenuation blind zone (m)3 9m Linearity (dB/dB) ±0.05 dB/ dB Loss threshold (dB) 0.05 Loss resolution ratio (dB) 0.01 Sampling resolution ratio (m) 0.125 to 8 Sampling point 32K Distance uncertainty (m) ±(1 m + 510-5 distance + sampling interval) Distance scope (km) 0.3 to180 Typical real-time refreshing duration (s) 0.2 Memory capacity of trace SD Card (2G), > 10000 pieces Duration of measurement Defined by user; 5sec, 10sec, 15sec, 30sec, 1min, 2min, and 3min are selectable General specification Dimension (HWD) 15023566 Weight 1.5kg Temperature Running temperature -10 to 50 Memory temperature -40 to 70 Relative humidity 0% to 95% (non condensation) Power supply Lithium battery; continuing working duration ?¥ 8 hours Warranty period 12 months Remarks: 1. The technical specification describes the ensured performance of the instrument when using typical PC model connector to measure. Without considering the uncertainty caused by optical fiber refractivity.2. Dynamic range is the data measured under the condition of the maximum pulse width and 3 minutes of average time. Dynamic range is the data measured under the condition of 180km/20480ns/3min. 3. Measuring conditions of blind zone: reflection event is within 4Km, reflection strength < -35dB. Measured by the minimum pulse width.
Wavelength(nm) 800~1700nm Detector InGaAs Measurement? Range (dBm) -70~+3 -50~+26 Uncertainty ±5% Calibrated Wavelength(nm) 850,1300,1310,1490,1550,1625 Resolution(dB) 0.01 Optical Connector FC(interchangeable SC,ST) / as well as 2.5mm universal Power Supply Alkaline Battery(3 AA 1.5V batteries) Battery Operating Time 240 h with 1.5V Battery(3) Operating Temperature() -10 ~ +60 Storage Temperature() -25 ~ +70 Relative Humidity 0 to 95% (non-condensing) Dimension(mm) 200 X90 X50 Weight(g) 285
Operating wavelength(nm) 1310/1550 (others specify on requests, Max wavelength is 5 Applicable fiber SM ,MM Laser type FP-LD(others specify on requests) Maximum Output Power(dBm) -7(can be adjustable, others specify) Stability(dB, 15min, 20) ±0.1 Stability(dB, 30min, 20) ±0.05 Modulation(Hz) CW, 270, 1K, 2K Fiber Port FC/PC or FC,SC,ST interchangeable Alkaline Battery 3XAA, 1.5V Battery Operating time(h) 45 Operation Temperature() -10+60 Storage Temperature() -25+70 Outline sizemm 200 X90 X50 Weight(g) 285
Small, light, long battery life 4 motors accurate core alignment 250 times magnification of fiber cores 7s fast splicing, 26s intelligent heating More than 4000 times electrodes discharging 4400mAh Li-battery, 220 cycles splicing and heating Inductive automatic heater, not heating without fibers 3 in 1 multi-function clamps, new waterproof structure Apply to bare fibers, drop cables and jumper wires splicing
Bare fiber diameter 125m Outercoat diameter 0.25mm-0.9mm Fiber type Single tube fiber and Ribbon fiber(exchangeab Cleaved length 5-30mm Cleaved angle 0.5° blade life 48000 Mode Semiautomatic Dimension 59mm(W)55mm(D)49mm(H) Weight 257g
Central Wavelength 650nm±10nm Emitter Type FP-LD Output Power 1mw or 10mw Optical Connector 2.5mm universal connectorFor 1.25mm connectors, FC-1.25mm Hybrid adaptor can be optional on customer requests Operating Model Both CW and Pulse(2Hz) available Power Supply Two AAA alkaline batteries Battery Operating Time 650nm@1mw 45hours;650nm@10mw15hoursTest with Panasonic LR6 AAA ALKALINE battery Operating Temperature -10~+60 () Storage Temperature -25~+70 () Dimension (mm) 115*45*27 Weight 50g(Without Batteries)
Operating Wavelength 1550nm1310nm Optional Fiber Type 9/125um SM Fiber Optical Connector Type FC/PC Detector Type InGaAs Peak Power of laser(mw) 60 Max. Displaying Distance Reflection Event(km) 60 (1dB) Non-reflection Event(km) 20 (2.5dB) Measurement Unit M Reflection Event Dead Zone 15m Distance AccuracyReflection Event ±2m+2*10-4X Distance Wavelength of VFL Option(nm) 650 Output Power of VFL Option(mW) >=1 Date storage capacity 1000 Communication Port USB Power Supply Alkaline Battery (3pcs AA 4.5V Batteries) Battery Operating Time 5000 measurements Working Temperature() -5~40 Storage Temperature() -10~60 Humidity 0~85%Non-condensation Dimensions(mm) 200 X 90 X 50 Weightg 320
Model PON power meter 1310nm 1490nm 1550nm Pass Zone(nm) 12601360 14701505 15351570 Isolation (dB) >40@1490 >30@1310 >40@1310 Isolation(dB) >40@1550 >40@1550 >40@1490 Measurement Range(dBm) -40+10 -40+10 -40+20 Measurement Accuracy Connatural uncertainty(dB) ±0.5 Linearity(dB) ±0.1 Passing through insertion Loss(dB)
Applicable fiber SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655), others(including G.657) Cladding diameter 80 -150m Coating diameter 160 900m Typical splice loss SM 0.02dB, MM 0.01dB, DS 0.04dB, NZDS 0.04dB Return loss
Applicable fiber SM(G.652), MM(G.651), DS(G.653), NZDS(G.655), others(including G.657) Fiber count Single Applicable fiber dimensions Cladding diameter: 80 -150m, Coating diameter: 160 -900m Typical splice loss 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) Return loss >60db Fiber cleaved length 10-16mm (coating diameter< 250m ), 16mm(coating diameter: 250-1000m ) Splicing program 40 groups Operate mode Manual, Automatic Auto-heating Available Typical splicing time 8 seconds Tube heating time 26 seconds for 60mm and 40mm shrinkable sleeves Fiber view magnification 250X(X or Y view), 125X(X and Y view) Viewing method and display 2 CMOS cameras, 4.3 inch color LCD monitor Storage of splice result 4000 results Loss evaluation Available Tension test 1.8-2.2N Interface GUI menu interface, easier operation Battery capacity 5800mAh, typical 180 cycles(splice and tube heat), pluggable inner Li-battery Power supply Adaptor, input: AC100-240V(50/60HZ) Electrode life More than 4000 ARC discharges, can be replaced conveniently Terminals USB 2.0 port, for uploading splice results and upgrading software Operating condition Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10â??ï½?+50â??;Wind speed: max 15m/s Dimension 149mm(L)x120mm(W)x127mm(H) Weight 1.9kg including battery Applicable fiber SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655), others(including G.657) Cladding diameter 80 -150m Coating diameter 160 -900 Typical splice loss SM 0.02dB, MM 0.01dB, DS 0.04dB, NZDS 0.04dB Return loss
Identified Wavelength Range 800-1700 nm Identified Signal Type CW, 270Hz±5%1kHz±5%2kHz±5% Detector Type 1mm InGaAs 2pcs Adapter Type 0.25 , 0.9, 2.0, 3.0 Signal Direction Left & Right LED Singe Direction Test Range(dBm, CW/0.9mm bare fiber) -46~10(1310nm) -50~10(1550nm) Signal Power Test Range(dBm, CW/0.9mm bare fiber) -50~+10 Signal Frequency Display (Hz) 270, 1k, 2k Frequency Test Range(dBm, Average Value) 0.9, 2.0, 3.0 -30~0 (270Hz,1KHz) -25~0 (2KHz) 0.25 -25~0 (1KHz,2KHz) -20~0 (2KHz) Insertion Loss(dB, Typical Value) 0.8 (1310nm) 2.5 (1550nm) Alkaline Battery(V) 2pcs AAA batteries Operating Temperature() -10�+60 Storage Temperature() -25�+70 Dimension (mm) 196X30.5X27 Weight (g) 195
Have a nice day! I am Minhaj Hussian from Cashtel China, I have the following equipment's for sale. Please contact me if you are interested or share your important requirements with me. Part Number: 3HE02774AA Unit price: 1570USD at each Condition: refurbished Quantity available: 2 Lead time: 8 working days Warranty: 3 months -----------------------------------------------------------------------------
These SFP transceivers are of high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF. The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA. Features: ·Data-rate of 1.25Gbps operation ·850nm VCSEL laser and PIN photodetector ·Compliant with SFP MSA and SFF-8472 with duplex LC receptacle ·Digital Diagnostic Monitoring: ·Internal Calibration or External Calibration ·500m transmission with 50/125um MMF ·300m transmission with 62.5/125um MMF ·Compatible with RoHS ·+3.3V single power supply ·Operating case temperature: Standard: 0 to +70°C Extended: -20 to +85°C Applications: ·Gigabit Ethernet ·Fiber Channel ·Switch to Switch interface ·Switched backplane applications ·Router/Server interface ·Other optical transmission systems OEM & Customs Partnering with a variety of world class OEM manufacturers over 8 years, Fiberstore is able to provide customized and cost-effective solutions of high quality for all needs and specifications, including Optical design, Mechanical design, Printed Circuit Board (PCB) layout and Electrical design, Software & Firmware design, Integrated assembly, Specific labels, etc. Why you choose Sophenol be one of your partner? 01. Professional manufacturer, 100% tested, free samples are available. 02. OEM service with 12-year experiences, manufacture as per your request. 03. Standard stock, fast turnarounds. 04. Customers solutions in days, not weeks. 05. Warmly services with careful attentions. 06. Can provide your specific inquiry within 24 hours. 07. Save much costs, bring more benifits for customer to expand business.
This QSFP+ module is a parallel 40Gbps Quad Small Form-factor Pluggable (QSFP+) optical module. It provides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate data rate of 40Gbps over 100 meters of OM3 multi-mode fiber. Features: 4 independent full-duplex channels Up to 11.2Gbps data rateper channel MTP MPO optical connector QSFP+ MSA compliant Digital diagnostic capabilities Capable of over 100m transmission on OM3multi-mode ribbon fiber CML compatible electrical I/O Single +3.3V power supply Operating case temperature: 0~70? XLPPI electric interface (with 1.5W Max power) RoHS-6 compliant Applications: Rack to rack Data Center Infiniband QDR, DDR and SDR 40G Ethernet OEM & Customs Partnering with a variety of world class OEM manufacturers over 8 years, Fiberstore is able to provide customized and cost-effective solutions of high quality for all needs and specifications, including Optical design, Mechanical design, Printed Circuit Board (PCB) layout and Electrical design, Software & Firmware design, Integrated assembly, Specific labels, etc.
Sophenol's fiber optic wall mount box provides efficient cable connections between outside plant cables and equipmentinside the buildings and communication facilities. Available for small capacity communication system.Box integrates fiber splicing, storage and cable connections together in a unit. They can manage both round type orribbon type fiber cables. It is with large working space to integrate the pigtail, cables and adapters for fiber management. Applications: ·FTTH Access Networks ·Telecommunication Networks ·CATV Networks ·Data Communications Networks ·Local Area Networks Features: ·Wall mounted with mechanical protection function ·Deploys face and side face door ·Max fiber capacity 24 fibers ·Available for SC, ST, FC, LC duplex adapters ·Hinge and convenient press-pull button lock design ·Can be installed on wall Specifications: ·Dimension(LxWxH): 455x405x80 mm ·Adapter Types: SC Simplex ·Capacity: 24 Ports
